From: Michal Simek <michal.simek@xilinx.com> To: linux-kernel@vger.kernel.org, monstr@monstr.eu, michal.simek@xilinx.com, git@xilinx.com Cc: Kalyani Akula <kalyani.akula@xilinx.com>, Krzysztof Kozlowski <krzk@kernel.org>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 10/12] arm64: dts: zynqmp: Add missing lpd watchdog node Date: Thu, 21 Jan 2021 11:26:58 +0100 [thread overview] Message-ID: <0489a1d5528614f1d570ea153d38b813f0c1eb9f.1611224800.git.michal.simek@xilinx.com> (raw) In-Reply-To: <cover.1611224800.git.michal.simek@xilinx.com> Xilinx ZynqMP SoC has FPD (Full Power Domain) and LPD (Low Power Domain) watchdogs. There are cases where also LPD WDT should be used by Arm cores that's why list it with disabled status. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: None arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 4 ++++ arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 9 +++++++++ 2 files changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index 6a577e1383c1..3ca7e4ee51b5 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -223,3 +223,7 @@ &usb1 { &watchdog0 { clocks = <&zynqmp_clk WDT>; }; + +&lpd_watchdog { + clocks = <&zynqmp_clk LPD_WDT>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 533c19b80283..467f92c2044b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -786,5 +786,14 @@ watchdog0: watchdog@fd4d0000 { reg = <0x0 0xfd4d0000 0x0 0x1000>; timeout-sec = <10>; }; + + lpd_watchdog: watchdog@ff150000 { + compatible = "cdns,wdt-r1p2"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 52 1>; + reg = <0x0 0xff150000 0x0 0x1000>; + timeout-sec = <10>; + }; }; }; -- 2.30.0
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@xilinx.com> To: linux-kernel@vger.kernel.org, monstr@monstr.eu, michal.simek@xilinx.com, git@xilinx.com Cc: devicetree@vger.kernel.org, Krzysztof Kozlowski <krzk@kernel.org>, Rob Herring <robh+dt@kernel.org>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Kalyani Akula <kalyani.akula@xilinx.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 10/12] arm64: dts: zynqmp: Add missing lpd watchdog node Date: Thu, 21 Jan 2021 11:26:58 +0100 [thread overview] Message-ID: <0489a1d5528614f1d570ea153d38b813f0c1eb9f.1611224800.git.michal.simek@xilinx.com> (raw) In-Reply-To: <cover.1611224800.git.michal.simek@xilinx.com> Xilinx ZynqMP SoC has FPD (Full Power Domain) and LPD (Low Power Domain) watchdogs. There are cases where also LPD WDT should be used by Arm cores that's why list it with disabled status. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: None arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 4 ++++ arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 9 +++++++++ 2 files changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index 6a577e1383c1..3ca7e4ee51b5 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -223,3 +223,7 @@ &usb1 { &watchdog0 { clocks = <&zynqmp_clk WDT>; }; + +&lpd_watchdog { + clocks = <&zynqmp_clk LPD_WDT>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 533c19b80283..467f92c2044b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -786,5 +786,14 @@ watchdog0: watchdog@fd4d0000 { reg = <0x0 0xfd4d0000 0x0 0x1000>; timeout-sec = <10>; }; + + lpd_watchdog: watchdog@ff150000 { + compatible = "cdns,wdt-r1p2"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 52 1>; + reg = <0x0 0xff150000 0x0 0x1000>; + timeout-sec = <10>; + }; }; }; -- 2.30.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-21 10:34 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-21 10:26 [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 01/12] arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111 Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 02/12] arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106 Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 03/12] arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111 Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 04/12] arm64: dts: zynqmp: Enable reset controller driver Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 22:38 ` Laurent Pinchart 2021-01-21 22:38 ` Laurent Pinchart 2021-01-21 10:26 ` [PATCH v2 05/12] arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106 Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 06/12] arm64: dts: zynqmp: Add label for zynqmp_ipi Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 07/12] arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 08/12] arm64: dts: zynqmp: Wire arasan nand controller Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 09/12] arm64: dts: zynqmp: Wire zynqmp qspi controller Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` Michal Simek [this message] 2021-01-21 10:26 ` [PATCH v2 10/12] arm64: dts: zynqmp: Add missing lpd watchdog node Michal Simek 2021-01-21 10:26 ` [PATCH v2 11/12] arm64: dts: zynqmp: Add missing iommu IDs Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:27 ` [PATCH v2 12/12] arm64: dts: zynqmp: Add description for zcu104 revC Michal Simek 2021-01-21 10:27 ` Michal Simek 2021-02-01 9:38 ` Michal Simek 2021-02-01 9:38 ` Michal Simek 2021-02-01 9:36 ` [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers Michal Simek 2021-02-01 9:36 ` Michal Simek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=0489a1d5528614f1d570ea153d38b813f0c1eb9f.1611224800.git.michal.simek@xilinx.com \ --to=michal.simek@xilinx.com \ --cc=devicetree@vger.kernel.org \ --cc=git@xilinx.com \ --cc=kalyani.akula@xilinx.com \ --cc=krzk@kernel.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=monstr@monstr.eu \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.