All of lore.kernel.org
 help / color / mirror / Atom feed
From: Akash Asthana <akashast@codeaurora.org>
To: gregkh@linuxfoundation.org
Cc: swboyd@chromium.org, mgautam@codeaurora.org,
	linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org,
	Akash Asthana <akashast@codeaurora.org>
Subject: [PATCH v6 2/5] Revert "tty: serial: qcom_geni_serial: IRQ cleanup"
Date: Fri, 22 Nov 2019 14:18:08 +0000	[thread overview]
Message-ID: <0101016e937a3077-0e4686f8-fad9-4592-b428-17be97b39fed-000000@us-west-2.amazonses.com> (raw)
In-Reply-To: <1574432266-20732-1-git-send-email-akashast@codeaurora.org>

This reverts commit 3e4aaea7a0391d47f6ffff1f10594c658a67c881.

To apply v6 patches cleanly on tty-next branch, revert v2 patches.

Signed-off-by: Akash Asthana <akashast@codeaurora.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 5180cd8..14c6306 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -9,7 +9,6 @@
 #include <linux/console.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
-#include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -831,7 +830,7 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
 	if (uart_console(uport))
 		console_stop(uport->cons);
 
-	disable_irq(uport->irq);
+	free_irq(uport->irq, uport);
 	spin_lock_irqsave(&uport->lock, flags);
 	qcom_geni_serial_stop_tx(uport);
 	qcom_geni_serial_stop_rx(uport);
@@ -891,14 +890,21 @@ static int qcom_geni_serial_startup(struct uart_port *uport)
 	int ret;
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 
+	scnprintf(port->name, sizeof(port->name),
+		  "qcom_serial_%s%d",
+		(uart_console(uport) ? "console" : "uart"), uport->line);
+
 	if (!port->setup) {
 		ret = qcom_geni_serial_port_setup(uport);
 		if (ret)
 			return ret;
 	}
-	enable_irq(uport->irq);
 
-	return 0;
+	ret = request_irq(uport->irq, qcom_geni_serial_isr, IRQF_TRIGGER_HIGH,
+							port->name, uport);
+	if (ret)
+		dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret);
+	return ret;
 }
 
 static unsigned long get_clk_cfg(unsigned long clk_freq)
@@ -1291,21 +1297,11 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS;
 	port->tx_fifo_width = DEF_FIFO_WIDTH_BITS;
 
-	scnprintf(port->name, sizeof(port->name), "qcom_geni_serial_%s%d",
-		(uart_console(uport) ? "console" : "uart"), uport->line);
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 	uport->irq = irq;
 
-	irq_set_status_flags(uport->irq, IRQ_NOAUTOEN);
-	ret = devm_request_irq(uport->dev, uport->irq, qcom_geni_serial_isr,
-			IRQF_TRIGGER_HIGH, port->name, uport);
-	if (ret) {
-		dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret);
-		return ret;
-	}
-
 	uport->private_data = drv;
 	platform_set_drvdata(pdev, port);
 	port->handle_rx = console ? handle_rx_console : handle_rx_uart;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project


  parent reply	other threads:[~2019-11-22 14:18 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1574432266-20732-1-git-send-email-akashast@codeaurora.org>
2019-11-22 14:18 ` [PATCH v6 1/5] Revert "tty: serial: qcom_geni_serial: Wakeup over UART RX" Akash Asthana
2019-11-22 14:18 ` Akash Asthana [this message]
2019-11-22 14:18 ` [PATCH v6 3/5] tty: serial: qcom_geni_serial: IRQ cleanup Akash Asthana
2019-11-22 18:46   ` Matthias Kaehlcke
2019-11-25 12:04     ` Akash Asthana
2019-11-22 14:18 ` [PATCH v6 4/5] tty: serial: qcom_geni_serial: Wakeup over UART RX Akash Asthana
2019-11-22 18:22   ` Stephen Boyd
2019-11-25 12:06     ` Akash Asthana
2019-11-22 19:11   ` Matthias Kaehlcke
2019-11-25 12:06     ` Akash Asthana
2019-11-22 14:18 ` [PATCH v6 5/5] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP Akash Asthana
2019-11-22 18:07   ` Stephen Boyd
     [not found] ` <0101016e937a3f78-11fa1469-8c73-4f56-a3de-3221dcf6f0e3-000000@us-west-2.amazonses.com>
2019-11-22 18:15   ` [PATCH v6 3/5] tty: serial: qcom_geni_serial: IRQ cleanup Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0101016e937a3077-0e4686f8-fad9-4592-b428-17be97b39fed-000000@us-west-2.amazonses.com \
    --to=akashast@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mgautam@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.