All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Varadarajan, Charulatha" <charu@ti.com>
To: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: tony@atomide.com, khilman@deeprootsystems.com, paul@pwsan.com,
	Charulatha V <charu@ti.com>
Subject: [PATCH 1/7] OMAP: GPIO: Make gpio_context part of gpio_bank structure
Date: Mon, 18 Apr 2011 20:36:51 +0530	[thread overview]
Message-ID: <1303139217-10285-2-git-send-email-charu@ti.com> (raw)
In-Reply-To: <no>

From: Charulatha V <charu@ti.com>

gpio_context array, which is used to save gpio bank's context,
is used only for OMAP3 architecture.

Move gpio_context as part of gpio_bank structure so that
it can be specific to each gpio bank and can be used for
any OMAP architecture

TODO: extend the gpio save/restore context function for OMAP4
architecture. This is done in one of the next patches in this
series

Signed-off-by: Charulatha V <charu@ti.com>
---
 arch/arm/plat-omap/gpio.c |   72 +++++++++++++++++++++-----------------------
 1 files changed, 34 insertions(+), 38 deletions(-)

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d2adcdd..c8736b0 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -133,6 +133,19 @@
 #define OMAP4_GPIO_CLEARDATAOUT		0x0190
 #define OMAP4_GPIO_SETDATAOUT		0x0194
 
+struct gpio_regs {
+	u32 irqenable1;
+	u32 irqenable2;
+	u32 wake_en;
+	u32 ctrl;
+	u32 oe;
+	u32 leveldetect0;
+	u32 leveldetect1;
+	u32 risingdetect;
+	u32 fallingdetect;
+	u32 dataout;
+};
+
 struct gpio_bank {
 	unsigned long pbase;
 	void __iomem *base;
@@ -145,7 +158,7 @@ struct gpio_bank {
 #endif
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
-
+	struct gpio_regs context;
 	u32 saved_datain;
 	u32 saved_fallingdetect;
 	u32 saved_risingdetect;
@@ -161,23 +174,6 @@ struct gpio_bank {
 	int stride;
 };
 
-#ifdef CONFIG_ARCH_OMAP3
-struct omap3_gpio_regs {
-	u32 irqenable1;
-	u32 irqenable2;
-	u32 wake_en;
-	u32 ctrl;
-	u32 oe;
-	u32 leveldetect0;
-	u32 leveldetect1;
-	u32 risingdetect;
-	u32 fallingdetect;
-	u32 dataout;
-};
-
-static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
-#endif
-
 /*
  * TODO: Cleanup gpio_bank usage as it is having information
  * related to all instances of the device
@@ -2034,25 +2030,25 @@ void omap_gpio_save_context(void)
 	/* saving banks from 2-6 only since GPIO1 is in WKUP */
 	for (i = 1; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		gpio_context[i].irqenable1 =
+		bank->context.irqenable1 =
 			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
-		gpio_context[i].irqenable2 =
+		bank->context.irqenable2 =
 			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
-		gpio_context[i].wake_en =
+		bank->context.wake_en =
 			__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
-		gpio_context[i].ctrl =
+		bank->context.ctrl =
 			__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
-		gpio_context[i].oe =
+		bank->context.oe =
 			__raw_readl(bank->base + OMAP24XX_GPIO_OE);
-		gpio_context[i].leveldetect0 =
+		bank->context.leveldetect0 =
 			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-		gpio_context[i].leveldetect1 =
+		bank->context.leveldetect1 =
 			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-		gpio_context[i].risingdetect =
+		bank->context.risingdetect =
 			__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
-		gpio_context[i].fallingdetect =
+		bank->context.fallingdetect =
 			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		gpio_context[i].dataout =
+		bank->context.dataout =
 			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
 	}
 }
@@ -2064,25 +2060,25 @@ void omap_gpio_restore_context(void)
 
 	for (i = 1; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		__raw_writel(gpio_context[i].irqenable1,
+		__raw_writel(bank->context.irqenable1,
 				bank->base + OMAP24XX_GPIO_IRQENABLE1);
-		__raw_writel(gpio_context[i].irqenable2,
+		__raw_writel(bank->context.irqenable2,
 				bank->base + OMAP24XX_GPIO_IRQENABLE2);
-		__raw_writel(gpio_context[i].wake_en,
+		__raw_writel(bank->context.wake_en,
 				bank->base + OMAP24XX_GPIO_WAKE_EN);
-		__raw_writel(gpio_context[i].ctrl,
+		__raw_writel(bank->context.ctrl,
 				bank->base + OMAP24XX_GPIO_CTRL);
-		__raw_writel(gpio_context[i].oe,
+		__raw_writel(bank->context.oe,
 				bank->base + OMAP24XX_GPIO_OE);
-		__raw_writel(gpio_context[i].leveldetect0,
+		__raw_writel(bank->context.leveldetect0,
 				bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-		__raw_writel(gpio_context[i].leveldetect1,
+		__raw_writel(bank->context.leveldetect1,
 				bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-		__raw_writel(gpio_context[i].risingdetect,
+		__raw_writel(bank->context.risingdetect,
 				bank->base + OMAP24XX_GPIO_RISINGDETECT);
-		__raw_writel(gpio_context[i].fallingdetect,
+		__raw_writel(bank->context.fallingdetect,
 				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		__raw_writel(gpio_context[i].dataout,
+		__raw_writel(bank->context.dataout,
 				bank->base + OMAP24XX_GPIO_DATAOUT);
 	}
 }
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: charu@ti.com (Varadarajan, Charulatha)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/7] OMAP: GPIO: Make gpio_context part of gpio_bank structure
Date: Mon, 18 Apr 2011 20:36:51 +0530	[thread overview]
Message-ID: <1303139217-10285-2-git-send-email-charu@ti.com> (raw)
In-Reply-To: <no>

From: Charulatha V <charu@ti.com>

gpio_context array, which is used to save gpio bank's context,
is used only for OMAP3 architecture.

Move gpio_context as part of gpio_bank structure so that
it can be specific to each gpio bank and can be used for
any OMAP architecture

TODO: extend the gpio save/restore context function for OMAP4
architecture. This is done in one of the next patches in this
series

Signed-off-by: Charulatha V <charu@ti.com>
---
 arch/arm/plat-omap/gpio.c |   72 +++++++++++++++++++++-----------------------
 1 files changed, 34 insertions(+), 38 deletions(-)

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d2adcdd..c8736b0 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -133,6 +133,19 @@
 #define OMAP4_GPIO_CLEARDATAOUT		0x0190
 #define OMAP4_GPIO_SETDATAOUT		0x0194
 
+struct gpio_regs {
+	u32 irqenable1;
+	u32 irqenable2;
+	u32 wake_en;
+	u32 ctrl;
+	u32 oe;
+	u32 leveldetect0;
+	u32 leveldetect1;
+	u32 risingdetect;
+	u32 fallingdetect;
+	u32 dataout;
+};
+
 struct gpio_bank {
 	unsigned long pbase;
 	void __iomem *base;
@@ -145,7 +158,7 @@ struct gpio_bank {
 #endif
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
-
+	struct gpio_regs context;
 	u32 saved_datain;
 	u32 saved_fallingdetect;
 	u32 saved_risingdetect;
@@ -161,23 +174,6 @@ struct gpio_bank {
 	int stride;
 };
 
-#ifdef CONFIG_ARCH_OMAP3
-struct omap3_gpio_regs {
-	u32 irqenable1;
-	u32 irqenable2;
-	u32 wake_en;
-	u32 ctrl;
-	u32 oe;
-	u32 leveldetect0;
-	u32 leveldetect1;
-	u32 risingdetect;
-	u32 fallingdetect;
-	u32 dataout;
-};
-
-static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
-#endif
-
 /*
  * TODO: Cleanup gpio_bank usage as it is having information
  * related to all instances of the device
@@ -2034,25 +2030,25 @@ void omap_gpio_save_context(void)
 	/* saving banks from 2-6 only since GPIO1 is in WKUP */
 	for (i = 1; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		gpio_context[i].irqenable1 =
+		bank->context.irqenable1 =
 			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
-		gpio_context[i].irqenable2 =
+		bank->context.irqenable2 =
 			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
-		gpio_context[i].wake_en =
+		bank->context.wake_en =
 			__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
-		gpio_context[i].ctrl =
+		bank->context.ctrl =
 			__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
-		gpio_context[i].oe =
+		bank->context.oe =
 			__raw_readl(bank->base + OMAP24XX_GPIO_OE);
-		gpio_context[i].leveldetect0 =
+		bank->context.leveldetect0 =
 			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-		gpio_context[i].leveldetect1 =
+		bank->context.leveldetect1 =
 			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-		gpio_context[i].risingdetect =
+		bank->context.risingdetect =
 			__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
-		gpio_context[i].fallingdetect =
+		bank->context.fallingdetect =
 			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		gpio_context[i].dataout =
+		bank->context.dataout =
 			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
 	}
 }
@@ -2064,25 +2060,25 @@ void omap_gpio_restore_context(void)
 
 	for (i = 1; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		__raw_writel(gpio_context[i].irqenable1,
+		__raw_writel(bank->context.irqenable1,
 				bank->base + OMAP24XX_GPIO_IRQENABLE1);
-		__raw_writel(gpio_context[i].irqenable2,
+		__raw_writel(bank->context.irqenable2,
 				bank->base + OMAP24XX_GPIO_IRQENABLE2);
-		__raw_writel(gpio_context[i].wake_en,
+		__raw_writel(bank->context.wake_en,
 				bank->base + OMAP24XX_GPIO_WAKE_EN);
-		__raw_writel(gpio_context[i].ctrl,
+		__raw_writel(bank->context.ctrl,
 				bank->base + OMAP24XX_GPIO_CTRL);
-		__raw_writel(gpio_context[i].oe,
+		__raw_writel(bank->context.oe,
 				bank->base + OMAP24XX_GPIO_OE);
-		__raw_writel(gpio_context[i].leveldetect0,
+		__raw_writel(bank->context.leveldetect0,
 				bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-		__raw_writel(gpio_context[i].leveldetect1,
+		__raw_writel(bank->context.leveldetect1,
 				bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-		__raw_writel(gpio_context[i].risingdetect,
+		__raw_writel(bank->context.risingdetect,
 				bank->base + OMAP24XX_GPIO_RISINGDETECT);
-		__raw_writel(gpio_context[i].fallingdetect,
+		__raw_writel(bank->context.fallingdetect,
 				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		__raw_writel(gpio_context[i].dataout,
+		__raw_writel(bank->context.dataout,
 				bank->base + OMAP24XX_GPIO_DATAOUT);
 	}
 }
-- 
1.7.1

  parent reply	other threads:[~2011-04-18 15:03 UTC|newest]

Thread overview: 206+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <no>
2008-08-15  2:20 ` [PATCH 00/07] dyn_array/nr_irqs/sparse_irq support v10 - fix Yinghai Lu
2008-08-15  2:20   ` [PATCH 1/7] x86: some debug info for 32bit sparse_irq Yinghai Lu
2008-08-15  2:20     ` [PATCH 2/7] x86: remove union about dest for log/phy Yinghai Lu
2008-08-15  2:20       ` [PATCH 3/7] x86: make 32bit support per_cpu vector fix #1 Yinghai Lu
2008-08-15  2:20         ` [PATCH 4/7] x86_64: rename irq_desc/irq_desc_with_new - fix Yinghai Lu
2008-08-15  2:20           ` [PATCH 5/7] x86: make 32bit support per_cpu vector fix #2 Yinghai Lu
2008-08-15  2:20             ` [PATCH 6/7] x86: ordering functions in io_apic_32.c Yinghai Lu
2008-08-15  2:20               ` [PATCH 7/7] x86: ordering functions in io_apic_64.c Yinghai Lu
2008-08-15  8:21         ` [PATCH 3/7] x86: make 32bit support per_cpu vector fix #1 Ingo Molnar
2008-08-15  8:29           ` Yinghai Lu
2008-08-15  8:51             ` Ingo Molnar
2008-08-15  8:27   ` [PATCH 00/07] dyn_array/nr_irqs/sparse_irq support v10 - fix Ingo Molnar
2008-08-15  8:34     ` Yinghai Lu
2008-08-15  8:51       ` Ingo Molnar
2008-08-15  9:35         ` Ingo Molnar
2008-08-15 10:00           ` Peter Zijlstra
2008-08-15 10:19             ` Ingo Molnar
2008-08-15 10:28               ` Peter Zijlstra
2008-08-15 17:07                 ` Yinghai Lu
2008-08-15 23:42 ` [PATCH 0/7] merge io_apic_xx.c Yinghai Lu
2008-08-15 23:42   ` [PATCH 1/7] x86: ordering functions in io_apic_32.c - fix Yinghai Lu
2008-08-15 23:42     ` [PATCH 2/7] x86: make headers files the smae in io_apic_xx.c Yinghai Lu
2008-08-15 23:42       ` [PATCH 3/7] x86: make 64 handle sis_apic_bug like the 32 bit Yinghai Lu
2008-08-15 23:42         ` [PATCH 4/7] x86: remve ioapic_force Yinghai Lu
2008-08-15 23:42           ` [PATCH 5/7] x86: make io_apic_64.c and io_apic_32.c the same Yinghai Lu
2008-08-15 23:42             ` [PATCH 6/7] rename io_apic_64.c to io_apic.c Yinghai Lu
2008-08-15 23:42               ` [PATCH 7/7] make 32 bit have io_apic resource in /proc/iomem Yinghai Lu
2008-08-16  8:02               ` [PATCH 6/7] rename io_apic_64.c to io_apic.c Ingo Molnar
2008-08-16  8:22                 ` [PATCH] x86: io_apic.c, build fix Ingo Molnar
2008-08-16  8:26                   ` Yinghai Lu
2008-08-18  4:12 ` [PATCH] x86: apic - unify lapic_resume - fix Yinghai Lu
2008-08-18  4:12   ` [PATCH 1/2] x86: make HAVE_SPARSE_IRQ support selectable Yinghai Lu
2008-08-18  4:12     ` [PATCH 2/2] irq: rename irq_desc() to to_irq_desc() Yinghai Lu
2008-08-18  7:37       ` Ingo Molnar
2008-08-18 18:14         ` Yinghai Lu
2008-08-18  7:25   ` [PATCH] x86: apic - unify lapic_resume - fix Ingo Molnar
2008-08-18 20:44 ` [PATCH] irq: rename irq_desc() to to_irq_desc() " Yinghai Lu
2008-08-18 20:44   ` [PATCH] irq: rename irq_desc() to to_irq_desc() - fix #2 Yinghai Lu
2008-08-18 20:44     ` [PATCH] irq: rename irq_desc() to to_irq_desc() - fix #3 Yinghai Lu
2008-08-19  0:11       ` Ingo Molnar
2008-08-19  0:38         ` Ingo Molnar
2008-08-19  0:48           ` Yinghai Lu
2008-08-19  1:16             ` Ingo Molnar
2010-04-15  9:02 ` [U-Boot] [PATCH] OpenRD: Bring PCIe endpoint out of reset Tanmay Upadhyay
2010-04-20  5:51 ` Tanmay Upadhyay
2010-04-30  6:49   ` Prafulla Wadaskar
2010-04-22 13:16 ` [PATCH] OpenRD: Enable SD/UART selection for serial port 1 Tanmay Upadhyay
2010-05-04 12:48 ` [U-Boot] [PATCH] OpenRD: Reset PCIe endpoint while boot-up through PERST# Tanmay Upadhyay
2010-06-10  9:12 ` [U-Boot] [PATCH] ARM: Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate Tanmay Upadhyay
2010-06-10  9:16   ` Simon Kagstrom
2010-06-10  9:38     ` Tanmay Upadhyay
2010-06-10 10:25       ` Simon Kagstrom
2010-06-10 19:03         ` Prafulla Wadaskar
2010-06-14 11:02           ` Tanmay Upadhyay
2010-06-13 11:53   ` Albert ARIBAUD
2010-06-13 12:41     ` Wolfgang Denk
2010-06-13 12:51     ` Wolfgang Denk
2010-06-13 13:39       ` Albert ARIBAUD
2010-08-10  8:29 ` [PATCH v2] OpenRD: Enable SD/UART selection for serial port 1 Tanmay Upadhyay
2010-08-10  8:56   ` Alexander Clouter
2010-08-10  8:58     ` Alexander Clouter
2010-08-10 10:27       ` Tanmay Upadhyay
2010-08-10 10:28         ` Alexander Clouter
2010-08-10 10:49           ` Tanmay Upadhyay
2010-08-10 11:53             ` Alexander Clouter
2010-08-11  5:21               ` Tanmay Upadhyay
2010-08-10  8:40 ` [PATCH] ARM: Fix broken Kconfig in arch/arm Tanmay Upadhyay
2011-03-02  8:38 ` [RFC PATCH 1/5] x86/Kconfig: Add Page Cache Accounting entry Liu Yuan
2011-03-02  8:38   ` Liu Yuan
2011-03-02 16:24   ` Randy Dunlap
2011-03-02 16:24     ` Randy Dunlap
2011-03-03  3:11     ` Liu Yuan
2011-03-02  8:38 ` [RFC PATCH 2/5] block: Add functions and data types for Page Cache Accounting Liu Yuan
2011-03-02  8:38   ` Liu Yuan
2011-03-02  8:38 ` [RFC PATCH 3/5] block: Make Page Cache counters work with sysfs Liu Yuan
2011-03-02  8:38   ` Liu Yuan
2011-03-02  8:38 ` [RFC PATCH 4/5] mm: Add hit/miss accounting for Page Cache Liu Yuan
2011-03-02  8:38   ` Liu Yuan
2011-03-02  8:45   ` Ingo Molnar
2011-03-02  8:45     ` Ingo Molnar
2011-03-02 17:02     ` Dave Hansen
2011-03-02 17:02       ` Dave Hansen
2011-03-02 18:49       ` Ingo Molnar
2011-03-02 18:49         ` Ingo Molnar
2011-03-03  0:33         ` Wu Fengguang
2011-03-03  0:33           ` Wu Fengguang
2011-03-03  2:01     ` KOSAKI Motohiro
2011-03-03  2:01       ` KOSAKI Motohiro
2011-03-03  3:14     ` Tao Ma
2011-03-03  3:14       ` Tao Ma
2011-03-03  9:34       ` Ingo Molnar
2011-03-03  9:34         ` Ingo Molnar
2011-03-03 15:08         ` Tao Ma
2011-03-03 15:08           ` Tao Ma
2011-03-02  8:38 ` [RFC PATCH 5/5] mm: Add readpages accounting Liu Yuan
2011-03-02  8:38   ` Liu Yuan
2011-04-18 15:06 ` [v2 0/7] OMAP: GPIO: Use PM runtime framework Varadarajan, Charulatha
2011-04-18 15:06   ` Varadarajan, Charulatha
2011-04-19  6:26   ` Tony Lindgren
2011-04-19  6:26     ` Tony Lindgren
2011-04-20 23:59     ` Kevin Hilman
2011-04-20 23:59       ` Kevin Hilman
2011-04-21  5:42       ` Tony Lindgren
2011-04-21  5:42         ` Tony Lindgren
2011-04-21 15:15         ` Kevin Hilman
2011-04-21 15:15           ` Kevin Hilman
2011-04-22  6:11           ` Tony Lindgren
2011-04-22  6:11             ` Tony Lindgren
2011-04-23  8:35         ` Linus Walleij
2011-04-23  8:35           ` Linus Walleij
2011-04-26  7:29           ` Tony Lindgren
2011-04-26  7:29             ` Tony Lindgren
2011-04-27 13:18             ` Linus Walleij
2011-04-27 13:18               ` Linus Walleij
2011-05-03 16:22               ` Kevin Hilman
2011-05-03 16:22                 ` Kevin Hilman
2011-05-03 21:41                 ` Linus Walleij
2011-05-03 21:41                   ` Linus Walleij
2011-05-04  6:19                   ` Tony Lindgren
2011-05-04  6:19                     ` Tony Lindgren
2011-05-12  0:57                     ` Linus Walleij
2011-05-12  0:57                       ` Linus Walleij
2011-05-12  9:42                       ` Kevin Hilman
2011-05-12  9:42                         ` Kevin Hilman
2011-05-19 19:08                         ` Grant Likely
2011-05-19 19:08                           ` Grant Likely
2011-05-20  3:34                           ` Shawn Guo
2011-05-20  3:34                             ` Shawn Guo
2011-05-19 19:05                       ` Grant Likely
2011-05-19 19:05                         ` Grant Likely
2011-04-18 15:06 ` Varadarajan, Charulatha [this message]
2011-04-18 15:06   ` [PATCH 1/7] OMAP: GPIO: Make gpio_context part of gpio_bank structure Varadarajan, Charulatha
2011-04-18 15:06 ` [PATCH 2/7] OMAP: GPIO: Use flag to identify wkup dmn GPIO Varadarajan, Charulatha
2011-04-18 15:06   ` Varadarajan, Charulatha
2011-04-18 15:06 ` [PATCH 3/7] OMAP4: GPIO: Save/restore context Varadarajan, Charulatha
2011-04-18 15:06   ` Varadarajan, Charulatha
2011-04-21  0:26   ` Kevin Hilman
2011-04-21  0:26     ` Kevin Hilman
2011-04-18 15:06 ` [PATCH 4/7] OMAP: GPIO: handle save/restore ctx in GPIO driver Varadarajan, Charulatha
2011-04-18 15:06   ` Varadarajan, Charulatha
2011-04-18 15:06 ` [PATCH 5/7] OMAP2+: GPIO: make workaround_enabled bank specific Varadarajan, Charulatha
2011-04-18 15:06   ` Varadarajan, Charulatha
2011-04-18 15:06 ` [PATCH 6/7] OMAP: GPIO: Cleanup prepare_for_idle/resume Varadarajan, Charulatha
2011-04-18 15:06   ` Varadarajan, Charulatha
2011-04-18 15:06 ` [PATCH 7/7] OMAP: GPIO: use PM runtime framework Varadarajan, Charulatha
2011-04-18 15:06   ` Varadarajan, Charulatha
2011-07-05  7:17 ` [U-Boot] [PATCH v2] Armada100: Add Board Support for Marvell GuruPlug-Display Ajay Bhargav
2011-07-06  5:49   ` Prafulla Wadaskar
2011-07-14  9:37 ` [PATCH 1/2] ARM: pxa168: gplugD: Get rid of mfp-gplugd.h Tanmay Upadhyay
2011-07-18  6:00   ` Eric Miao
2011-07-14  9:37 ` [PATCH 2/2] ARM: pxa168: gplugD: bug-fix: Free correct GPIO Tanmay Upadhyay
2011-07-18  5:59   ` Eric Miao
2011-09-14  5:59 ` [PATCH] mmc: sdhci-pxa: Check pdata before using its members Tanmay Upadhyay
2011-09-14  6:15   ` zhangfei gao
2011-09-21 18:12   ` Chris Ball
2011-11-14  9:43 ` [U-Boot] [Patch V2] mmc: mv_sdhci: Fix host version read for Armada100 Ajay Bhargav
2011-11-25 23:44   ` Andy Fleming
2011-12-06 11:07 ` [PATCH] USB: pxa168: Fix compilation error Tanmay Upadhyay
2011-12-06 11:25   ` Sergei Shtylyov
2011-12-08  4:33     ` [PATCH v2] " Tanmay Upadhyay
2011-12-07 19:57   ` [PATCH] " Alan Stern
2012-02-07 22:58 ` [PATCH v2] add support for AR6003 2048 byte board file Prasanna Kumar
2012-02-08  9:41   ` Kalle Valo
2012-07-10 13:46 ` [Qemu-devel] [PATCH] pseries iommu: h_put_tce split to support more IOMMUs Alexey Kardashevskiy
2012-07-10 13:46   ` [Qemu-devel] [PATCH] pseries pci: removed cached qemu_irq from PCI host bus Alexey Kardashevskiy
2012-07-10 13:46   ` [Qemu-devel] [PATCH] pseries: added allocator for a block of IRQs Alexey Kardashevskiy
2012-07-10 13:46   ` [Qemu-devel] [PATCH] pseries pci: enable debugging with disabled emulated PCI bus Alexey Kardashevskiy
2012-07-10 13:46   ` [Qemu-devel] [PATCH] xics: added end-of-interrupt (EOI) handlers Alexey Kardashevskiy
2012-07-13  8:04     ` Alexey Kardashevskiy
2012-07-10 13:46   ` [Qemu-devel] [PATCH] pseries dma: DMA window params added to PHB and DT population changed Alexey Kardashevskiy
2012-07-25  5:20 ` [PATCH] fixed a macro coding style issue Baodong Chen
2012-07-25  5:27   ` Venu Byravarasu
2012-07-25  5:37   ` Dmitry Torokhov
2012-07-25  6:09     ` Baodong Chen
2012-07-25  6:15     ` Al Viro
2012-07-25  6:36       ` Dmitry Torokhov
2012-07-31  7:27         ` Dmitry Torokhov
2012-09-27 12:51 ` [PATCH 1/8] fs/namespace.c: introduce helper function path_unmounted() Yan Hong
2012-09-27 12:51   ` [PATCH 2/8] fs/namespace.c: remove unused macro MNT_WRITER_UNDERFLOW_LIMIT Yan Hong
2012-09-27 12:51   ` [PATCH 3/8] fs/namespace.c: trivial code clean Yan Hong
2012-09-27 12:51   ` [PATCH 4/8] fs/namespace.c: check permission early in sys_[u]mount Yan Hong
2012-09-27 12:51   ` [PATCH 5/8] fs/namei.c: introduce macro AT_FDINV Yan Hong
2012-09-27 12:51   ` [PATCH 6/8] fs/inode.c: call alloc_inode() in new_inode() directly Yan Hong
2012-09-27 12:51   ` [PATCH 7/8] fs/inode.c: remove outstanding spin lock prefetch Yan Hong
2012-09-27 12:51   ` [PATCH 8/8] vfs: misc comment clean Yan Hong
2013-01-07 18:11 ` [PATCH] Staging: android: fixed const coding style issue in binder.c Patrik Karlin
2013-01-07 23:01   ` Greg KH
2013-11-11  9:27 ` [PATCH 1/2] mklibs: add dependency on dpkg-native Lei Liu
2013-11-11  9:27 ` [PATCH 2/2] Fix grep pattern when mklibs collects executables in rootfs Lei Liu
2013-11-12 10:23   ` Richard Purdie
2013-11-13  3:05     ` Lei Liu
2013-11-22 22:33       ` Nicolas Dechesne
     [not found]         ` <52955AAB.6000801@gmail.com>
2013-11-27 13:00           ` Nicolas Dechesne
2014-02-08  2:29 ` [PATCH v2] SUNRPC: Allow one callback request to be received from two sk_buff shaobingqing
2014-02-08 19:14   ` Sergei Shtylyov
2014-02-08 19:14     ` Sergei Shtylyov
2014-02-10 17:46   ` Trond Myklebust
2014-02-10 17:46     ` Trond Myklebust
2014-02-11 19:42     ` [PATCH v2] SUNRPC: RPC callbacks may be split across several TCP segments Trond Myklebust
2019-02-18 11:59 ` [PATCH] net/bonding: fix reset active slave Hari Kumar Vemula
2019-02-18 15:58   ` Radu Nicolau
2019-02-20 12:33     ` [dpdk-stable] " Ferruh Yigit
2019-02-20 14:56       ` Radu Nicolau
2019-02-20 15:16         ` Hyong Youb Kim
2019-02-22  1:52           ` Chas Williams
2019-02-22 13:57             ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1303139217-10285-2-git-send-email-charu@ti.com \
    --to=charu@ti.com \
    --cc=khilman@deeprootsystems.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.