From: Eduardo Valentin <eduardo.valentin@nokia.com>
To: Hans Verkuil <hverkuil@xs4all.nl>,
Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: "Nurkkala Eero.An (EXT-Offcode/Oulu)"
<ext-Eero.Nurkkala@nokia.com>,
"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
Eduardo Valentin <eduardo.valentin@nokia.com>
Subject: [PATCHv4 5 of 8] FMTx: si4713: Add files to handle si4713 i2c device
Date: Wed, 27 May 2009 12:35:52 +0300 [thread overview]
Message-ID: <1243416955-29748-6-git-send-email-eduardo.valentin@nokia.com> (raw)
In-Reply-To: <1243416955-29748-5-git-send-email-eduardo.valentin@nokia.com>
# HG changeset patch
# User Eduardo Valentin <eduardo.valentin@nokia.com>
# Date 1243414606 -10800
# Branch export
# Node ID 94b5043b692a6218a667326536d3d76a0c591307
# Parent 85b64a6cc67c0c0d6a795388f8ca02dad2ff9da7
This patch adds files to control si4713 devices.
Internal functions to control device properties
and initialization procedures are into these files.
Also, a v4l2 subdev interface is also exported.
This way other drivers can use this as v4l2 i2c subdevice.
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
---
drivers/media/linux/radio/si4713-subdev.c | 1008 +++++++++++++++++
drivers/media/linux/radio/si4713.c | 2100 +++++++++++++++++++++++++++++++++++
drivers/media/linux/radio/si4713.h | 282 +++++
3 files changed, 3390 insertions(+), 0 deletions(-)
create mode 100644 drivers/media/linux/radio/si4713-subdev.c
create mode 100644 drivers/media/linux/radio/si4713.c
create mode 100644 drivers/media/linux/radio/si4713.h
diff -r 85b64a6cc67c -r 94b5043b692a linux/drivers/media/linux/radio/si4713-subdev.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux/drivers/media/linux/radio/si4713-subdev.c Wed May 27 11:56:46 2009 +0300
@@ -0,0 +1,1008 @@
+/*
+ * drivers/media/linux/radio/si4713.c
+ *
+ * Silicon Labs Si4713 FM Radio Transmitter I2C commands.
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <media/linux/v4l2-device.h>
+#include <media/linux/v4l2-ioctl.h>
+#include <media/linux/v4l2-i2c-drv.h>
+
+#include "si4713.h"
+
+#define DEFAULT_RDS_PI 0x00
+#define DEFAULT_RDS_PTY 0x00
+#define DEFAULT_RDS_PS_NAME "Si4713 "
+#define DEFAULT_RDS_RADIO_TEXT DEFAULT_RDS_PS_NAME
+#define DEFAULT_RDS_DEVIATION 0x00C8
+#define DEFAULT_RDS_PS_REPEAT_COUNT 0x0003
+#define DEFAULT_LIMITER_RTIME 0x1392
+#define DEFAULT_LIMITER_DEV 0x102CA
+#define DEFAULT_PILOT_FREQUENCY 0x4A38
+#define DEFAULT_PILOT_DEVIATION 0x1A5E
+#define DEFAULT_ACOMP_ATIME 0x0000
+#define DEFAULT_ACOMP_RTIME 0xF4240L
+#define DEFAULT_ACOMP_GAIN 0x0F
+#define DEFAULT_ACOMP_THRESHOLD (-0x28)
+#define DEFAULT_MUTE 0x00
+#define DEFAULT_POWER_LEVEL 88
+#define DEFAULT_TUNE_RSSI 0xFF
+
+#define to_si4713_device(sd) container_of(sd, struct si4713_device, sd)
+
+/* frequency domain transformation (using times 10 to avoid floats) */
+#define FREQDEV_UNIT 100000
+#define FREQV4L2_MULTI 625
+#define dev_to_v4l2(f) ((f * FREQDEV_UNIT) / FREQV4L2_MULTI)
+#define v4l2_to_dev(f) ((f * FREQV4L2_MULTI) / FREQDEV_UNIT)
+
+/*
+ * Sysfs properties
+ * Read and write functions
+ */
+#define property_write(prop, type, mask, check) \
+static ssize_t si4713_##prop##_write(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, \
+ size_t count) \
+{ \
+ struct si4713_device *sdev = dev_get_drvdata(dev); \
+ type value; \
+ int rval; \
+ \
+ if (!sdev) \
+ return -ENODEV; \
+ \
+ sscanf(buf, mask, &value); \
+ \
+ if (check) \
+ return -EDOM; \
+ \
+ rval = si4713_set_##prop(sdev, value); \
+ \
+ return rval < 0 ? rval : count; \
+}
+
+#define property_read(prop, size, mask) \
+static ssize_t si4713_##prop##_read(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct si4713_device *sdev = dev_get_drvdata(dev); \
+ size value; \
+ \
+ if (!sdev) \
+ return -ENODEV; \
+ \
+ value = si4713_get_##prop(sdev); \
+ \
+ if (value >= 0) \
+ value = sprintf(buf, mask "\n", value); \
+ \
+ return value; \
+}
+
+#define DEFINE_SYSFS_PROPERTY(prop, signal, size, mask, check) \
+property_write(prop, signal size, mask, check) \
+property_read(prop, size, mask) \
+static DEVICE_ATTR(prop, S_IRUGO | S_IWUSR, si4713_##prop##_read, \
+ si4713_##prop##_write);
+#define DEFINE_SYSFS_PROPERTY_RO(prop, signal, size, mask) \
+property_read(prop, size, mask) \
+static DEVICE_ATTR(prop, S_IRUGO, si4713_##prop##_read, NULL);
+
+
+#define property_str_write(prop, size) \
+static ssize_t si4713_##prop##_write(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, \
+ size_t count) \
+{ \
+ struct si4713_device *sdev = dev_get_drvdata(dev); \
+ int rval; \
+ u8 *in; \
+ \
+ if (!sdev) \
+ return -ENODEV; \
+ \
+ in = kzalloc(size + 1, GFP_KERNEL); \
+ if (!in) \
+ return -ENOMEM; \
+ \
+ /* We don't want to miss the spaces */ \
+ strncpy(in, buf, size); \
+ rval = si4713_set_##prop(sdev, in); \
+ \
+ kfree(in); \
+ \
+ return rval < 0 ? rval : count; \
+}
+
+#define property_str_read(prop, size) \
+static ssize_t si4713_##prop##_read(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct si4713_device *sdev = dev_get_drvdata(dev); \
+ int count; \
+ u8 *out; \
+ \
+ if (!sdev) \
+ return -ENODEV; \
+ \
+ out = kzalloc(size + 1, GFP_KERNEL); \
+ if (!out) \
+ return -ENOMEM; \
+ \
+ si4713_get_##prop(sdev, out); \
+ count = sprintf(buf, "%s\n", out); \
+ \
+ kfree(out); \
+ \
+ return count; \
+}
+
+#define DEFINE_SYSFS_PROPERTY_STR(prop, size) \
+property_str_write(prop, size) \
+property_str_read(prop, size) \
+static DEVICE_ATTR(prop, S_IRUGO | S_IWUSR, si4713_##prop##_read, \
+ si4713_##prop##_write);
+
+/*
+ * Power level property
+ */
+/* power_level (rw) 88 - 115 or 0 */
+static ssize_t si4713_power_level_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct si4713_device *sdev = dev_get_drvdata(dev);
+ unsigned int p;
+ int rval, pl;
+
+ if (!sdev) {
+ rval = -ENODEV;
+ goto exit;
+ }
+
+ sscanf(buf, "%u", &p);
+
+ pl = si4713_get_power_level(sdev);
+ if (pl < 0) {
+ rval = pl;
+ goto exit;
+ }
+
+ rval = si4713_set_power_level(sdev, p);
+
+exit:
+ return rval < 0 ? rval : count;
+}
+property_read(power_level, unsigned int, "%u")
+static DEVICE_ATTR(power_level, S_IRUGO | S_IWUSR, si4713_power_level_read,
+ si4713_power_level_write);
+
+DEFINE_SYSFS_PROPERTY(antenna_capacitor, unsigned, int, "%u",
+ value > SI4713_MAX_ANTCAP)
+/*
+ * RDS properties
+ */
+/* rds_pi (rw) 0 - 0xFFFF */
+DEFINE_SYSFS_PROPERTY(rds_pi, unsigned, int, "%x", 0)
+/* rds_pty (rw) 0 - 0x1F */
+DEFINE_SYSFS_PROPERTY(rds_pty, unsigned, int, "%u", value > MAX_RDS_PTY)
+/* rds_enabled (rw) 0 - 1 */
+DEFINE_SYSFS_PROPERTY(rds_enabled, unsigned, int, "%u", 0)
+/* rds_ps_name (rw) strlen (8 - 96) */
+DEFINE_SYSFS_PROPERTY_STR(rds_ps_name, MAX_RDS_PS_NAME)
+/* rds_radio_text (rw) strlen (0 - 384) */
+DEFINE_SYSFS_PROPERTY_STR(rds_radio_text, MAX_RDS_RADIO_TEXT)
+
+/*
+ * Limiter properties
+ */
+/* limiter_release_time (rw) 0 - 102390 */
+DEFINE_SYSFS_PROPERTY(limiter_release_time, unsigned, long, "%lu",
+ value > MAX_LIMITER_RELEASE_TIME)
+/* limiter_deviation (rw) 0 - 90000 */
+DEFINE_SYSFS_PROPERTY(limiter_deviation, unsigned, long, "%lu",
+ value > MAX_LIMITER_DEVIATION)
+/* limiter_enabled (rw) 0 - 1 */
+DEFINE_SYSFS_PROPERTY(limiter_enabled, unsigned, int, "%u", 0)
+
+/*
+ * Pilot tone properties
+ */
+/* pilot_frequency (rw) 0 - 19000 */
+DEFINE_SYSFS_PROPERTY(pilot_frequency, unsigned, int, "%u",
+ value > MAX_PILOT_FREQUENCY)
+/* pilot_deviation (rw) 0 - 90000 */
+DEFINE_SYSFS_PROPERTY(pilot_deviation, unsigned, long, "%lu",
+ value > MAX_PILOT_DEVIATION)
+/* pilot_enabled (rw) 0 - 1 */
+DEFINE_SYSFS_PROPERTY(pilot_enabled, unsigned, int, "%u", 0)
+
+/*
+ * Stereo properties
+ */
+/* stereo_enabled (rw) 0 - 1 */
+DEFINE_SYSFS_PROPERTY(stereo_enabled, unsigned, int, "%u", 0)
+
+/*
+ * Audio Compression properties
+ */
+/* acomp_release_time (rw) 0 - 1000000 */
+DEFINE_SYSFS_PROPERTY(acomp_release_time, unsigned, long, "%lu",
+ value > MAX_ACOMP_RELEASE_TIME)
+/* acomp_attack_time (rw) 0 - 5000 */
+DEFINE_SYSFS_PROPERTY(acomp_attack_time, unsigned, int, "%u",
+ value > MAX_ACOMP_ATTACK_TIME)
+/* acomp_threshold (rw) -40 - 0 */
+property_write(acomp_threshold, int, "%d",
+ value > MAX_ACOMP_THRESHOLD ||
+ value < MIN_ACOMP_THRESHOLD)
+
+static ssize_t si4713_acomp_threshold_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct si4713_device *sdev = dev_get_drvdata(dev);
+ int count;
+ s8 thres;
+
+ if (!sdev)
+ return -ENODEV;
+
+ count = si4713_get_acomp_threshold(sdev, &thres);
+
+ if (count >= 0)
+ count = sprintf(buf, "%d\n", thres);
+
+ return count;
+}
+static DEVICE_ATTR(acomp_threshold, S_IRUGO | S_IWUSR,
+ si4713_acomp_threshold_read,
+ si4713_acomp_threshold_write);
+
+/* acomp_gain (rw) 0 - 20 */
+DEFINE_SYSFS_PROPERTY(acomp_gain, unsigned, int, "%u", value > MAX_ACOMP_GAIN)
+/* acomp_enabled (rw) 0 - 1 */
+DEFINE_SYSFS_PROPERTY(acomp_enabled, unsigned, int, "%u", 0)
+
+/* Tune_measure (rw) */
+DEFINE_SYSFS_PROPERTY(tune_measure, unsigned, int, "%u", 0)
+
+/* Preemphasis property */
+DEFINE_SYSFS_PROPERTY(preemphasis, unsigned, int, "%u",
+ ((value != PREEMPHASIS_USA) &&
+ (value != PREEMPHASIS_EU) &&
+ (value != PREEMPHASIS_DISABLED)))
+
+static struct attribute *attrs[] = {
+ &dev_attr_power_level.attr,
+ &dev_attr_antenna_capacitor.attr,
+ &dev_attr_rds_pi.attr,
+ &dev_attr_rds_pty.attr,
+ &dev_attr_rds_ps_name.attr,
+ &dev_attr_rds_radio_text.attr,
+ &dev_attr_rds_enabled.attr,
+ &dev_attr_limiter_release_time.attr,
+ &dev_attr_limiter_deviation.attr,
+ &dev_attr_limiter_enabled.attr,
+ &dev_attr_pilot_frequency.attr,
+ &dev_attr_pilot_deviation.attr,
+ &dev_attr_pilot_enabled.attr,
+ &dev_attr_stereo_enabled.attr,
+ &dev_attr_acomp_release_time.attr,
+ &dev_attr_acomp_attack_time.attr,
+ &dev_attr_acomp_threshold.attr,
+ &dev_attr_acomp_gain.attr,
+ &dev_attr_acomp_enabled.attr,
+ &dev_attr_preemphasis.attr,
+ &dev_attr_tune_measure.attr,
+ NULL,
+};
+
+static const struct attribute_group attr_group = {
+ .attrs = attrs,
+};
+
+static irqreturn_t si4713_handler(int irq, void *dev)
+{
+ struct si4713_device *sdev = dev;
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+
+ dev_dbg(&client->dev, "IRQ called, signaling completion work\n");
+ complete(&sdev->work);
+
+ return IRQ_HANDLED;
+}
+
+static int si4713_write_econtrol(struct si4713_device *sdev,
+ struct v4l2_ext_control *control)
+{
+
+ s32 rval = 0;
+ const int pval[] = {
+ PREEMPHASIS_DISABLED,
+ PREEMPHASIS_EU,
+ PREEMPHASIS_USA,
+ };
+
+ switch (control->id) {
+ /* User class controls */
+ case V4L2_CID_AUDIO_MUTE:
+ rval = si4713_set_mute(sdev, control->value);
+ break;
+ /* FMTX class controls */
+ case V4L2_CID_RDS_ENABLED:
+ rval = si4713_set_rds_enabled(sdev, control->value);
+ break;
+ case V4L2_CID_RDS_PI:
+ rval = si4713_set_rds_pi(sdev, control->value);
+ break;
+ case V4L2_CID_RDS_PTY:
+ rval = si4713_set_rds_pty(sdev, control->value);
+ break;
+ /* TODO: String controls not implemented yet */
+ case V4L2_CID_RDS_PS_NAME:
+ case V4L2_CID_RDS_RADIO_TEXT:
+ break;
+
+ case V4L2_CID_AUDIO_LIMITER_ENABLED:
+ rval = si4713_set_limiter_enabled(sdev, control->value);
+ break;
+ case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
+ rval = si4713_set_limiter_release_time(sdev, control->value);
+ break;
+ case V4L2_CID_AUDIO_LIMITER_DEVIATION:
+ rval = si4713_set_limiter_deviation(sdev, control->value);
+ break;
+
+ case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
+ rval = si4713_set_acomp_enabled(sdev, control->value);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_GAIN:
+ rval = si4713_set_acomp_gain(sdev, control->value);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
+ rval = si4713_set_acomp_threshold(sdev, control->value);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
+ rval = si4713_set_acomp_attack_time(sdev, control->value);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
+ rval = si4713_set_acomp_release_time(sdev, control->value);
+ break;
+
+ case V4L2_CID_PILOT_TONE_ENABLED:
+ rval = si4713_set_pilot_enabled(sdev, control->value);
+ break;
+ case V4L2_CID_PILOT_TONE_DEVIATION:
+ rval = si4713_set_pilot_deviation(sdev, control->value);
+ break;
+ case V4L2_CID_PILOT_TONE_FREQUENCY:
+ rval = si4713_set_pilot_frequency(sdev, control->value);
+ break;
+
+ case V4L2_CID_PREEMPHASIS:
+ if (control->value >= ARRAY_SIZE(pval) || control->value < 0)
+ rval = -ERANGE;
+ else
+ rval = si4713_set_preemphasis(sdev,
+ pval[control->value]);
+ break;
+ case V4L2_CID_TUNE_POWER_LEVEL:
+ rval = si4713_set_power_level(sdev, control->value);
+ break;
+ case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+ rval = si4713_set_antenna_capacitor(sdev, control->value);
+ break;
+ default:
+ rval = -EINVAL;
+ break;
+ };
+
+ /* FIXME: There are properties with negative values */
+ if (rval >= 0) {
+ control->value = rval;
+ rval = 0;
+ }
+
+ return rval;
+}
+static int si4713_read_econtrol(struct si4713_device *sdev,
+ struct v4l2_ext_control *control)
+{
+
+ s32 rval = 0;
+ s8 val;
+
+ switch (control->id) {
+ /* User class controls */
+ case V4L2_CID_AUDIO_MUTE:
+ rval = si4713_get_mute(sdev);
+ break;
+ /* FMTX class controls */
+ case V4L2_CID_RDS_ENABLED:
+ rval = si4713_get_rds_enabled(sdev);
+ break;
+ case V4L2_CID_RDS_PI:
+ rval = si4713_get_rds_pi(sdev);
+ break;
+ case V4L2_CID_RDS_PTY:
+ rval = si4713_get_rds_pty(sdev);
+ break;
+ /* TODO: String controls not implemented yet */
+ case V4L2_CID_RDS_PS_NAME:
+ case V4L2_CID_RDS_RADIO_TEXT:
+ break;
+
+ case V4L2_CID_AUDIO_LIMITER_ENABLED:
+ rval = si4713_get_limiter_enabled(sdev);
+ break;
+ case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
+ rval = si4713_get_limiter_release_time(sdev);
+ break;
+ case V4L2_CID_AUDIO_LIMITER_DEVIATION:
+ rval = si4713_get_limiter_deviation(sdev);
+ break;
+
+ case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
+ rval = si4713_get_acomp_enabled(sdev);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_GAIN:
+ rval = si4713_get_acomp_gain(sdev);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
+ rval = si4713_get_acomp_threshold(sdev, &val);
+ if (rval == 0)
+ rval = val;
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
+ rval = si4713_get_acomp_attack_time(sdev);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
+ rval = si4713_get_acomp_release_time(sdev);
+ break;
+
+ case V4L2_CID_PILOT_TONE_ENABLED:
+ rval = si4713_get_pilot_enabled(sdev);
+ break;
+ case V4L2_CID_PILOT_TONE_DEVIATION:
+ rval = si4713_get_pilot_deviation(sdev);
+ break;
+ case V4L2_CID_PILOT_TONE_FREQUENCY:
+ rval = si4713_get_pilot_frequency(sdev);
+ break;
+
+ case V4L2_CID_PREEMPHASIS:
+ rval = si4713_get_preemphasis(sdev);
+ break;
+ case V4L2_CID_TUNE_POWER_LEVEL:
+ rval = si4713_get_power_level(sdev);
+ break;
+ case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+ rval = si4713_get_antenna_capacitor(sdev);
+ break;
+ default:
+ rval = -EINVAL;
+ break;
+ };
+
+ /* FIXME: There are properties with negative values */
+ if (rval >= 0) {
+ control->value = rval;
+ rval = 0;
+ }
+
+ return rval;
+}
+
+/*
+ * Video4Linux Subdev Interface
+ */
+
+/*
+ * si4713_s_ext_ctrls - set extended controls value
+ */
+static int si4713_s_ext_ctrls(struct v4l2_subdev *sd,
+ struct v4l2_ext_controls *ctrls)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int i;
+
+ if (ctrls->ctrl_class != V4L2_CTRL_CLASS_FMTX)
+ return -EINVAL;
+
+ for (i = 0; i < ctrls->count; i++) {
+ int err = si4713_write_econtrol(sdev, ctrls->controls + i);
+
+ if (err < 0) {
+ ctrls->error_idx = i;
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * si4713_g_ext_ctrls - get extended controls value
+ */
+static int si4713_g_ext_ctrls(struct v4l2_subdev *sd,
+ struct v4l2_ext_controls *ctrls)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int i;
+
+ if (ctrls->ctrl_class != V4L2_CTRL_CLASS_FMTX)
+ return -EINVAL;
+
+ for (i = 0; i < ctrls->count; i++) {
+ int err = si4713_read_econtrol(sdev, ctrls->controls + i);
+
+ if (err < 0) {
+ ctrls->error_idx = i;
+ return err;
+ }
+ }
+
+ return 0;
+}
+/*
+ * si4713_queryctrl - enumerate control items
+ */
+static int si4713_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+ int rval = 0;
+
+ switch (qc->id) {
+ /* User class controls */
+ /* These are only for kradio and such apps */
+ case V4L2_CID_AUDIO_VOLUME:
+ case V4L2_CID_AUDIO_BALANCE:
+ case V4L2_CID_AUDIO_BASS:
+ case V4L2_CID_AUDIO_TREBLE:
+ case V4L2_CID_AUDIO_LOUDNESS:
+ rval = v4l2_ctrl_query_fill(qc, 0, 0, 0, 0);
+ qc->flags |= V4L2_CTRL_FLAG_DISABLED;
+ break;
+ case V4L2_CID_AUDIO_MUTE:
+ rval = v4l2_ctrl_query_fill(qc, 0, 1, 1, DEFAULT_MUTE);
+ break;
+ /* FMTX class controls */
+ case V4L2_CID_RDS_ENABLED:
+ rval = v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
+ break;
+ case V4L2_CID_RDS_PI:
+ rval = v4l2_ctrl_query_fill(qc, 0, 0xFFFF, 1, DEFAULT_RDS_PI);
+ break;
+ case V4L2_CID_RDS_PTY:
+ rval = v4l2_ctrl_query_fill(qc, 0, 31, 1, DEFAULT_RDS_PTY);
+ break;
+ /* TODO: String controls not implemented yet */
+ case V4L2_CID_RDS_PS_NAME:
+ rval = v4l2_ctrl_query_fill(qc, 0, 0, 0, 0);
+ break;
+ case V4L2_CID_RDS_RADIO_TEXT:
+ rval = v4l2_ctrl_query_fill(qc, 0, 0, 0, 0);
+ break;
+
+ case V4L2_CID_AUDIO_LIMITER_ENABLED:
+ rval = v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
+ break;
+ case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
+ rval = v4l2_ctrl_query_fill(qc, 250, MAX_LIMITER_RELEASE_TIME,
+ 50, DEFAULT_LIMITER_RTIME);
+ break;
+ case V4L2_CID_AUDIO_LIMITER_DEVIATION:
+ rval = v4l2_ctrl_query_fill(qc, 0, MAX_LIMITER_DEVIATION,
+ 10, DEFAULT_LIMITER_DEV);
+ break;
+
+ case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
+ rval = v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_GAIN:
+ rval = v4l2_ctrl_query_fill(qc, 0, MAX_ACOMP_GAIN, 1,
+ DEFAULT_ACOMP_GAIN);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
+ rval = v4l2_ctrl_query_fill(qc, MIN_ACOMP_THRESHOLD,
+ MAX_ACOMP_THRESHOLD, 1,
+ DEFAULT_ACOMP_THRESHOLD);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
+ rval = v4l2_ctrl_query_fill(qc, 0, MAX_ACOMP_ATTACK_TIME,
+ 500, DEFAULT_ACOMP_ATIME);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
+ rval = v4l2_ctrl_query_fill(qc, 100000, MAX_ACOMP_RELEASE_TIME,
+ 100000, DEFAULT_ACOMP_RTIME);
+ break;
+
+ case V4L2_CID_PILOT_TONE_ENABLED:
+ rval = v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
+ break;
+ case V4L2_CID_PILOT_TONE_DEVIATION:
+ rval = v4l2_ctrl_query_fill(qc, 0, MAX_PILOT_DEVIATION,
+ 10, DEFAULT_PILOT_DEVIATION);
+ break;
+ case V4L2_CID_PILOT_TONE_FREQUENCY:
+ rval = v4l2_ctrl_query_fill(qc, 0, MAX_PILOT_FREQUENCY,
+ 1, DEFAULT_PILOT_FREQUENCY);
+ break;
+
+ case V4L2_CID_PREEMPHASIS:
+ rval = v4l2_ctrl_query_fill(qc, V4L2_FMTX_PREEMPHASIS_DISABLED,
+ V4L2_FMTX_PREEMPHASIS_75_uS,
+ 1, V4L2_FMTX_PREEMPHASIS_50_uS);
+ break;
+ case V4L2_CID_TUNE_POWER_LEVEL:
+ rval = v4l2_ctrl_query_fill(qc, 0, 120, 1, 88);
+ break;
+ case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+ rval = v4l2_ctrl_query_fill(qc, 0, 191, 1, 0);
+ break;
+ default:
+ rval = -EINVAL;
+ break;
+ };
+
+ return rval;
+}
+
+/*
+ * si4713_g_ctrl - get the value of a control
+ */
+static int si4713_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int rval = 0;
+
+ if (!sdev)
+ return -ENODEV;
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ rval = si4713_get_mute(sdev);
+ if (rval >= 0)
+ ctrl->value = rval;
+ break;
+ }
+
+ return rval;
+}
+
+/*
+ * si4713_s_ctrl - set the value of a control
+ */
+static int si4713_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int rval = 0;
+
+ if (!sdev)
+ return -ENODEV;
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ if (ctrl->value) {
+ rval = si4713_set_mute(sdev, ctrl->value);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_power_state(sdev, POWER_DOWN);
+ } else {
+ rval = si4713_set_power_state(sdev, POWER_UP);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_setup(sdev);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_mute(sdev, ctrl->value);
+ }
+ break;
+ }
+
+exit:
+ return rval;
+}
+
+static const struct v4l2_subdev_core_ops si4713_subdev_core_ops = {
+ .try_ext_ctrls = NULL,
+ .g_chip_ident = NULL,
+ .log_status = NULL,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = NULL,
+ .s_register = NULL,
+#endif
+ .queryctrl = si4713_queryctrl,
+ .g_ext_ctrls = si4713_g_ext_ctrls,
+ .s_ext_ctrls = si4713_s_ext_ctrls,
+ .g_ctrl = si4713_g_ctrl,
+ .s_ctrl = si4713_s_ctrl,
+ .ioctl = NULL,
+ .querymenu = NULL,
+ .init = NULL,
+ .load_fw = NULL,
+ .reset = NULL,
+ .s_gpio = NULL,
+ .s_std = NULL,
+};
+
+/*
+ * si4713_g_tuner - get tuner attributes
+ */
+static int si4713_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *tuner)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int rval;
+
+ if (!sdev) {
+ rval = -ENODEV;
+ goto exit;
+ }
+
+ if (tuner->index > 0) {
+ rval = -EINVAL;
+ goto exit;
+ }
+
+ strncpy(tuner->name, "FM Transmitter", 32);
+ tuner->type = V4L2_TUNER_RADIO;
+ tuner->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
+ tuner->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
+
+ /* Report current frequency range limits */
+ tuner->rangelow = dev_to_v4l2(7600);
+ tuner->rangehigh = dev_to_v4l2(10800);
+
+ /* Report current audio mode: mono or stereo */
+ tuner->audmode = V4L2_TUNER_MODE_MONO;
+ rval = si4713_get_stereo_enabled(sdev);
+ if (rval < 0)
+ goto exit;
+ if (rval)
+ tuner->audmode |= V4L2_TUNER_MODE_STEREO;
+
+ /* Report current signal length */
+ rval = si4713_get_tune_measure(sdev);
+ if (rval < 0)
+ goto exit;
+ tuner->signal = rval;
+
+ /* automatic frequency control: -1: freq to low, 1 freq to high */
+ tuner->afc = 0;
+
+exit:
+ return rval;
+}
+
+/*
+ * si4713_s_tuner - set tuner attributes
+ */
+static int si4713_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *tuner)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int rval;
+
+ if (!sdev) {
+ rval = -ENODEV;
+ goto exit;
+ }
+
+ if (tuner->index > 0) {
+ rval = -EINVAL;
+ goto exit;
+ }
+
+ /* Set audio mode: mono or stereo */
+ rval = si4713_set_stereo_enabled(sdev,
+ !!(tuner->audmode & V4L2_TUNER_MODE_STEREO));
+ if (rval < 0)
+ goto exit;
+
+ /* TODO: How to set frequency to measure current signal length */
+
+exit:
+ return rval;
+}
+
+/*
+ * si4713_g_frequency - get tuner or modulator radio frequency
+ */
+static int si4713_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int rval = 0;
+ int freq;
+
+ f->type = V4L2_TUNER_RADIO;
+ freq = si4713_get_frequency(sdev);
+
+ if (freq < 0)
+ rval = freq;
+ else
+ f->frequency = dev_to_v4l2(freq);
+
+ return rval;
+}
+
+/*
+ * si4713_s_frequency - set tuner or modulator radio frequency
+ */
+static int si4713_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int rval = 0;
+
+ if (f->type != V4L2_TUNER_RADIO) {
+ rval = -EINVAL;
+ goto exit;
+ }
+
+ rval = si4713_set_frequency(sdev, v4l2_to_dev(f->frequency));
+
+exit:
+ return rval;
+}
+
+static const struct v4l2_subdev_tuner_ops si4713_subdev_tuner_ops = {
+ .g_frequency = si4713_g_frequency,
+ .s_frequency = si4713_s_frequency,
+ .g_tuner = si4713_g_tuner,
+ .s_tuner = si4713_s_tuner,
+ .s_type_addr = NULL,
+ .s_config = NULL,
+ .s_standby = NULL,
+ .s_mode = NULL,
+ .s_radio = NULL,
+};
+
+static const struct v4l2_subdev_ops si4713_subdev_ops = {
+ .core = &si4713_subdev_core_ops,
+ .tuner = &si4713_subdev_tuner_ops,
+};
+
+/*
+ * I2C driver interface
+ */
+/*
+ * si4713_i2c_driver_probe - probe for the device
+ */
+static int si4713_i2c_driver_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct si4713_device *sdev;
+ int rval;
+
+ sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
+ if (!sdev) {
+ dev_dbg(&client->dev, "Failed to alloc video device.\n");
+ rval = -ENOMEM;
+ goto exit;
+ }
+
+ sdev->platform_data = client->dev.platform_data;
+ if (!sdev->platform_data) {
+ dev_err(&client->dev, "No platform data registered.\n");
+ rval = -ENODEV;
+ goto free_sdev;
+ }
+
+ v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);
+
+ mutex_init(&sdev->mutex);
+ init_completion(&sdev->work);
+
+ if (client->irq) {
+ rval = request_irq(client->irq,
+ si4713_handler, IRQF_TRIGGER_FALLING | IRQF_DISABLED,
+ client->name, sdev);
+ if (rval < 0) {
+ dev_err(&client->dev, "Could not request IRQ\n");
+ goto free_sdev;
+ }
+ dev_dbg(&client->dev, "IRQ requested.\n");
+ } else {
+ dev_info(&client->dev, "IRQ not configure. Using timeouts.\n");
+ }
+
+ rval = sysfs_create_group(&client->dev.kobj, &attr_group);
+ if (rval < 0) {
+ dev_err(&client->dev, "Could not register sysfs interface.\n");
+ goto free_irq;
+ }
+
+ rval = si4713_probe(sdev);
+ if (rval < 0) {
+ dev_err(&client->dev, "Failed to probe device information.\n");
+ goto free_sysfs;
+ }
+
+ return 0;
+
+free_sysfs:
+ sysfs_remove_group(&client->dev.kobj, &attr_group);
+free_irq:
+ if (client->irq)
+ free_irq(client->irq, sdev);
+free_sdev:
+ kfree(sdev);
+exit:
+ return rval;
+}
+
+/*
+ * si4713_i2c_driver_remove - remove the device
+ */
+static int __exit si4713_i2c_driver_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct si4713_device *sdev = to_si4713_device(sd);
+
+ /* our client isn't attached */
+ if (!client->adapter)
+ return -ENODEV;
+
+ if (sdev) {
+ sysfs_remove_group(&client->dev.kobj, &attr_group);
+
+ if (sdev->power_state)
+ si4713_set_power_state(sdev, POWER_DOWN);
+
+ if (client->irq > 0)
+ free_irq(client->irq, sdev);
+
+ v4l2_device_unregister_subdev(sd);
+
+ kfree(sdev);
+ }
+
+ return 0;
+}
+
+/*
+ * si4713_i2c_driver - i2c driver interface
+ */
+static const struct i2c_device_id si4713_id[] = {
+ { "si4713" , 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, si4713_id);
+
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "si4713",
+ .probe = si4713_i2c_driver_probe,
+ .remove = __exit_p(si4713_i2c_driver_remove),
+ .id_table = si4713_id,
+};
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@nokia.com>");
+MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter");
+MODULE_VERSION("0.0.1");
diff -r 85b64a6cc67c -r 94b5043b692a linux/drivers/media/linux/radio/si4713.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux/drivers/media/linux/radio/si4713.c Wed May 27 11:56:46 2009 +0300
@@ -0,0 +1,2100 @@
+/*
+ * drivers/media/linux/radio/si4713.c
+ *
+ * Silicon Labs Si4713 FM Radio Transmitter I2C commands.
+ *
+ * Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+
+#include "si4713.h"
+
+#define MAX_ARGS 7
+
+#define RDS_BLOCK 8
+#define RDS_BLOCK_CLEAR 0x03
+#define RDS_BLOCK_LOAD 0x04
+#define RDS_RADIOTEXT_2A 0x20
+#define RDS_RADIOTEXT_BLK_SIZE 4
+#define RDS_RADIOTEXT_INDEX_MAX 0x0F
+#define RDS_CARRIAGE_RETURN 0x0D
+
+#define rds_ps_nblocks(len) ((len / RDS_BLOCK) + (len % RDS_BLOCK ? 1 : 0))
+#define enable_rds(p) (p | (1 << 2))
+#define disable_rds(p) (p & ~(1 << 2))
+#define get_rds_status(p) ((p >> 2) & 0x01)
+
+#define enable_stereo(p) (p | (1 << 1))
+#define disable_stereo(p) (p & ~(1 << 1))
+#define get_stereo_status(p) ((p >> 1) & 0x01)
+
+#define enable_limiter(p) (p | (1 << 1))
+#define disable_limiter(p) (p & ~(1 << 1))
+#define get_limiter_status(p) ((p >> 1) & 0x01)
+
+#define enable_pilot(p) (p | (1 << 0))
+#define disable_pilot(p) (p & ~(1 << 0))
+#define get_pilot_status(p) ((p >> 0) & 0x01)
+
+#define enable_acomp(p) (p | (1 << 0))
+#define disable_acomp(p) (p & ~(1 << 0))
+#define get_acomp_status(p) ((p >> 0) & 0x01)
+#define ATTACK_TIME_UNIT 500
+
+#define DEFAULT_RDS_PI 0x00
+#define DEFAULT_RDS_PTY 0x00
+#define DEFAULT_RDS_PS_NAME "Si4713 "
+#define DEFAULT_RDS_RADIO_TEXT DEFAULT_RDS_PS_NAME
+#define DEFAULT_RDS_DEVIATION 0x00C8
+#define DEFAULT_RDS_PS_REPEAT_COUNT 0x0003
+#define DEFAULT_LIMITER_RTIME 0x1392
+#define DEFAULT_LIMITER_DEV 0x102CA
+#define DEFAULT_PILOT_FREQUENCY 0x4A38
+#define DEFAULT_PILOT_DEVIATION 0x1A5E
+#define DEFAULT_ACOMP_ATIME 0x0000
+#define DEFAULT_ACOMP_RTIME 0xF4240L
+#define DEFAULT_ACOMP_GAIN 0x0F
+#define DEFAULT_ACOMP_THRESHOLD (-0x28)
+#define DEFAULT_MUTE 0x00
+#define DEFAULT_POWER_LEVEL 88
+#define DEFAULT_FREQUENCY 8800
+#define DEFAULT_TUNE_RSSI 0xFF
+
+#define POWER_OFF 0x00
+#define POWER_ON 0x01
+
+#define msb(x) ((u8)((u16) x >> 8))
+#define lsb(x) ((u8)((u16) x & 0x00FF))
+#define compose_u16(msb, lsb) (((u16)msb << 8) | lsb)
+#define check_command_failed(status) (!(status & SI4713_CTS) || \
+ (status & SI4713_ERR))
+/* mute definition */
+#define set_mute(p) ((p & 1) | ((p & 1) << 1));
+#define get_mute(p) (p & 0x01)
+#define set_pty(v, pty) ((v & 0xFC1F) | (pty << 5))
+#define get_pty(v) ((v >> 5) & 0x1F)
+
+
+#ifdef DEBUG
+#define DBG_BUFFER(device, message, buffer, size) \
+ { \
+ int i; \
+ char str[(size)*5]; \
+ for (i = 0; i < size; i++) \
+ sprintf(str + i * 5, " 0x%02x", buffer[i]); \
+ dev_dbg(device, "%s:%s\n", message, str); \
+ }
+#else
+#define DBG_BUFFER(device, message, buffer, size)
+#endif
+
+/*
+ * Values for limiter release time
+ * device release
+ * value time (us)
+ */
+static unsigned long const limiter_times[] = {
+ 2000, 250,
+ 1000, 500,
+ 510, 1000,
+ 255, 2000,
+ 170, 3000,
+ 127, 4020,
+ 102, 5010,
+ 85, 6020,
+ 73, 7010,
+ 64, 7990,
+ 57, 8970,
+ 51, 10030,
+ 25, 20470,
+ 17, 30110,
+ 13, 39380,
+ 10, 51190,
+ 8, 63690,
+ 7, 73140,
+ 6, 85330,
+ 5, 102390,
+};
+
+/*
+ * Values for audio compression release time
+ * device release
+ * value time (us)
+ */
+static unsigned long const acomp_rtimes[] = {
+ 0, 100000,
+ 1, 200000,
+ 2, 350000,
+ 3, 525000,
+ 4, 1000000,
+};
+
+static int usecs_to_dev(unsigned long usecs, unsigned long const array[],
+ int size)
+{
+ int i;
+ int rval = -EINVAL;
+
+ for (i = 0; i < size / 2; i++)
+ if (array[(i * 2) + 1] >= usecs) {
+ rval = array[i * 2];
+ break;
+ }
+
+ return rval;
+}
+
+static unsigned long dev_to_usecs(int value, unsigned long const array[],
+ int size)
+{
+ int i;
+ int rval = -EINVAL;
+
+ for (i = 0; i < size / 2; i++)
+ if (array[i * 2] == value) {
+ rval = array[(i * 2) + 1];
+ break;
+ }
+
+ return rval;
+}
+
+/*
+ * si4713_send_command - sends a command to si4713 and waits its response
+ * @sdev: si4713_device structure for the device we are communicating
+ * @command: command id
+ * @args: command arguments we are sending (up to 7)
+ * @argn: actual size of @args
+ * @response: buffer to place the expected response from the device (up to 15)
+ * @respn: actual size of @response
+ * @usecs: amount of time to wait before reading the response (in usecs)
+ */
+static int si4713_send_command(struct si4713_device *sdev, const u8 command,
+ const u8 args[], const int argn,
+ u8 response[], const int respn, const int usecs)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ u8 data1[MAX_ARGS + 1];
+ int err;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ /* First send the command and its arguments */
+ data1[0] = command;
+ memcpy(data1 + 1, args, argn);
+ DBG_BUFFER(&client->dev, "Parameters", data1, argn + 1);
+
+ err = i2c_master_send(client, data1, argn + 1);
+ if (err != argn + 1) {
+ dev_err(&client->dev, "Error while sending command 0x%02x\n",
+ command);
+ return (err > 0) ? -EIO : err;
+ }
+
+ /* Wait response from interrupt */
+ if (!wait_for_completion_timeout(&sdev->work,
+ usecs_to_jiffies(usecs) + 1))
+ dev_dbg(&client->dev, "Device took too much time.\n");
+
+ /* Then get the response */
+ err = i2c_master_recv(client, response, respn);
+ if (err != respn) {
+ dev_err(&client->dev,
+ "Error while reading response for command 0x%02x\n",
+ command);
+ return (err > 0) ? -EIO : err;
+ }
+
+ DBG_BUFFER(&client->dev, "Response", response, respn);
+ if (check_command_failed(response[0]))
+ return -EBUSY;
+
+ return 0;
+}
+
+/*
+ * si4713_read_property - reads a si4713 property
+ * @sdev: si4713_device structure for the device we are communicating
+ * @prop: property identification number
+ */
+static int si4713_read_property(struct si4713_device *sdev, u16 prop)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int err;
+ u8 val[SI4713_GET_PROP_NRESP];
+ /*
+ * REVISIT: From Programming Manual
+ * .First byte = 0
+ * .Second byte = property's MSB
+ * .Third byte = property's LSB
+ */
+ const u8 args[SI4713_GET_PROP_NARGS] = {
+ 0x00,
+ msb(prop),
+ lsb(prop),
+ };
+
+ err = si4713_send_command(sdev, SI4713_CMD_GET_PROPERTY,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ return err;
+
+ dev_dbg(&client->dev, "Status from read prop: 0x%02x\n", val[0]);
+
+ return compose_u16(val[2], val[3]);
+}
+
+/*
+ * si4713_write_property - modifies a si4713 property
+ * @sdev: si4713_device structure for the device we are communicating
+ * @prop: property identification number
+ * @val: new value for that property
+ */
+static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int rval;
+ u8 resp[SI4713_SET_PROP_NRESP];
+ /*
+ * REVISIT: From Programming Manual
+ * .First byte = 0
+ * .Second byte = property's MSB
+ * .Third byte = property's LSB
+ * .Fourth byte = value's MSB
+ * .Fifth byte = value's LSB
+ */
+ const u8 args[SI4713_SET_PROP_NARGS] = {
+ 0x00,
+ msb(prop),
+ lsb(prop),
+ msb(val),
+ lsb(val),
+ };
+
+ rval = si4713_send_command(sdev, SI4713_CMD_SET_PROPERTY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ DEFAULT_TIMEOUT);
+
+ if (rval < 0)
+ return rval;
+
+ dev_dbg(&client->dev, "Status from write prop: 0x%02x\n",
+ resp[0]);
+
+ /*
+ * As there is no command response for SET_PROPERTY,
+ * wait Tcomp time to finish before proceed, in order
+ * to have property properly set.
+ */
+ msleep(TIMEOUT_SET_PROPERTY);
+
+ return rval;
+}
+
+/*
+ * si4713_powerup - Powers the device up
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_powerup(struct si4713_device *sdev)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int err;
+ u8 resp[SI4713_PWUP_NRESP];
+ /*
+ * REVISIT: From Programming Manual
+ * .First byte = Enabled interrupts and boot function
+ * .Second byte = Input operation mode
+ */
+ const u8 args[SI4713_PWUP_NARGS] = {
+ SI4713_PWUP_CTSIEN | SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX,
+ SI4713_PWUP_OPMOD_ANALOG,
+ };
+
+ if (sdev->power_state)
+ return 0;
+
+ sdev->platform_data->set_power(1);
+ err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ TIMEOUT_POWER_UP);
+
+ if (!err) {
+ dev_dbg(&client->dev, "Powerup response: 0x%02x\n",
+ resp[0]);
+ dev_dbg(&client->dev, "Device in power up mode\n");
+ sdev->power_state = POWER_ON;
+
+ err = si4713_write_property(sdev, SI4713_GPO_IEN,
+ SI4713_STC_INT | SI4713_CTS);
+ } else {
+ sdev->platform_data->set_power(0);
+ }
+
+ return err;
+}
+
+/*
+ * si4713_powerdown - Powers the device down
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_powerdown(struct si4713_device *sdev)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int err;
+ u8 resp[SI4713_PWDN_NRESP];
+
+ if (!sdev->power_state)
+ return 0;
+
+ err = si4713_send_command(sdev, SI4713_CMD_POWER_DOWN,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ DEFAULT_TIMEOUT);
+
+ if (!err) {
+ dev_dbg(&client->dev, "Power down response: 0x%02x\n",
+ resp[0]);
+ dev_dbg(&client->dev, "Device in reset mode\n");
+ sdev->platform_data->set_power(0);
+ sdev->power_state = POWER_OFF;
+ }
+
+ return err;
+}
+
+/*
+ * si4713_checkrev - Checks if we are treating a device with the correct rev.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+#define pr_revision(devicep, buffer) \
+ dev_info(devicep, "Detected %s (0x%02x) Firmware: %d.%d" \
+ " Patch ID: %02x:%02x Component: %d.%d" \
+ " Chip Rev.: %s\n", \
+ buffer[1] == SI4713_PRODUCT_NUMBER ? "Si4713" : "",\
+ buffer[1], \
+ buffer[2] & 0xF, buffer[3] & 0xF, \
+ buffer[4], buffer[5], \
+ buffer[6] & 0xF, buffer[7] & 0xF, \
+ buffer[8] == 0x41 ? "revA" : "unknown")
+static int si4713_checkrev(struct si4713_device *sdev)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int rval;
+ u8 resp[SI4713_GETREV_NRESP];
+
+ mutex_lock(&sdev->mutex);
+
+ rval = si4713_send_command(sdev, SI4713_CMD_GET_REV,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ DEFAULT_TIMEOUT);
+
+ if (rval < 0)
+ goto unlock;
+
+ if (resp[1] == SI4713_PRODUCT_NUMBER) {
+ pr_revision(&client->dev, resp);
+ } else {
+ dev_err(&client->dev, "Invalid product number\n");
+ rval = -EINVAL;
+ }
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+/*
+ * si4713_wait_stc - Waits STC interrupt and clears status bits. Usefull
+ * for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS
+ * @sdev: si4713_device structure for the device we are communicating
+ * @usecs: timeout to wait for STC interrupt signal
+ */
+static int si4713_wait_stc(struct si4713_device *sdev, const int usecs)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int err;
+ u8 resp[SI4713_GET_STATUS_NRESP];
+
+ /* Wait response from STC interrupt */
+ if (!wait_for_completion_timeout(&sdev->work,
+ usecs_to_jiffies(TIMEOUT_TX_TUNE) + 1))
+ dev_dbg(&client->dev, "Device took too much time.\n");
+
+ /* Clear status bits */
+ err = si4713_send_command(sdev, SI4713_CMD_GET_INT_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ goto exit;
+
+ dev_dbg(&client->dev, "Status bits: 0x%02x\n", resp[0]);
+
+ if (!(resp[0] & SI4713_STC_INT))
+ err = -EIO;
+
+exit:
+ return err;
+}
+
+/*
+ * si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning
+ * frequency between 76 and 108 MHz in 10 kHz units and
+ * steps of 50 kHz.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
+ */
+static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int err;
+ u8 val[SI4713_TXFREQ_NRESP];
+ /*
+ * REVISIT: From Programming Manual
+ * .First byte = 0
+ * .Second byte = frequency's MSB
+ * .Third byte = frequency's LSB
+ */
+ const u8 args[SI4713_TXFREQ_NARGS] = {
+ 0x00,
+ msb(frequency),
+ lsb(frequency),
+ };
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_FREQ,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ return err;
+
+ dev_dbg(&client->dev, "Status from tx tune freq: 0x%02x\n",
+ val[0]);
+
+ err = si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
+ if (err < 0)
+ return err;
+
+ return compose_u16(args[1], args[2]);
+}
+
+/*
+ * si4713_tx_tune_power - Sets the RF voltage level between 88 and 115 dBuV in
+ * 1 dB units. A value of 0x00 indicates off. The command
+ * also sets the antenna tuning capacitance. A value of 0
+ * indicates autotuning, and a value of 1 - 191 indicates
+ * a manual override, which results in a tuning
+ * capacitance of 0.25 pF x @antcap.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @power: tuning power (88 - 115 dBuV, unit/step 1 dB)
+ * @antcap: value of antenna tuning capacitor (0 - 191)
+ */
+static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
+ u8 antcap)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int err;
+ u8 val[SI4713_TXPWR_NRESP];
+ /*
+ * REVISIT: From Programming Manual
+ * .First byte = 0
+ * .Second byte = 0
+ * .Third byte = power
+ * .Fourth byte = antcap
+ */
+ const u8 args[SI4713_TXPWR_NARGS] = {
+ 0x00,
+ 0x00,
+ power,
+ antcap,
+ };
+
+ if (((power > 0) && (power < SI4713_MIN_POWER)) ||
+ power > SI4713_MAX_POWER || antcap > SI4713_MAX_ANTCAP)
+ return -EDOM;
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_POWER,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ return err;
+
+ dev_dbg(&client->dev, "Status from tx tune power: 0x%02x\n",
+ val[0]);
+
+ return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE_POWER);
+}
+
+/*
+ * si4713_tx_tune_measure - Enters receive mode and measures the received noise
+ * level in units of dBuV on the selected frequency.
+ * The Frequency must be between 76 and 108 MHz in 10 kHz
+ * units and steps of 50 kHz. The command also sets the
+ * antenna tuning capacitance. A value of 0 means
+ * autotuning, and a value of 1 to 191 indicates manual
+ * override.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
+ * @antcap: value of antenna tuning capacitor (0 - 191)
+ */
+static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency,
+ u8 antcap)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int err;
+ u8 val[SI4713_TXMEA_NRESP];
+ /*
+ * REVISIT: From Programming Manual
+ * .First byte = 0
+ * .Second byte = frequency's MSB
+ * .Third byte = frequency's LSB
+ * .Fourth byte = antcap
+ */
+ const u8 args[SI4713_TXMEA_NARGS] = {
+ 0x00,
+ msb(frequency),
+ lsb(frequency),
+ antcap,
+ };
+
+ sdev->tune_rssi = DEFAULT_TUNE_RSSI;
+
+ if (antcap > SI4713_MAX_ANTCAP)
+ return -EDOM;
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_MEASURE,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ return err;
+
+ dev_dbg(&client->dev, "Status from tx tune measure: 0x%02x\n",
+ val[0]);
+
+ return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
+}
+
+/*
+ * si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or
+ * tx_tune_power commands. This command return the current
+ * frequency, output voltage in dBuV, the antenna tunning
+ * capacitance value and the received noise level. The
+ * command also clears the stcint interrupt bit when the
+ * first bit of its arguments is high.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @intack: 0x01 to clear the seek/tune complete interrupt status indicator.
+ * @frequency: returned frequency
+ * @power: returned power
+ * @antcap: returned antenna capacitance
+ * @noise: returned noise level
+ */
+static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack,
+ u16 *frequency, u8 *power,
+ u8 *antcap, u8 *noise)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int err;
+ u8 val[SI4713_TXSTATUS_NRESP];
+ /*
+ * REVISIT: From Programming Manual
+ * .First byte = intack bit
+ */
+ const u8 args[SI4713_TXSTATUS_NARGS] = {
+ intack & SI4713_INTACK_MASK,
+ };
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_STATUS,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (!err) {
+ dev_dbg(&client->dev,
+ "Status from tx tune status: 0x%02x\n", val[0]);
+ *frequency = compose_u16(val[2], val[3]);
+ sdev->frequency = *frequency;
+ *power = val[5];
+ *antcap = val[6];
+ *noise = val[7];
+ dev_dbg(&client->dev, "Tune status: %d x 10 kHz "
+ "(power %d, antcap %d, rnl %d)\n",
+ *frequency, *power, *antcap, *noise);
+ }
+
+ return err;
+}
+
+/*
+ * si4713_tx_rds_buff - Loads the RDS group buffer FIFO or circular buffer.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @mode: the buffer operation mode.
+ * @rdsb: RDS Block B
+ * @rdsc: RDS Block C
+ * @rdsd: RDS Block D
+ * @intstatus: returns current interrupt status
+ * @cbavail: returns the number of available circular buffer blocks.
+ * @cbused: returns the number of used circular buffer blocks.
+ * @fifoavail: returns the number of available fifo buffer blocks.
+ * @fifoused: returns the number of used fifo buffer blocks.
+ */
+static int si4713_tx_rds_buff(struct si4713_device *sdev, u8 mode, u16 rdsb,
+ u16 rdsc, u16 rdsd, u8 *intstatus, u8 *cbavail,
+ u8 *cbused, u8 *fifoavail, u8 *fifoused)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int err;
+ u8 val[SI4713_RDSBUFF_NRESP];
+
+ const u8 args[SI4713_RDSBUFF_NARGS] = {
+ mode & SI4713_RDSBUFF_MODE_MASK,
+ msb(rdsb),
+ lsb(rdsb),
+ msb(rdsc),
+ lsb(rdsc),
+ msb(rdsd),
+ lsb(rdsd),
+ };
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_BUFF,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (!err) {
+ dev_dbg(&client->dev,
+ "Status from tx rds buff: 0x%02x\n", val[0]);
+ *intstatus = val[1];
+ *cbavail = val[2];
+ *cbused = val[3];
+ *fifoavail = val[4];
+ *fifoused = val[5];
+ dev_dbg(&client->dev, "rds buffer status: interrupts"
+ " 0x%02x cb avail: %d cb used %d fifo avail"
+ " %d fifo used %d\n", *intstatus, *cbavail,
+ *cbused, *fifoavail, *fifoused);
+ }
+
+ return err;
+}
+
+/*
+ * si4713_tx_rds_ps - Loads the program service buffer.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @psid: program service id to be loaded.
+ * @pschar: assumed 4 size char array to be loaded into the program service
+ */
+static int si4713_tx_rds_ps(struct si4713_device *sdev, u8 psid,
+ unsigned char *pschar)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int err;
+ u8 val[SI4713_RDSPS_NRESP];
+
+ const u8 args[SI4713_RDSPS_NARGS] = {
+ psid & SI4713_RDSPS_PSID_MASK,
+ pschar[0],
+ pschar[1],
+ pschar[2],
+ pschar[3],
+ };
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_PS,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ return err;
+
+ dev_dbg(&client->dev, "Status from tx rds ps: 0x%02x\n",
+ val[0]);
+
+ return err;
+}
+
+/*
+ * si4713_init - Sets the device up with default configuration.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+int si4713_init(struct si4713_device *sdev)
+{
+ int rval;
+
+ rval = si4713_set_rds_pi(sdev, DEFAULT_RDS_PI);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_rds_pty(sdev, DEFAULT_RDS_PTY);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_rds_ps_name(sdev, DEFAULT_RDS_PS_NAME);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_rds_radio_text(sdev, DEFAULT_RDS_RADIO_TEXT);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_rds_enabled(sdev, 1);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_limiter_release_time(sdev, DEFAULT_LIMITER_RTIME);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_limiter_deviation(sdev, DEFAULT_LIMITER_DEV);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_limiter_enabled(sdev, 1);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_pilot_frequency(sdev, DEFAULT_PILOT_FREQUENCY);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_pilot_deviation(sdev, DEFAULT_PILOT_DEVIATION);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_pilot_enabled(sdev, 1);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_stereo_enabled(sdev, 1);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_acomp_attack_time(sdev, DEFAULT_ACOMP_ATIME);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_acomp_release_time(sdev, DEFAULT_ACOMP_RTIME);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_acomp_gain(sdev, DEFAULT_ACOMP_GAIN);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_acomp_threshold(sdev, DEFAULT_ACOMP_THRESHOLD);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_acomp_enabled(sdev, 1);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_mute(sdev, DEFAULT_MUTE);
+ if (rval < 0)
+ goto exit;
+
+exit:
+ return rval;
+}
+
+/*
+ * si4713_setup - Sets the device up with current configuration.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+int si4713_setup(struct si4713_device *sdev)
+{
+ struct si4713_device *tmp;
+ int rval;
+
+ tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ /* Get a local copy to avoid race */
+ mutex_lock(&sdev->mutex);
+ memcpy(tmp, sdev, sizeof(*sdev));
+ mutex_unlock(&sdev->mutex);
+
+ rval = si4713_set_rds_pi(sdev, tmp->rds_info.pi);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_rds_pty(sdev, tmp->rds_info.pty);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_rds_ps_name(sdev, tmp->rds_info.ps_name);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_rds_radio_text(sdev, tmp->rds_info.radio_text);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_rds_enabled(sdev, tmp->rds_info.enabled);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_limiter_release_time(sdev,
+ tmp->limiter_info.release_time);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_limiter_deviation(sdev, tmp->limiter_info.deviation);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_limiter_enabled(sdev, tmp->limiter_info.enabled);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_pilot_frequency(sdev, tmp->pilot_info.frequency);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_pilot_deviation(sdev, tmp->pilot_info.deviation);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_pilot_enabled(sdev, tmp->pilot_info.enabled);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_stereo_enabled(sdev, tmp->stereo);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_acomp_attack_time(sdev, tmp->acomp_info.attack_time);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_acomp_release_time(sdev,
+ tmp->acomp_info.release_time);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_acomp_gain(sdev, tmp->acomp_info.gain);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_acomp_threshold(sdev, tmp->acomp_info.threshold);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_acomp_enabled(sdev, tmp->acomp_info.enabled);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_mute(sdev, tmp->mute);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_frequency(sdev, tmp->frequency ? tmp->frequency :
+ DEFAULT_FREQUENCY);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_power_level(sdev, tmp->power_level ?
+ tmp->power_level :
+ DEFAULT_POWER_LEVEL);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_antenna_capacitor(sdev, tmp->antenna_capacitor);
+
+exit:
+ kfree(tmp);
+ return rval;
+}
+
+int si4713_set_power_level(struct si4713_device *sdev, u8 power_level)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_tx_tune_power(sdev, power_level,
+ sdev->antenna_capacitor);
+
+ if (rval < 0)
+ goto unlock;
+ }
+
+ sdev->power_level = power_level;
+ rval = 0;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_get_power_level(struct si4713_device *sdev)
+{
+ int rval;
+ u16 f = 0;
+ u8 p, a, n;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_tx_tune_status(sdev, 0x00, &f, &p, &a, &n);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->power_level = p;
+ }
+
+ rval = sdev->power_level;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_antenna_capacitor(struct si4713_device *sdev, u8 value)
+{
+ int rval = 0;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_tx_tune_power(sdev, sdev->power_level, value);
+
+ if (!rval)
+ sdev->antenna_capacitor = value;
+
+ mutex_unlock(&sdev->mutex);
+
+ return rval;
+}
+
+int si4713_get_antenna_capacitor(struct si4713_device *sdev)
+{
+ int rval = -EINVAL;
+ u16 f = 0;
+ u8 p, a, n;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_tx_tune_status(sdev, 0x00, &f, &p, &a, &n);
+
+ if (rval < 0)
+ goto unlock;
+
+ rval = a;
+ }
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_power_state(struct si4713_device *sdev, u8 value)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (value)
+ rval = si4713_powerup(sdev);
+ else
+ rval = si4713_powerdown(sdev);
+
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_probe(struct si4713_device *sdev)
+{
+ int rval;
+
+ rval = si4713_set_power_state(sdev, POWER_ON);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_checkrev(sdev);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_init(sdev);
+ if (rval < 0)
+ goto exit;
+
+ rval = si4713_set_power_state(sdev, POWER_OFF);
+
+exit:
+ return rval;
+}
+
+int si4713_set_frequency(struct si4713_device *sdev, u16 frequency)
+{
+ int rval = 0;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_tx_tune_freq(sdev, frequency);
+ if (rval < 0)
+ goto unlock;
+ sdev->frequency = rval;
+ } else {
+ rval = -ENODEV;
+ }
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_get_frequency(struct si4713_device *sdev)
+{
+ int rval;
+ u16 f = 0;
+ u8 p, a, n;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_tx_tune_status(sdev, 0x00, &f, &p, &a, &n);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->frequency = f;
+ }
+
+ rval = sdev->frequency;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_mute(struct si4713_device *sdev, u16 mute)
+{
+ int rval = 0;
+
+ mute = set_mute(mute);
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev,
+ SI4713_TX_LINE_INPUT_MUTE, mute);
+
+ if (rval >= 0)
+ sdev->mute = get_mute(mute);
+
+ mutex_unlock(&sdev->mutex);
+
+ return rval;
+}
+
+int si4713_get_mute(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_LINE_INPUT_MUTE);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->mute = rval;
+ }
+
+ rval = get_mute(sdev->mute);
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_rds_pi(struct si4713_device *sdev, u16 pi)
+{
+ int rval = 0;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev, SI4713_TX_RDS_PI, pi);
+
+ if (rval >= 0)
+ sdev->rds_info.pi = pi;
+
+ mutex_unlock(&sdev->mutex);
+
+ return rval;
+}
+
+int si4713_get_rds_pi(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_RDS_PI);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->rds_info.pi = rval;
+ }
+
+ rval = sdev->rds_info.pi;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_rds_pty(struct si4713_device *sdev, u8 pty)
+{
+ int rval = 0;
+ u16 p;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_RDS_PS_MISC);
+ if (rval < 0)
+ goto unlock;
+
+ p = set_pty(rval, pty);
+
+ rval = si4713_write_property(sdev, SI4713_TX_RDS_PS_MISC, p);
+ if (rval < 0)
+ goto unlock;
+ }
+
+ sdev->rds_info.pty = pty;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_get_rds_pty(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_RDS_PS_MISC);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->rds_info.pty = get_pty(rval);
+ }
+
+ rval = sdev->rds_info.pty;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_rds_ps_name(struct si4713_device *sdev, char *ps_name)
+{
+ int rval = 0, i;
+ u8 len = 0;
+ u8 *tmp;
+
+ if (!strlen(ps_name))
+ return -EINVAL;
+
+ tmp = kzalloc(MAX_RDS_PS_NAME + 1, GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ strncpy(tmp, ps_name, MAX_RDS_PS_NAME);
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ /* Write the new ps name and clear the padding */
+ for (i = 0; i < MAX_RDS_PS_NAME; i += (RDS_BLOCK / 2)) {
+ rval = si4713_tx_rds_ps(sdev, (i / (RDS_BLOCK / 2)),
+ tmp + i);
+ if (rval < 0)
+ goto unlock;
+ }
+
+ /* Setup the size to be sent */
+ len = strlen(tmp) - 1;
+
+ rval = si4713_write_property(sdev,
+ SI4713_TX_RDS_PS_MESSAGE_COUNT,
+ rds_ps_nblocks(len));
+ if (rval < 0)
+ goto unlock;
+
+ rval = si4713_write_property(sdev,
+ SI4713_TX_RDS_PS_REPEAT_COUNT,
+ DEFAULT_RDS_PS_REPEAT_COUNT * 2);
+ if (rval < 0)
+ goto unlock;
+ }
+
+ strncpy(sdev->rds_info.ps_name, tmp, MAX_RDS_PS_NAME);
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ kfree(tmp);
+ return rval;
+}
+
+int si4713_get_rds_ps_name(struct si4713_device *sdev, char *ps_name)
+{
+ mutex_lock(&sdev->mutex);
+ strncpy(ps_name, sdev->rds_info.ps_name, MAX_RDS_PS_NAME);
+ mutex_unlock(&sdev->mutex);
+
+ return 0;
+}
+
+int si4713_set_rds_radio_text(struct si4713_device *sdev, char *radio_text)
+{
+ int rval = 0, i;
+ u16 t_index = 0;
+ u8 s, a, u, fa, fu, b_index = 0, cr_inserted = 0;
+ u8 *tmp;
+
+ if (!strlen(radio_text))
+ return -EINVAL;
+
+ tmp = kzalloc(MAX_RDS_RADIO_TEXT + 1, GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ strncpy(tmp, radio_text, MAX_RDS_RADIO_TEXT);
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_CLEAR, 0, 0, 0,
+ &s, &a, &u, &fa, &fu);
+ if (rval < 0)
+ goto unlock;
+ do {
+ /* RDS spec says that if the last block isn't used,
+ * then apply a carriage return
+ */
+ if (t_index < (RDS_RADIOTEXT_INDEX_MAX * \
+ RDS_RADIOTEXT_BLK_SIZE)) {
+ for (i = 0; i < RDS_RADIOTEXT_BLK_SIZE; i++) {
+ if (!tmp[t_index + i] ||
+ tmp[t_index + i] == \
+ RDS_CARRIAGE_RETURN) {
+ tmp[t_index + i] =
+ RDS_CARRIAGE_RETURN;
+ cr_inserted = 1;
+ break;
+ }
+ }
+ }
+
+ rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_LOAD,
+ compose_u16(RDS_RADIOTEXT_2A,
+ b_index++),
+ compose_u16(tmp[t_index],
+ tmp[t_index + 1]),
+ compose_u16(tmp[t_index + 2],
+ tmp[t_index + 3]),
+ &s, &a, &u, &fa, &fu);
+ if (rval < 0)
+ goto unlock;
+
+ t_index += RDS_RADIOTEXT_BLK_SIZE;
+
+ if (cr_inserted)
+ break;
+ } while (u < a);
+ }
+
+ strncpy(sdev->rds_info.radio_text, tmp, MAX_RDS_RADIO_TEXT);
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ kfree(tmp);
+ return rval;
+}
+
+int si4713_get_rds_radio_text(struct si4713_device *sdev, char *radio_text)
+{
+ mutex_lock(&sdev->mutex);
+ strncpy(radio_text, sdev->rds_info.radio_text, MAX_RDS_RADIO_TEXT);
+ mutex_unlock(&sdev->mutex);
+
+ return 0;
+}
+
+int si4713_set_rds_enabled(struct si4713_device *sdev, u8 enabled)
+{
+ int rval = 0;
+ u16 p;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE);
+ if (rval < 0)
+ goto unlock;
+
+ p = rval;
+ if (enabled)
+ p = enable_rds(p);
+ else
+ p = disable_rds(p);
+
+ rval = si4713_write_property(sdev, SI4713_TX_COMPONENT_ENABLE,
+ p);
+ if (rval < 0)
+ goto unlock;
+
+ if (enabled) {
+ rval = si4713_write_property(sdev,
+ SI4713_TX_RDS_DEVIATION,
+ DEFAULT_RDS_DEVIATION);
+ if (rval < 0)
+ goto unlock;
+ }
+ }
+
+ sdev->rds_info.enabled = enabled & 0x01;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_get_rds_enabled(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE);
+ if (rval < 0)
+ goto unlock;
+
+ sdev->rds_info.enabled = get_rds_status(rval);
+ }
+
+ rval = sdev->rds_info.enabled;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_preemphasis(struct si4713_device *sdev, u8 preemphasis)
+{
+ int rval = 0;
+
+ switch (preemphasis) {
+ case PREEMPHASIS_USA:
+ preemphasis = FMPE_USA;
+ break;
+ case PREEMPHASIS_EU:
+ preemphasis = FMPE_EU;
+ break;
+ case PREEMPHASIS_DISABLED:
+ preemphasis = FMPE_DISABLED;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev, SI4713_TX_PREEMPHASIS,
+ preemphasis);
+
+ if (rval >= 0)
+ sdev->preemphasis = preemphasis;
+
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_get_preemphasis(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_PREEMPHASIS);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->preemphasis = rval;
+ }
+
+ switch (sdev->preemphasis) {
+ case FMPE_USA:
+ rval = PREEMPHASIS_USA;
+ break;
+ case FMPE_EU:
+ rval = PREEMPHASIS_EU;
+ break;
+ case FMPE_DISABLED:
+ rval = PREEMPHASIS_DISABLED;
+ break;
+ default:
+ rval = -EINVAL;
+ goto unlock;
+ }
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_limiter_enabled(struct si4713_device *sdev, u8 enabled)
+{
+ int rval = 0;
+ u16 p;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_ACOMP_ENABLE);
+ if (rval < 0)
+ goto unlock;
+
+ p = rval;
+ if (enabled)
+ p = enable_limiter(p);
+ else
+ p = disable_limiter(p);
+
+ rval = si4713_write_property(sdev, SI4713_TX_ACOMP_ENABLE,
+ p);
+
+ if (rval < 0)
+ goto unlock;
+ }
+
+ sdev->limiter_info.enabled = enabled & 0x01;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_get_limiter_enabled(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_ACOMP_ENABLE);
+ if (rval < 0)
+ goto unlock;
+
+ sdev->limiter_info.enabled = get_limiter_status(rval);
+ }
+
+ rval = sdev->limiter_info.enabled;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_limiter_deviation(struct si4713_device *sdev,
+ unsigned long deviation)
+{
+ int rval = 0;
+
+ /* Device receives in 10Hz units */
+ deviation /= 10;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev, SI4713_TX_AUDIO_DEVIATION,
+ deviation);
+
+ /* Device returns in 10Hz units */
+ if (rval >= 0)
+ sdev->limiter_info.deviation = deviation * 10;
+
+ mutex_unlock(&sdev->mutex);
+
+ return rval;
+}
+
+long si4713_get_limiter_deviation(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_AUDIO_DEVIATION);
+
+ if (rval < 0)
+ goto unlock;
+
+ /* Device returns in 10Hz units */
+ sdev->limiter_info.deviation = rval * 10;
+ }
+
+ rval = sdev->limiter_info.deviation;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_limiter_release_time(struct si4713_device *sdev,
+ unsigned long rtime)
+{
+ int rval;
+
+ rval = usecs_to_dev(rtime, limiter_times, ARRAY_SIZE(limiter_times));
+ if (rval < 0)
+ goto exit;
+
+ rtime = rval;
+ rval = 0;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev,
+ SI4713_TX_LIMITER_RELEASE_TIME, rtime);
+
+ if (rval >= 0)
+ sdev->limiter_info.release_time = dev_to_usecs(rtime,
+ limiter_times,
+ ARRAY_SIZE(limiter_times));
+
+ mutex_unlock(&sdev->mutex);
+
+exit:
+ return rval;
+}
+
+long si4713_get_limiter_release_time(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev,
+ SI4713_TX_LIMITER_RELEASE_TIME);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->limiter_info.release_time = dev_to_usecs(rval,
+ limiter_times,
+ ARRAY_SIZE(limiter_times));
+ }
+
+ rval = sdev->limiter_info.release_time;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_stereo_enabled(struct si4713_device *sdev, u8 enabled)
+{
+ int rval = 0;
+ u16 p;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE);
+ if (rval < 0)
+ goto unlock;
+
+ p = rval;
+ if (enabled)
+ p = enable_stereo(p);
+ else
+ p = disable_stereo(p);
+
+ rval = si4713_write_property(sdev, SI4713_TX_COMPONENT_ENABLE,
+ p);
+
+ if (rval < 0)
+ goto unlock;
+ }
+
+ sdev->stereo = enabled & 0x01;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_get_stereo_enabled(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE);
+ if (rval < 0)
+ goto unlock;
+
+ sdev->stereo = get_stereo_status(rval);
+ }
+
+ rval = sdev->stereo;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_pilot_enabled(struct si4713_device *sdev, u8 enabled)
+{
+ int rval = 0;
+ u16 p;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE);
+ if (rval < 0)
+ goto unlock;
+
+ p = rval;
+ if (enabled)
+ p = enable_pilot(p);
+ else
+ p = disable_pilot(p);
+
+ rval = si4713_write_property(sdev, SI4713_TX_COMPONENT_ENABLE,
+ p);
+
+ if (rval < 0)
+ goto unlock;
+ }
+
+ sdev->pilot_info.enabled = enabled & 0x01;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_get_pilot_enabled(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE);
+ if (rval < 0)
+ goto unlock;
+
+ sdev->pilot_info.enabled = get_pilot_status(rval);
+ }
+
+ rval = sdev->pilot_info.enabled;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_pilot_deviation(struct si4713_device *sdev,
+ unsigned long deviation)
+{
+ int rval = 0;
+
+ /* Device receives in 10Hz units */
+ deviation /= 10;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev, SI4713_TX_PILOT_DEVIATION,
+ deviation);
+
+ /* Device returns in 10Hz units */
+ if (rval >= 0)
+ sdev->pilot_info.deviation = deviation * 10;
+
+ mutex_unlock(&sdev->mutex);
+
+ return rval;
+}
+
+long si4713_get_pilot_deviation(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_PILOT_DEVIATION);
+
+ if (rval < 0)
+ goto unlock;
+
+ /* Device returns in 10Hz units */
+ sdev->pilot_info.deviation = rval * 10;
+ }
+
+ rval = sdev->pilot_info.deviation;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_pilot_frequency(struct si4713_device *sdev, u16 freq)
+{
+ int rval = 0;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev, SI4713_TX_PILOT_FREQUENCY,
+ freq);
+
+ if (rval >= 0)
+ sdev->pilot_info.frequency = freq;
+
+ mutex_unlock(&sdev->mutex);
+
+ return rval;
+}
+
+int si4713_get_pilot_frequency(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_PILOT_FREQUENCY);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->pilot_info.frequency = rval;
+ }
+
+ rval = sdev->pilot_info.frequency;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_acomp_enabled(struct si4713_device *sdev, u8 enabled)
+{
+ int rval = 0;
+ u16 p;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_ACOMP_ENABLE);
+ if (rval < 0)
+ goto unlock;
+
+ p = rval;
+ if (enabled)
+ p = enable_acomp(p);
+ else
+ p = disable_acomp(p);
+
+ rval = si4713_write_property(sdev, SI4713_TX_ACOMP_ENABLE, p);
+
+ if (rval < 0)
+ goto unlock;
+ }
+
+ sdev->acomp_info.enabled = enabled & 0x01;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_get_acomp_enabled(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_ACOMP_ENABLE);
+ if (rval < 0)
+ goto unlock;
+
+ sdev->acomp_info.enabled = get_acomp_status(rval);
+ }
+
+ rval = sdev->acomp_info.enabled;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_acomp_gain(struct si4713_device *sdev, u8 gain)
+{
+ int rval = 0;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev, SI4713_TX_ACOMP_GAIN, gain);
+
+ if (rval >= 0)
+ sdev->acomp_info.gain = gain;
+
+ mutex_unlock(&sdev->mutex);
+
+ return rval;
+}
+
+int si4713_get_acomp_gain(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_ACOMP_GAIN);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->acomp_info.gain = rval;
+ }
+
+ rval = sdev->acomp_info.gain;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_acomp_threshold(struct si4713_device *sdev, s8 threshold)
+{
+ int rval = 0;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev, SI4713_TX_ACOMP_THRESHOLD,
+ threshold);
+
+ if (rval >= 0)
+ sdev->acomp_info.threshold = threshold;
+
+ mutex_unlock(&sdev->mutex);
+
+ return rval;
+}
+
+int si4713_get_acomp_threshold(struct si4713_device *sdev, s8 *threshold)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev, SI4713_TX_ACOMP_THRESHOLD);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->acomp_info.threshold = rval;
+ }
+
+ *threshold = sdev->acomp_info.threshold;
+ rval = 0;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_acomp_release_time(struct si4713_device *sdev,
+ unsigned long rtime)
+{
+ int rval;
+
+ rval = usecs_to_dev(rtime, acomp_rtimes, ARRAY_SIZE(acomp_rtimes));
+ if (rval < 0)
+ goto exit;
+
+ rtime = rval;
+ rval = 0;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev,
+ SI4713_TX_ACOMP_RELEASE_TIME, rtime);
+
+ if (rval >= 0)
+ sdev->acomp_info.release_time = dev_to_usecs(rtime,
+ acomp_rtimes,
+ ARRAY_SIZE(acomp_rtimes));
+
+ mutex_unlock(&sdev->mutex);
+
+exit:
+ return rval;
+}
+
+long si4713_get_acomp_release_time(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev,
+ SI4713_TX_ACOMP_RELEASE_TIME);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->acomp_info.release_time = dev_to_usecs(rval,
+ acomp_rtimes,
+ ARRAY_SIZE(acomp_rtimes));
+ }
+
+ rval = sdev->acomp_info.release_time;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+
+int si4713_set_acomp_attack_time(struct si4713_device *sdev, u16 atime)
+{
+ int rval = 0;
+
+ /* Device receives in 0.5 ms units */
+ atime /= ATTACK_TIME_UNIT;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev,
+ SI4713_TX_ACOMP_ATTACK_TIME, atime);
+
+ if (rval >= 0)
+ sdev->acomp_info.attack_time = atime * ATTACK_TIME_UNIT;
+
+ mutex_unlock(&sdev->mutex);
+
+ return rval;
+}
+
+int si4713_get_acomp_attack_time(struct si4713_device *sdev)
+{
+ int rval;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev,
+ SI4713_TX_ACOMP_RELEASE_TIME);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->acomp_info.release_time = rval * ATTACK_TIME_UNIT;
+ }
+
+ rval = sdev->acomp_info.attack_time;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
+
+int si4713_set_tune_measure(struct si4713_device *sdev, u32 frequency)
+{
+ int rval = -ENODEV;
+
+ mutex_lock(&sdev->mutex);
+ if (sdev->power_state)
+ rval = si4713_tx_tune_measure(sdev, frequency / 10, 0);
+ mutex_unlock(&sdev->mutex);
+
+ return rval;
+}
+
+int si4713_get_tune_measure(struct si4713_device *sdev)
+{
+ int rval;
+ u16 f = 0;
+ u8 p, a, n;
+
+ mutex_lock(&sdev->mutex);
+
+ if (sdev->power_state) {
+ rval = si4713_tx_tune_status(sdev, 0x00, &f, &p, &a, &n);
+
+ if (rval < 0)
+ goto unlock;
+
+ sdev->tune_rssi = n;
+ }
+
+ rval = sdev->tune_rssi;
+
+unlock:
+ mutex_unlock(&sdev->mutex);
+ return rval;
+}
diff -r 85b64a6cc67c -r 94b5043b692a linux/drivers/media/linux/radio/si4713.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux/drivers/media/linux/radio/si4713.h Wed May 27 11:56:46 2009 +0300
@@ -0,0 +1,282 @@
+/*
+ * drivers/media/linux/radio/si4713.h
+ *
+ * Property and commands definitions for Si4713 radio transmitter chip.
+ *
+ * Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef SI4713_H
+#define SI4713_H
+
+#include <media/linux/v4l2-subdev.h>
+
+#include "radio-si4713.h"
+
+#define SI4713_PRODUCT_NUMBER 0x0D
+
+/* Command Timeouts */
+#define DEFAULT_TIMEOUT 500
+#define TIMEOUT_SET_PROPERTY 20
+#define TIMEOUT_TX_TUNE_POWER 30000
+#define TIMEOUT_TX_TUNE 110000
+#define TIMEOUT_POWER_UP 200000
+
+/*
+ * Command and its arguments definitions
+ */
+#define SI4713_PWUP_CTSIEN (1<<7)
+#define SI4713_PWUP_GPO2OEN (1<<6)
+#define SI4713_PWUP_PATCH (1<<5)
+#define SI4713_PWUP_XOSCEN (1<<4)
+#define SI4713_PWUP_FUNC_TX 0x02
+#define SI4713_PWUP_FUNC_PATCH 0x0F
+#define SI4713_PWUP_OPMOD_ANALOG 0x50
+#define SI4713_PWUP_OPMOD_DIGITAL 0x0F
+#define SI4713_PWUP_NARGS 2
+#define SI4713_PWUP_NRESP 1
+#define SI4713_CMD_POWER_UP 0x01
+
+#define SI4713_GETREV_NRESP 9
+#define SI4713_CMD_GET_REV 0x10
+
+#define SI4713_PWDN_NRESP 1
+#define SI4713_CMD_POWER_DOWN 0x11
+
+#define SI4713_SET_PROP_NARGS 5
+#define SI4713_SET_PROP_NRESP 1
+#define SI4713_CMD_SET_PROPERTY 0x12
+
+#define SI4713_GET_PROP_NARGS 3
+#define SI4713_GET_PROP_NRESP 4
+#define SI4713_CMD_GET_PROPERTY 0x13
+
+#define SI4713_GET_STATUS_NRESP 1
+#define SI4713_CMD_GET_INT_STATUS 0x14
+
+#define SI4713_CMD_PATCH_ARGS 0x15
+#define SI4713_CMD_PATCH_DATA 0x16
+
+#define SI4713_MAX_FREQ 10800
+#define SI4713_MIN_FREQ 7600
+#define SI4713_TXFREQ_NARGS 3
+#define SI4713_TXFREQ_NRESP 1
+#define SI4713_CMD_TX_TUNE_FREQ 0x30
+
+#define SI4713_MAX_POWER 120
+#define SI4713_MIN_POWER 88
+#define SI4713_MAX_ANTCAP 191
+#define SI4713_MIN_ANTCAP 0
+#define SI4713_TXPWR_NARGS 4
+#define SI4713_TXPWR_NRESP 1
+#define SI4713_CMD_TX_TUNE_POWER 0x31
+
+#define SI4713_TXMEA_NARGS 4
+#define SI4713_TXMEA_NRESP 1
+#define SI4713_CMD_TX_TUNE_MEASURE 0x32
+
+#define SI4713_INTACK_MASK 0x01
+#define SI4713_TXSTATUS_NARGS 1
+#define SI4713_TXSTATUS_NRESP 8
+#define SI4713_CMD_TX_TUNE_STATUS 0x33
+
+#define SI4713_OVERMOD_BIT (1 << 2)
+#define SI4713_IALH_BIT (1 << 1)
+#define SI4713_IALL_BIT (1 << 0)
+#define SI4713_ASQSTATUS_NARGS 1
+#define SI4713_ASQSTATUS_NRESP 5
+#define SI4713_CMD_TX_ASQ_STATUS 0x34
+
+#define SI4713_RDSBUFF_MODE_MASK 0x87
+#define SI4713_RDSBUFF_NARGS 7
+#define SI4713_RDSBUFF_NRESP 6
+#define SI4713_CMD_TX_RDS_BUFF 0x35
+
+#define SI4713_RDSPS_PSID_MASK 0x1F
+#define SI4713_RDSPS_NARGS 5
+#define SI4713_RDSPS_NRESP 1
+#define SI4713_CMD_TX_RDS_PS 0x36
+
+#define SI4713_CMD_GPO_CTL 0x80
+#define SI4713_CMD_GPO_SET 0x81
+
+/*
+ * Bits from status response
+ */
+#define SI4713_CTS (1<<7)
+#define SI4713_ERR (1<<6)
+#define SI4713_RDS_INT (1<<2)
+#define SI4713_ASQ_INT (1<<1)
+#define SI4713_STC_INT (1<<0)
+
+/*
+ * Property definitions
+ */
+#define SI4713_GPO_IEN 0x0001
+#define SI4713_DIG_INPUT_FORMAT 0x0101
+#define SI4713_DIG_INPUT_SAMPLE_RATE 0x0103
+#define SI4713_REFCLK_FREQ 0x0201
+#define SI4713_REFCLK_PRESCALE 0x0202
+#define SI4713_TX_COMPONENT_ENABLE 0x2100
+#define SI4713_TX_AUDIO_DEVIATION 0x2101
+#define SI4713_TX_PILOT_DEVIATION 0x2102
+#define SI4713_TX_RDS_DEVIATION 0x2103
+#define SI4713_TX_LINE_INPUT_LEVEL 0x2104
+#define SI4713_TX_LINE_INPUT_MUTE 0x2105
+#define SI4713_TX_PREEMPHASIS 0x2106
+#define SI4713_TX_PILOT_FREQUENCY 0x2107
+#define SI4713_TX_ACOMP_ENABLE 0x2200
+#define SI4713_TX_ACOMP_THRESHOLD 0x2201
+#define SI4713_TX_ACOMP_ATTACK_TIME 0x2202
+#define SI4713_TX_ACOMP_RELEASE_TIME 0x2203
+#define SI4713_TX_ACOMP_GAIN 0x2204
+#define SI4713_TX_LIMITER_RELEASE_TIME 0x2205
+#define SI4713_TX_ASQ_INTERRUPT_SOURCE 0x2300
+#define SI4713_TX_ASQ_LEVEL_LOW 0x2301
+#define SI4713_TX_ASQ_DURATION_LOW 0x2302
+#define SI4713_TX_ASQ_LEVEL_HIGH 0x2303
+#define SI4713_TX_ASQ_DURATION_HIGH 0x2304
+#define SI4713_TX_RDS_INTERRUPT_SOURCE 0x2C00
+#define SI4713_TX_RDS_PI 0x2C01
+#define SI4713_TX_RDS_PS_MIX 0x2C02
+#define SI4713_TX_RDS_PS_MISC 0x2C03
+#define SI4713_TX_RDS_PS_REPEAT_COUNT 0x2C04
+#define SI4713_TX_RDS_PS_MESSAGE_COUNT 0x2C05
+#define SI4713_TX_RDS_PS_AF 0x2C06
+#define SI4713_TX_RDS_FIFO_SIZE 0x2C07
+
+#define PREEMPHASIS_USA 75
+#define PREEMPHASIS_EU 50
+#define PREEMPHASIS_DISABLED 0
+#define FMPE_USA 0x00
+#define FMPE_EU 0x01
+#define FMPE_DISABLED 0x02
+
+#define POWER_UP 0x01
+#define POWER_DOWN 0x00
+
+struct rds_info {
+ u16 pi;
+#define MAX_RDS_PTY 31
+ u8 pty;
+#define MAX_RDS_PS_NAME 96
+ u8 ps_name[MAX_RDS_PS_NAME + 1];
+#define MAX_RDS_RADIO_TEXT 384
+ u8 radio_text[MAX_RDS_RADIO_TEXT + 1];
+ u8 enabled;
+};
+
+struct limiter_info {
+#define MAX_LIMITER_RELEASE_TIME 102390
+ unsigned long release_time;
+#define MAX_LIMITER_DEVIATION 90000
+ unsigned long deviation;
+ u8 enabled;
+};
+
+struct pilot_info {
+#define MAX_PILOT_DEVIATION 90000
+ unsigned long deviation;
+#define MAX_PILOT_FREQUENCY 19000
+ u16 frequency;
+ u8 enabled;
+};
+
+struct acomp_info {
+#define MAX_ACOMP_RELEASE_TIME 1000000
+ unsigned long release_time;
+#define MAX_ACOMP_ATTACK_TIME 5000
+ u16 attack_time;
+#define MAX_ACOMP_THRESHOLD 0
+#define MIN_ACOMP_THRESHOLD (-40)
+ s8 threshold;
+#define MAX_ACOMP_GAIN 20
+ u8 gain;
+ u8 enabled;
+};
+
+/*
+ * si4713_device - private data
+ */
+struct si4713_device {
+ /* v4l2_subdev and i2c reference (v4l2_subdev priv data) */
+ struct v4l2_subdev sd;
+ /* private data structures */
+ struct mutex mutex;
+ struct completion work;
+ struct si4713_platform_data *platform_data;
+ struct rds_info rds_info;
+ struct limiter_info limiter_info;
+ struct pilot_info pilot_info;
+ struct acomp_info acomp_info;
+ u16 frequency;
+ u8 preemphasis;
+ u8 mute;
+ u8 power_level;
+ u8 power_state;
+ u8 antenna_capacitor;
+ u8 stereo;
+ u8 tune_rssi;
+};
+
+int si4713_init(struct si4713_device *sdev);
+int si4713_setup(struct si4713_device *sdev);
+int si4713_probe(struct si4713_device *sdev);
+int si4713_set_power_level(struct si4713_device *sdev, u8 power_level);
+int si4713_get_power_level(struct si4713_device *sdev);
+int si4713_set_antenna_capacitor(struct si4713_device *sdev, u8 value);
+int si4713_get_antenna_capacitor(struct si4713_device *sdev);
+int si4713_set_power_state(struct si4713_device *sdev, u8 value);
+int si4713_set_frequency(struct si4713_device *sdev, u16 frequency);
+int si4713_get_frequency(struct si4713_device *sdev);
+int si4713_set_mute(struct si4713_device *sdev, u16 mute);
+int si4713_get_mute(struct si4713_device *sdev);
+int si4713_set_rds_pi(struct si4713_device *sdev, u16 pi);
+int si4713_get_rds_pi(struct si4713_device *sdev);
+int si4713_set_rds_pty(struct si4713_device *sdev, u8 pty);
+int si4713_get_rds_pty(struct si4713_device *sdev);
+int si4713_set_rds_ps_name(struct si4713_device *sdev, char *ps_name);
+int si4713_get_rds_ps_name(struct si4713_device *sdev, char *ps_name);
+int si4713_set_rds_radio_text(struct si4713_device *sdev, char *radio_text);
+int si4713_get_rds_radio_text(struct si4713_device *sdev, char *radio_text);
+int si4713_set_rds_enabled(struct si4713_device *sdev, u8 enabled);
+int si4713_get_rds_enabled(struct si4713_device *sdev);
+int si4713_set_limiter_release_time(struct si4713_device *sdev,
+ unsigned long rtime);
+long si4713_get_limiter_release_time(struct si4713_device *sdev);
+int si4713_set_limiter_deviation(struct si4713_device *sdev,
+ unsigned long deviation);
+long si4713_get_limiter_deviation(struct si4713_device *sdev);
+int si4713_set_limiter_enabled(struct si4713_device *sdev, u8 enabled);
+int si4713_get_limiter_enabled(struct si4713_device *sdev);
+int si4713_set_pilot_frequency(struct si4713_device *sdev, u16 freq);
+int si4713_get_pilot_frequency(struct si4713_device *sdev);
+int si4713_set_pilot_deviation(struct si4713_device *sdev,
+ unsigned long deviation);
+long si4713_get_pilot_deviation(struct si4713_device *sdev);
+int si4713_set_pilot_enabled(struct si4713_device *sdev, u8 enabled);
+int si4713_get_pilot_enabled(struct si4713_device *sdev);
+int si4713_set_stereo_enabled(struct si4713_device *sdev, u8 enabled);
+int si4713_get_stereo_enabled(struct si4713_device *sdev);
+int si4713_set_acomp_enabled(struct si4713_device *sdev, u8 enabled);
+int si4713_get_acomp_enabled(struct si4713_device *sdev);
+int si4713_set_acomp_threshold(struct si4713_device *sdev, s8 threshold);
+int si4713_get_acomp_threshold(struct si4713_device *sdev, s8 *threshold);
+int si4713_set_acomp_gain(struct si4713_device *sdev, u8 gain);
+int si4713_get_acomp_gain(struct si4713_device *sdev);
+int si4713_set_acomp_release_time(struct si4713_device *sdev,
+ unsigned long rtime);
+long si4713_get_acomp_release_time(struct si4713_device *sdev);
+int si4713_set_acomp_attack_time(struct si4713_device *sdev, u16 atime);
+int si4713_get_acomp_attack_time(struct si4713_device *sdev);
+int si4713_set_preemphasis(struct si4713_device *sdev, u8 preemphasis);
+int si4713_get_preemphasis(struct si4713_device *sdev);
+int si4713_set_tune_measure(struct si4713_device *sdev, u32 frequency);
+int si4713_get_tune_measure(struct si4713_device *sdev);
+#endif /* ifndef SI4713_H */
next prev parent reply other threads:[~2009-05-27 9:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-27 9:35 [PATCHv4 0 of 8] FM Transmitter (si4713) and another changes Eduardo Valentin
2009-05-27 9:35 ` [PATCHv4 1 of 8] v4l2_subdev i2c: Add v4l2_i2c_new_subdev_board i2c helper function Eduardo Valentin
2009-05-27 9:35 ` [PATCHv4 2 of 8] v4l2: video device: Add V4L2_CTRL_CLASS_FMTX controls Eduardo Valentin
2009-05-27 9:35 ` [PATCHv4 3 of 8] v4l2: video device: Add FMTX controls default configurations Eduardo Valentin
2009-05-27 9:35 ` [PATCHv4 4 of 8] Add documentation description for FM Transmitter Extended Control Class Eduardo Valentin
2009-05-27 9:35 ` Eduardo Valentin [this message]
2009-05-27 9:35 ` [PATCHv4 6 of 8] FMTx: si4713: Add files to add radio interface for si4713 Eduardo Valentin
2009-05-27 9:35 ` [PATCHv4 7 of 8] FMTx: si4713: Add Kconfig and Makefile entries Eduardo Valentin
2009-05-27 9:35 ` [PATCHv4 8 of 8] FMTx: si4713: Add document file Eduardo Valentin
2009-05-29 5:36 ` [PATCHv4 0 of 8] FM Transmitter (si4713) and another changes Douglas Schilling Landgraf
2009-05-29 6:03 ` Eduardo Valentin
2009-05-29 6:13 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1243416955-29748-6-git-send-email-eduardo.valentin@nokia.com \
--to=eduardo.valentin@nokia.com \
--cc=ext-Eero.Nurkkala@nokia.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.