From: Boojin Kim <boojin.kim@samsung.com> To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Cc: Vinod Koul <vinod.koul@intel.com>, Dan Williams <dan.j.williams@intel.com>, Jassi Brar <jassisinghbrar@gmail.com>, Kukjin Kim <kgene.kim@samsung.com>, Mark Brown <broonie@opensource.wolfsonmicro.com>, Grant Likely <grant.likely@secretlab.ca>, Russell King <linux@arm.linux.org.uk>, Boojin Kim <boojin.kim@samsung.com> Subject: [PATCH 13/15] spi/s3c64xx: Merge dma control code Date: Wed, 27 Jul 2011 14:31:35 +0900 [thread overview] Message-ID: <1311744697-10264-14-git-send-email-boojin.kim@samsung.com> (raw) In-Reply-To: <1311744697-10264-1-git-send-email-boojin.kim@samsung.com> This patch modifies to merge the dma control code. Original s3c64xx spi driver has each dma control code for rx and tx channel. This patch merges these dma control codes into one. With this patch, a dma setup function and callback function handle for both rx and tx channel. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> --- drivers/spi/spi_s3c64xx.c | 140 ++++++++++++++++++++++++-------------------- 1 files changed, 76 insertions(+), 64 deletions(-) diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index a4cf76a..de71f55 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -132,6 +132,12 @@ #define RXBUSY (1<<2) #define TXBUSY (1<<3) +struct s3c64xx_spi_dma_data { + unsigned ch; + enum dma_data_direction direction; + enum dma_ch dmach; +}; + /** * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. * @clk: Pointer to the spi clock. @@ -165,15 +171,13 @@ struct s3c64xx_spi_driver_data { struct work_struct work; struct list_head queue; spinlock_t lock; - enum dma_ch rx_dmach; - enum dma_ch tx_dmach; unsigned long sfr_start; struct completion xfer_completion; unsigned state; unsigned cur_mode, cur_bpw; unsigned cur_speed; - unsigned rx_ch; - unsigned tx_ch; + struct s3c64xx_spi_dma_data rx_dma; + struct s3c64xx_spi_dma_data tx_dma; struct samsung_dma_ops *ops; }; @@ -230,36 +234,76 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) writel(val, regs + S3C64XX_SPI_CH_CFG); } -static void s3c64xx_spi_dma_rxcb(void *data) +static void s3c64xx_spi_dmacb(void *data) { - struct s3c64xx_spi_driver_data *sdd - = (struct s3c64xx_spi_driver_data *)data; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_dma_data *dma = data; unsigned long flags; + if (dma->direction == DMA_FROM_DEVICE) + sdd = container_of(data, + struct s3c64xx_spi_driver_data, rx_dma); + else + sdd = container_of(data, + struct s3c64xx_spi_driver_data, tx_dma); + spin_lock_irqsave(&sdd->lock, flags); - sdd->state &= ~RXBUSY; - /* If the other done */ - if (!(sdd->state & TXBUSY)) - complete(&sdd->xfer_completion); + if (dma->direction == DMA_FROM_DEVICE) { + sdd->state &= ~RXBUSY; + if (!(sdd->state & TXBUSY)) + complete(&sdd->xfer_completion); + } else { + sdd->state &= ~TXBUSY; + if (!(sdd->state & RXBUSY)) + complete(&sdd->xfer_completion); + } spin_unlock_irqrestore(&sdd->lock, flags); } -static void s3c64xx_spi_dma_txcb(void *data) +static void prepare_dma(struct s3c64xx_spi_dma_data *dma, + unsigned len, dma_addr_t buf) { - struct s3c64xx_spi_driver_data *sdd - = (struct s3c64xx_spi_driver_data *)data; - unsigned long flags; + struct s3c64xx_spi_driver_data *sdd; + struct samsung_dma_prep_info info; - spin_lock_irqsave(&sdd->lock, flags); + if (dma->direction == DMA_FROM_DEVICE) + sdd = container_of((void *)dma, + struct s3c64xx_spi_driver_data, rx_dma); + else + sdd = container_of((void *)dma, + struct s3c64xx_spi_driver_data, tx_dma); - sdd->state &= ~TXBUSY; - /* If the other done */ - if (!(sdd->state & RXBUSY)) - complete(&sdd->xfer_completion); + info.cap = DMA_SLAVE; + info.len = len; + info.fp = s3c64xx_spi_dmacb; + info.fp_param = dma; + info.direction = dma->direction; + info.buf = buf; + + sdd->ops->prepare(dma->ch, &info); + sdd->ops->trigger(dma->ch); +} - spin_unlock_irqrestore(&sdd->lock, flags); +static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) +{ + struct samsung_dma_info info; + + sdd->ops = samsung_dma_get_ops(); + + info.cap = DMA_SLAVE; + info.client = &s3c64xx_spi_dma_client; + info.width = sdd->cur_bpw / 8; + + info.direction = sdd->rx_dma.direction; + info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA; + sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &info); + info.direction = sdd->tx_dma.direction; + info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA; + sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &info); + + return 1; } static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, @@ -269,7 +313,6 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; u32 modecfg, chcfg; - struct samsung_dma_prep_info info; modecfg = readl(regs + S3C64XX_SPI_MODE_CFG); modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); @@ -295,14 +338,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, chcfg |= S3C64XX_SPI_CH_TXCH_ON; if (dma_mode) { modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; - info.cap = DMA_SLAVE; - info.direction = DMA_TO_DEVICE; - info.buf = xfer->tx_dma; - info.len = xfer->len; - info.fp = s3c64xx_spi_dma_txcb; - info.fp_param = sdd; - sdd->ops->prepare(sdd->tx_ch, &info); - sdd->ops->trigger(sdd->tx_ch); + prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma); } else { switch (sdd->cur_bpw) { case 32: @@ -334,14 +370,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) | S3C64XX_SPI_PACKET_CNT_EN, regs + S3C64XX_SPI_PACKET_CNT); - info.cap = DMA_SLAVE; - info.direction = DMA_FROM_DEVICE; - info.buf = xfer->rx_dma; - info.len = xfer->len; - info.fp = s3c64xx_spi_dma_rxcb; - info.fp_param = sdd; - sdd->ops->prepare(sdd->rx_ch, &info); - sdd->ops->trigger(sdd->rx_ch); + prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma); } } @@ -701,10 +730,10 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd, if (use_dma) { if (xfer->tx_buf != NULL && (sdd->state & TXBUSY)) - sdd->ops->stop(sdd->tx_ch); + sdd->ops->stop(sdd->tx_dma.ch); if (xfer->rx_buf != NULL && (sdd->state & RXBUSY)) - sdd->ops->stop(sdd->rx_ch); + sdd->ops->stop(sdd->rx_dma.ch); } goto out; @@ -742,25 +771,6 @@ out: msg->complete(msg->context); } -static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) -{ - - struct samsung_dma_info info; - sdd->ops = samsung_dma_get_ops(); - - info.cap = DMA_SLAVE; - info.client = &s3c64xx_spi_dma_client; - info.direction = DMA_FROM_DEVICE; - info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA; - info.width = sdd->cur_bpw / 8; - sdd->rx_ch = sdd->ops->request(sdd->rx_dmach, &info); - info.direction = DMA_TO_DEVICE; - info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA; - sdd->tx_ch = sdd->ops->request(sdd->tx_dmach, &info); - - return 1; -} - static void s3c64xx_spi_work(struct work_struct *work) { struct s3c64xx_spi_driver_data *sdd = container_of(work, @@ -797,8 +807,8 @@ static void s3c64xx_spi_work(struct work_struct *work) spin_unlock_irqrestore(&sdd->lock, flags); /* Free DMA channels */ - sdd->ops->release(sdd->rx_ch, &s3c64xx_spi_dma_client); - sdd->ops->release(sdd->tx_ch, &s3c64xx_spi_dma_client); + sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client); + sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client); } static int s3c64xx_spi_transfer(struct spi_device *spi, @@ -1015,8 +1025,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) sdd->cntrlr_info = sci; sdd->pdev = pdev; sdd->sfr_start = mem_res->start; - sdd->tx_dmach = dmatx_res->start; - sdd->rx_dmach = dmarx_res->start; + sdd->tx_dma.dmach = dmatx_res->start; + sdd->tx_dma.direction = DMA_TO_DEVICE; + sdd->rx_dma.dmach = dmarx_res->start; + sdd->rx_dma.direction = DMA_FROM_DEVICE; sdd->cur_bpw = 8; @@ -1104,7 +1116,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) pdev->id, master->num_chipselect); dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n", mem_res->end, mem_res->start, - sdd->rx_dmach, sdd->tx_dmach); + sdd->rx_dma.dmach, sdd->tx_dma.dmach); return 0; -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: boojin.kim@samsung.com (Boojin Kim) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 13/15] spi/s3c64xx: Merge dma control code Date: Wed, 27 Jul 2011 14:31:35 +0900 [thread overview] Message-ID: <1311744697-10264-14-git-send-email-boojin.kim@samsung.com> (raw) In-Reply-To: <1311744697-10264-1-git-send-email-boojin.kim@samsung.com> This patch modifies to merge the dma control code. Original s3c64xx spi driver has each dma control code for rx and tx channel. This patch merges these dma control codes into one. With this patch, a dma setup function and callback function handle for both rx and tx channel. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> --- drivers/spi/spi_s3c64xx.c | 140 ++++++++++++++++++++++++-------------------- 1 files changed, 76 insertions(+), 64 deletions(-) diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index a4cf76a..de71f55 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -132,6 +132,12 @@ #define RXBUSY (1<<2) #define TXBUSY (1<<3) +struct s3c64xx_spi_dma_data { + unsigned ch; + enum dma_data_direction direction; + enum dma_ch dmach; +}; + /** * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. * @clk: Pointer to the spi clock. @@ -165,15 +171,13 @@ struct s3c64xx_spi_driver_data { struct work_struct work; struct list_head queue; spinlock_t lock; - enum dma_ch rx_dmach; - enum dma_ch tx_dmach; unsigned long sfr_start; struct completion xfer_completion; unsigned state; unsigned cur_mode, cur_bpw; unsigned cur_speed; - unsigned rx_ch; - unsigned tx_ch; + struct s3c64xx_spi_dma_data rx_dma; + struct s3c64xx_spi_dma_data tx_dma; struct samsung_dma_ops *ops; }; @@ -230,36 +234,76 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) writel(val, regs + S3C64XX_SPI_CH_CFG); } -static void s3c64xx_spi_dma_rxcb(void *data) +static void s3c64xx_spi_dmacb(void *data) { - struct s3c64xx_spi_driver_data *sdd - = (struct s3c64xx_spi_driver_data *)data; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_dma_data *dma = data; unsigned long flags; + if (dma->direction == DMA_FROM_DEVICE) + sdd = container_of(data, + struct s3c64xx_spi_driver_data, rx_dma); + else + sdd = container_of(data, + struct s3c64xx_spi_driver_data, tx_dma); + spin_lock_irqsave(&sdd->lock, flags); - sdd->state &= ~RXBUSY; - /* If the other done */ - if (!(sdd->state & TXBUSY)) - complete(&sdd->xfer_completion); + if (dma->direction == DMA_FROM_DEVICE) { + sdd->state &= ~RXBUSY; + if (!(sdd->state & TXBUSY)) + complete(&sdd->xfer_completion); + } else { + sdd->state &= ~TXBUSY; + if (!(sdd->state & RXBUSY)) + complete(&sdd->xfer_completion); + } spin_unlock_irqrestore(&sdd->lock, flags); } -static void s3c64xx_spi_dma_txcb(void *data) +static void prepare_dma(struct s3c64xx_spi_dma_data *dma, + unsigned len, dma_addr_t buf) { - struct s3c64xx_spi_driver_data *sdd - = (struct s3c64xx_spi_driver_data *)data; - unsigned long flags; + struct s3c64xx_spi_driver_data *sdd; + struct samsung_dma_prep_info info; - spin_lock_irqsave(&sdd->lock, flags); + if (dma->direction == DMA_FROM_DEVICE) + sdd = container_of((void *)dma, + struct s3c64xx_spi_driver_data, rx_dma); + else + sdd = container_of((void *)dma, + struct s3c64xx_spi_driver_data, tx_dma); - sdd->state &= ~TXBUSY; - /* If the other done */ - if (!(sdd->state & RXBUSY)) - complete(&sdd->xfer_completion); + info.cap = DMA_SLAVE; + info.len = len; + info.fp = s3c64xx_spi_dmacb; + info.fp_param = dma; + info.direction = dma->direction; + info.buf = buf; + + sdd->ops->prepare(dma->ch, &info); + sdd->ops->trigger(dma->ch); +} - spin_unlock_irqrestore(&sdd->lock, flags); +static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) +{ + struct samsung_dma_info info; + + sdd->ops = samsung_dma_get_ops(); + + info.cap = DMA_SLAVE; + info.client = &s3c64xx_spi_dma_client; + info.width = sdd->cur_bpw / 8; + + info.direction = sdd->rx_dma.direction; + info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA; + sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &info); + info.direction = sdd->tx_dma.direction; + info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA; + sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &info); + + return 1; } static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, @@ -269,7 +313,6 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; u32 modecfg, chcfg; - struct samsung_dma_prep_info info; modecfg = readl(regs + S3C64XX_SPI_MODE_CFG); modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); @@ -295,14 +338,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, chcfg |= S3C64XX_SPI_CH_TXCH_ON; if (dma_mode) { modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; - info.cap = DMA_SLAVE; - info.direction = DMA_TO_DEVICE; - info.buf = xfer->tx_dma; - info.len = xfer->len; - info.fp = s3c64xx_spi_dma_txcb; - info.fp_param = sdd; - sdd->ops->prepare(sdd->tx_ch, &info); - sdd->ops->trigger(sdd->tx_ch); + prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma); } else { switch (sdd->cur_bpw) { case 32: @@ -334,14 +370,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) | S3C64XX_SPI_PACKET_CNT_EN, regs + S3C64XX_SPI_PACKET_CNT); - info.cap = DMA_SLAVE; - info.direction = DMA_FROM_DEVICE; - info.buf = xfer->rx_dma; - info.len = xfer->len; - info.fp = s3c64xx_spi_dma_rxcb; - info.fp_param = sdd; - sdd->ops->prepare(sdd->rx_ch, &info); - sdd->ops->trigger(sdd->rx_ch); + prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma); } } @@ -701,10 +730,10 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd, if (use_dma) { if (xfer->tx_buf != NULL && (sdd->state & TXBUSY)) - sdd->ops->stop(sdd->tx_ch); + sdd->ops->stop(sdd->tx_dma.ch); if (xfer->rx_buf != NULL && (sdd->state & RXBUSY)) - sdd->ops->stop(sdd->rx_ch); + sdd->ops->stop(sdd->rx_dma.ch); } goto out; @@ -742,25 +771,6 @@ out: msg->complete(msg->context); } -static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) -{ - - struct samsung_dma_info info; - sdd->ops = samsung_dma_get_ops(); - - info.cap = DMA_SLAVE; - info.client = &s3c64xx_spi_dma_client; - info.direction = DMA_FROM_DEVICE; - info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA; - info.width = sdd->cur_bpw / 8; - sdd->rx_ch = sdd->ops->request(sdd->rx_dmach, &info); - info.direction = DMA_TO_DEVICE; - info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA; - sdd->tx_ch = sdd->ops->request(sdd->tx_dmach, &info); - - return 1; -} - static void s3c64xx_spi_work(struct work_struct *work) { struct s3c64xx_spi_driver_data *sdd = container_of(work, @@ -797,8 +807,8 @@ static void s3c64xx_spi_work(struct work_struct *work) spin_unlock_irqrestore(&sdd->lock, flags); /* Free DMA channels */ - sdd->ops->release(sdd->rx_ch, &s3c64xx_spi_dma_client); - sdd->ops->release(sdd->tx_ch, &s3c64xx_spi_dma_client); + sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client); + sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client); } static int s3c64xx_spi_transfer(struct spi_device *spi, @@ -1015,8 +1025,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) sdd->cntrlr_info = sci; sdd->pdev = pdev; sdd->sfr_start = mem_res->start; - sdd->tx_dmach = dmatx_res->start; - sdd->rx_dmach = dmarx_res->start; + sdd->tx_dma.dmach = dmatx_res->start; + sdd->tx_dma.direction = DMA_TO_DEVICE; + sdd->rx_dma.dmach = dmarx_res->start; + sdd->rx_dma.direction = DMA_FROM_DEVICE; sdd->cur_bpw = 8; @@ -1104,7 +1116,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) pdev->id, master->num_chipselect); dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n", mem_res->end, mem_res->start, - sdd->rx_dmach, sdd->tx_dmach); + sdd->rx_dma.dmach, sdd->tx_dma.dmach); return 0; -- 1.7.1
next prev parent reply other threads:[~2011-07-27 5:39 UTC|newest] Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-07-27 5:31 [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 6:14 ` [RFC PATCH] DMA: PL330: Update PL330 DMAC to support runtime PM Chanwoo Choi 2011-07-27 6:14 ` Chanwoo Choi 2011-07-27 7:31 ` Jassi Brar 2011-07-27 7:31 ` Jassi Brar 2011-07-27 8:53 ` Russell King - ARM Linux 2011-07-27 8:53 ` Russell King - ARM Linux 2011-07-27 9:43 ` Chanwoo Choi 2011-07-27 9:43 ` Chanwoo Choi 2011-07-27 7:43 ` [PATCH 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC Jassi Brar 2011-07-27 7:43 ` Jassi Brar 2011-07-27 5:31 ` [PATCH 02/15] DMA: PL330: Update PL330 DMA API driver Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 03/15] DMA: PL330: Support DMA_SLAVE_CONFIG command Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 04/15] DMA: PL330: Add DMA_CYCLIC capability Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 05/15] ARM: SAMSUNG: Update to use PL330-DMA driver Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 06/15] ARM: SAMSUNG: Add common DMA operations Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 07/15] ARM: EXYNOS4: Use generic DMA PL330 driver Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-08-15 9:36 ` Thomas Abraham 2011-08-15 9:36 ` Thomas Abraham 2011-08-15 14:15 ` Thomas Abraham 2011-08-15 14:15 ` Thomas Abraham 2011-08-21 8:51 ` Russell King - ARM Linux 2011-08-21 8:51 ` Russell King - ARM Linux 2011-07-27 5:31 ` [PATCH 08/15] ARM: S5PV210: " Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 09/15] ARM: S5PC100: " Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 10/15] ARM: S5P64X0: " Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 11/15] ARM: SAMSUNG: Remove S3C-PL330-DMA driver Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 12/15] spi/s3c64xx: Add support DMA engine API Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-08-08 17:47 ` Jassi Brar 2011-08-08 17:47 ` Jassi Brar 2011-08-08 17:55 ` Heiko Stübner 2011-08-08 17:55 ` Heiko Stübner 2011-08-08 18:16 ` Jassi Brar 2011-08-08 18:16 ` Jassi Brar 2011-08-08 18:26 ` Heiko Stübner 2011-08-08 18:26 ` Heiko Stübner 2011-08-09 4:13 ` Alim Akhtar 2011-08-09 4:13 ` Alim Akhtar 2011-08-19 10:30 ` Alim Akhtar 2011-08-19 10:30 ` Alim Akhtar 2011-08-21 8:46 ` Russell King - ARM Linux 2011-08-21 8:46 ` Russell King - ARM Linux 2011-08-25 1:13 ` Alim Akhtar 2011-08-25 1:13 ` Alim Akhtar 2011-08-11 7:42 ` Boojin Kim 2011-08-11 7:42 ` Boojin Kim 2011-07-27 5:31 ` Boojin Kim [this message] 2011-07-27 5:31 ` [PATCH 13/15] spi/s3c64xx: Merge dma control code Boojin Kim 2011-08-08 18:32 ` Jassi Brar 2011-08-08 18:32 ` Jassi Brar 2011-07-27 5:31 ` [PATCH 14/15] ASoC: Samsung: Update DMA interface Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-08-08 19:27 ` Jassi Brar 2011-08-08 19:27 ` Jassi Brar 2011-08-11 10:04 ` Boojin Kim 2011-08-11 10:04 ` Boojin Kim 2011-07-27 5:31 ` [PATCH 15/15] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction Boojin Kim 2011-07-27 5:31 ` Boojin Kim 2011-08-04 16:53 ` [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA Linus Walleij 2011-08-04 16:53 ` Linus Walleij 2011-08-08 16:45 ` Koul, Vinod 2011-08-08 16:45 ` Koul, Vinod 2011-08-11 7:26 ` Kukjin Kim 2011-08-11 7:26 ` Kukjin Kim 2011-08-11 22:27 ` Koul, Vinod 2011-08-11 22:27 ` Koul, Vinod 2011-08-13 4:11 ` Kukjin Kim 2011-08-13 4:11 ` Kukjin Kim 2011-08-16 11:01 ` Koul, Vinod 2011-08-16 11:01 ` Koul, Vinod 2011-08-19 5:24 ` Kukjin Kim 2011-08-19 5:24 ` Kukjin Kim 2011-08-19 13:04 ` Koul, Vinod 2011-08-19 13:04 ` Koul, Vinod
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1311744697-10264-14-git-send-email-boojin.kim@samsung.com \ --to=boojin.kim@samsung.com \ --cc=broonie@opensource.wolfsonmicro.com \ --cc=dan.j.williams@intel.com \ --cc=grant.likely@secretlab.ca \ --cc=jassisinghbrar@gmail.com \ --cc=kgene.kim@samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=vinod.koul@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.