From: Sundar Iyer <sundar.iyer@stericsson.com>
To: <linux-arm-kernel@lists.infradead.org>,
<dmitry.torokhov@gmail.com>, <sameo@linux.intel.com>,
<ben-linux@fluff.org>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Sundar Iyer <sundar.iyer@stericsson.com>
Subject: [PATCH 05/20] mach-ux500: add STMPE1601 platform data
Date: Fri, 3 Dec 2010 20:35:38 +0530 [thread overview]
Message-ID: <1291388753-14662-6-git-send-email-sundar.iyer@stericsson.com> (raw)
In-Reply-To: <1291388753-14662-1-git-send-email-sundar.iyer@stericsson.com>
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
---
arch/arm/mach-ux500/board-mop500-keypads.c | 32 ++++++++++++++++++++
arch/arm/mach-ux500/board-mop500.c | 3 ++
.../mach-ux500/include/mach/irqs-board-mop500.h | 13 +++++++-
3 files changed, 47 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500-keypads.c b/arch/arm/mach-ux500/board-mop500-keypads.c
index c1218c5..4acc4f1 100644
--- a/arch/arm/mach-ux500/board-mop500-keypads.c
+++ b/arch/arm/mach-ux500/board-mop500-keypads.c
@@ -128,7 +128,39 @@ static struct ske_keypad_platform_data ske_keypad_board = {
.debounce_ms = 40, /* in millsecs */
};
+/*
+ * STMPE1601
+ */
+static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
+ .debounce_ms = 64,
+ .scan_count = 8,
+ .no_autorepeat = true,
+ .keymap_data = &mop500_keymap_data,
+};
+
+static struct stmpe_platform_data stmpe1601_data = {
+ .id = 1,
+ .blocks = STMPE_BLOCK_KEYPAD,
+ .irq_trigger = IRQF_TRIGGER_FALLING,
+ .irq_base = MOP500_STMPE1601_IRQ(0),
+ .keypad = &stmpe1601_keypad_data,
+ .autosleep = true,
+ .autosleep_timeout = 1024,
+};
+
+static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
+ {
+ I2C_BOARD_INFO("stmpe1601", 0x40),
+ .irq = NOMADIK_GPIO_TO_IRQ(218),
+ .platform_data = &stmpe1601_data,
+ .flags = I2C_CLIENT_WAKE,
+ },
+};
+
void mop500_keypad_init(void)
{
db8500_add_ske_keypad(&ske_keypad_board);
+
+ i2c_register_board_info(0, mop500_i2c0_devices_stuib,
+ ARRAY_SIZE(mop500_i2c0_devices_stuib));
}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 9b5e66e..8f4a955 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -19,6 +19,7 @@
#include <linux/amba/pl022.h>
#include <linux/spi/spi.h>
#include <linux/mfd/ab8500.h>
+#include <linux/mfd/tc35892.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -71,6 +72,8 @@ static pin_cfg_t mop500_pins[] = {
GPIO168_KP_O0,
GPIO217_GPIO, /* GPIO_EXP_INT */
+
+ GPIO218_GPIO | PIN_INPUT_PULLUP, /* STMPE1601 IRQ */
};
static struct ab8500_platform_data ab8500_platdata = {
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 7ee8aaa..c89ae0d 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -14,6 +14,7 @@
#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \
+ AB8500_NR_IRQS)
+/* TC35892 */
#define TC35892_NR_INTERNAL_IRQS 8
#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x))
#define TC35892_NR_GPIOS 24
@@ -24,8 +25,18 @@
#define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END
#define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \
+ MOP500_EGPIO_NR_IRQS)
+/* STMPE1601 irqs */
+#define STMPE_NR_INTERNAL_IRQS 9
+#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x))
+#define STMPE_NR_GPIOS 24
+#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS)
-#define MOP500_IRQ_END MOP500_EGPIO_IRQ_END
+#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END
+#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x))
+
+#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
+
+#define MOP500_IRQ_END MOP500_NR_IRQS
#if MOP500_IRQ_END > IRQ_BOARD_END
#undef IRQ_BOARD_END
--
1.7.2.dirty
WARNING: multiple messages have this Message-ID (diff)
From: Sundar Iyer <sundar.iyer@stericsson.com>
To: linux-arm-kernel@lists.infradead.org, dmitry.torokhov@gmail.com,
sameo@linux.intel.com, ben-linux@fluff.org
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Sundar Iyer <sundar.iyer@stericsson.com>
Subject: [PATCH 05/20] mach-ux500: add STMPE1601 platform data
Date: Fri, 3 Dec 2010 20:35:38 +0530 [thread overview]
Message-ID: <1291388753-14662-6-git-send-email-sundar.iyer@stericsson.com> (raw)
In-Reply-To: <1291388753-14662-1-git-send-email-sundar.iyer@stericsson.com>
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
---
arch/arm/mach-ux500/board-mop500-keypads.c | 32 ++++++++++++++++++++
arch/arm/mach-ux500/board-mop500.c | 3 ++
.../mach-ux500/include/mach/irqs-board-mop500.h | 13 +++++++-
3 files changed, 47 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500-keypads.c b/arch/arm/mach-ux500/board-mop500-keypads.c
index c1218c5..4acc4f1 100644
--- a/arch/arm/mach-ux500/board-mop500-keypads.c
+++ b/arch/arm/mach-ux500/board-mop500-keypads.c
@@ -128,7 +128,39 @@ static struct ske_keypad_platform_data ske_keypad_board = {
.debounce_ms = 40, /* in millsecs */
};
+/*
+ * STMPE1601
+ */
+static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
+ .debounce_ms = 64,
+ .scan_count = 8,
+ .no_autorepeat = true,
+ .keymap_data = &mop500_keymap_data,
+};
+
+static struct stmpe_platform_data stmpe1601_data = {
+ .id = 1,
+ .blocks = STMPE_BLOCK_KEYPAD,
+ .irq_trigger = IRQF_TRIGGER_FALLING,
+ .irq_base = MOP500_STMPE1601_IRQ(0),
+ .keypad = &stmpe1601_keypad_data,
+ .autosleep = true,
+ .autosleep_timeout = 1024,
+};
+
+static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
+ {
+ I2C_BOARD_INFO("stmpe1601", 0x40),
+ .irq = NOMADIK_GPIO_TO_IRQ(218),
+ .platform_data = &stmpe1601_data,
+ .flags = I2C_CLIENT_WAKE,
+ },
+};
+
void mop500_keypad_init(void)
{
db8500_add_ske_keypad(&ske_keypad_board);
+
+ i2c_register_board_info(0, mop500_i2c0_devices_stuib,
+ ARRAY_SIZE(mop500_i2c0_devices_stuib));
}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 9b5e66e..8f4a955 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -19,6 +19,7 @@
#include <linux/amba/pl022.h>
#include <linux/spi/spi.h>
#include <linux/mfd/ab8500.h>
+#include <linux/mfd/tc35892.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -71,6 +72,8 @@ static pin_cfg_t mop500_pins[] = {
GPIO168_KP_O0,
GPIO217_GPIO, /* GPIO_EXP_INT */
+
+ GPIO218_GPIO | PIN_INPUT_PULLUP, /* STMPE1601 IRQ */
};
static struct ab8500_platform_data ab8500_platdata = {
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 7ee8aaa..c89ae0d 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -14,6 +14,7 @@
#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \
+ AB8500_NR_IRQS)
+/* TC35892 */
#define TC35892_NR_INTERNAL_IRQS 8
#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x))
#define TC35892_NR_GPIOS 24
@@ -24,8 +25,18 @@
#define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END
#define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \
+ MOP500_EGPIO_NR_IRQS)
+/* STMPE1601 irqs */
+#define STMPE_NR_INTERNAL_IRQS 9
+#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x))
+#define STMPE_NR_GPIOS 24
+#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS)
-#define MOP500_IRQ_END MOP500_EGPIO_IRQ_END
+#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END
+#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x))
+
+#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
+
+#define MOP500_IRQ_END MOP500_NR_IRQS
#if MOP500_IRQ_END > IRQ_BOARD_END
#undef IRQ_BOARD_END
--
1.7.2.dirty
WARNING: multiple messages have this Message-ID (diff)
From: sundar.iyer@stericsson.com (Sundar Iyer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/20] mach-ux500: add STMPE1601 platform data
Date: Fri, 3 Dec 2010 20:35:38 +0530 [thread overview]
Message-ID: <1291388753-14662-6-git-send-email-sundar.iyer@stericsson.com> (raw)
In-Reply-To: <1291388753-14662-1-git-send-email-sundar.iyer@stericsson.com>
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
---
arch/arm/mach-ux500/board-mop500-keypads.c | 32 ++++++++++++++++++++
arch/arm/mach-ux500/board-mop500.c | 3 ++
.../mach-ux500/include/mach/irqs-board-mop500.h | 13 +++++++-
3 files changed, 47 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500-keypads.c b/arch/arm/mach-ux500/board-mop500-keypads.c
index c1218c5..4acc4f1 100644
--- a/arch/arm/mach-ux500/board-mop500-keypads.c
+++ b/arch/arm/mach-ux500/board-mop500-keypads.c
@@ -128,7 +128,39 @@ static struct ske_keypad_platform_data ske_keypad_board = {
.debounce_ms = 40, /* in millsecs */
};
+/*
+ * STMPE1601
+ */
+static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
+ .debounce_ms = 64,
+ .scan_count = 8,
+ .no_autorepeat = true,
+ .keymap_data = &mop500_keymap_data,
+};
+
+static struct stmpe_platform_data stmpe1601_data = {
+ .id = 1,
+ .blocks = STMPE_BLOCK_KEYPAD,
+ .irq_trigger = IRQF_TRIGGER_FALLING,
+ .irq_base = MOP500_STMPE1601_IRQ(0),
+ .keypad = &stmpe1601_keypad_data,
+ .autosleep = true,
+ .autosleep_timeout = 1024,
+};
+
+static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
+ {
+ I2C_BOARD_INFO("stmpe1601", 0x40),
+ .irq = NOMADIK_GPIO_TO_IRQ(218),
+ .platform_data = &stmpe1601_data,
+ .flags = I2C_CLIENT_WAKE,
+ },
+};
+
void mop500_keypad_init(void)
{
db8500_add_ske_keypad(&ske_keypad_board);
+
+ i2c_register_board_info(0, mop500_i2c0_devices_stuib,
+ ARRAY_SIZE(mop500_i2c0_devices_stuib));
}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 9b5e66e..8f4a955 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -19,6 +19,7 @@
#include <linux/amba/pl022.h>
#include <linux/spi/spi.h>
#include <linux/mfd/ab8500.h>
+#include <linux/mfd/tc35892.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -71,6 +72,8 @@ static pin_cfg_t mop500_pins[] = {
GPIO168_KP_O0,
GPIO217_GPIO, /* GPIO_EXP_INT */
+
+ GPIO218_GPIO | PIN_INPUT_PULLUP, /* STMPE1601 IRQ */
};
static struct ab8500_platform_data ab8500_platdata = {
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 7ee8aaa..c89ae0d 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -14,6 +14,7 @@
#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \
+ AB8500_NR_IRQS)
+/* TC35892 */
#define TC35892_NR_INTERNAL_IRQS 8
#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x))
#define TC35892_NR_GPIOS 24
@@ -24,8 +25,18 @@
#define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END
#define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \
+ MOP500_EGPIO_NR_IRQS)
+/* STMPE1601 irqs */
+#define STMPE_NR_INTERNAL_IRQS 9
+#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x))
+#define STMPE_NR_GPIOS 24
+#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS)
-#define MOP500_IRQ_END MOP500_EGPIO_IRQ_END
+#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END
+#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x))
+
+#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
+
+#define MOP500_IRQ_END MOP500_NR_IRQS
#if MOP500_IRQ_END > IRQ_BOARD_END
#undef IRQ_BOARD_END
--
1.7.2.dirty
next prev parent reply other threads:[~2010-12-03 15:06 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-03 15:05 [PATCH 00/20] ux500: platform data, TC3589x keypad driver Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` [PATCH 01/20] mfd/ab8500: remove spi support Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-09 14:29 ` Samuel Ortiz
2010-12-09 14:29 ` Samuel Ortiz
2010-12-09 14:35 ` Sundar R IYER
2010-12-09 14:35 ` Sundar R IYER
2010-12-09 15:36 ` Samuel Ortiz
2010-12-09 15:36 ` Samuel Ortiz
2010-12-19 20:48 ` Linus Walleij
2010-12-19 20:48 ` Linus Walleij
2010-12-24 10:53 ` Samuel Ortiz
2010-12-24 10:53 ` Samuel Ortiz
2010-12-03 15:05 ` [PATCH 02/20] mach-ux500: deprecate spi support for ab8500 Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` [PATCH 03/20] mach-ux500: move keymaps to new file Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-19 20:53 ` Linus Walleij
2010-12-19 20:53 ` Linus Walleij
2010-12-03 15:05 ` [PATCH 04/20] nomadik-gpio: allow sleep mode dir/pull to differ from normal mode Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer [this message]
2010-12-03 15:05 ` [PATCH 05/20] mach-ux500: add STMPE1601 platform data Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-19 20:54 ` Linus Walleij
2010-12-19 20:54 ` Linus Walleij
2010-12-03 15:05 ` [PATCH 06/20] mfd/tc35892: rename tc35892 header to tc3589x Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-09 15:41 ` Samuel Ortiz
2010-12-09 15:41 ` Samuel Ortiz
2010-12-03 15:05 ` [PATCH 07/20] mfd/tc35892: rename tc35892 core driver " Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-09 15:42 ` Samuel Ortiz
2010-12-09 15:42 ` Samuel Ortiz
2010-12-03 15:05 ` [PATCH 08/20] mfd/tc3589x: rename tc35892 structs/registers to tc359x Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-09 15:45 ` Samuel Ortiz
2010-12-09 15:45 ` Samuel Ortiz
2010-12-03 15:05 ` [PATCH 09/20] mfd/tc3589x: add block identifier for multiple child devices Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-09 15:48 ` Samuel Ortiz
2010-12-09 15:48 ` Samuel Ortiz
2010-12-03 15:05 ` [PATCH 10/20] input/tc3589x: add tc3589x keypad support Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-05 18:38 ` Trilok Soni
2010-12-05 18:38 ` Trilok Soni
2010-12-03 15:05 ` [PATCH 11/20] mfd/tc3589x: fix random interrupt misses Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-09 15:49 ` Samuel Ortiz
2010-12-09 15:49 ` Samuel Ortiz
2010-12-10 4:31 ` Sundar R IYER
2010-12-03 15:05 ` [PATCH 12/20] mfd/tc3589x: undo gpio module reset during chip init Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-09 15:50 ` Samuel Ortiz
2010-12-09 15:50 ` Samuel Ortiz
2010-12-03 15:05 ` [PATCH 13/20] mfd/tc3589x: add suspend/resume support Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-09 17:03 ` Samuel Ortiz
2010-12-09 17:03 ` Samuel Ortiz
2010-12-10 4:32 ` Sundar R IYER
2010-12-10 4:32 ` Sundar R IYER
2010-12-10 4:32 ` Sundar R IYER
2010-12-03 15:05 ` [PATCH 14/20] plat-nomadik/gpio: add expander gpio pins enumeration Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` [PATCH 15/20] mach-ux500: add touchscreen interfaces platform data Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` [PATCH 16/20] i2c/nomadik: add adapter name for updated sanity checkings Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` [PATCH 17/20] mach-ux500: add TC35893 keypad platform data Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` [PATCH 18/20] mach-ux500: explicit enable MTU TCR in the kernel Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` [PATCH 19/20] mach-ux500: clean up checkpatch spits Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` [PATCH 20/20] i2c/nomadik: some checkpatch warnings Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-03 15:05 ` Sundar Iyer
2010-12-19 21:03 ` [PATCH 00/20] ux500: platform data, TC3589x keypad driver Linus Walleij
2010-12-19 21:03 ` Linus Walleij
2010-12-19 21:03 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291388753-14662-6-git-send-email-sundar.iyer@stericsson.com \
--to=sundar.iyer@stericsson.com \
--cc=ben-linux@fluff.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.