From: Hemant Pedanekar <hemantp@ti.com> To: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, Tony Lindgren <tony@atomide.com>, Kevin Hilman <khilman@ti.com>, Paul Walmsley <paul@pwsan.com>, Hemant Pedanekar <hemantp@ti.com> Subject: [PATCH 3/3] TI814X: Create board support and enable build for TI8148 EVM Date: Thu, 4 Aug 2011 23:15:03 +0530 [thread overview] Message-ID: <1312479903-22909-1-git-send-email-hemantp@ti.com> (raw) This patch adds minimal support and build configuration for TI8148 EVM. Also adds support for low level debugging on UART1 console on the EVM. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> --- arch/arm/mach-omap2/Kconfig | 5 ++ arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-ti8148evm.c | 57 ++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/uncompress.h | 3 + 4 files changed, 66 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/board-ti8148evm.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 242d9ab..4dacb8e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -317,6 +317,11 @@ config MACH_TI8168EVM depends on SOC_OMAPTI81XX default y +config MACH_TI8148EVM + bool "TI8148 Evaluation Module" + depends on SOC_OMAPTI81XX + default y + config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" default y diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fb02937..fa54361 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -262,6 +262,7 @@ obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \ hsmmc.o obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o +obj-$(CONFIG_MACH_TI8148EVM) += board-ti8148evm.o # Platform specific device init code usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o obj-y += $(usbfs-m) $(usbfs-y) diff --git a/arch/arm/mach-omap2/board-ti8148evm.c b/arch/arm/mach-omap2/board-ti8148evm.c new file mode 100644 index 0000000..588d6b7 --- /dev/null +++ b/arch/arm/mach-omap2/board-ti8148evm.c @@ -0,0 +1,57 @@ +/* + * Code for TI8148 EVM. + * + * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/irqs.h> +#include <plat/board.h> +#include <plat/common.h> + +static struct omap_board_config_kernel ti8148_evm_config[] __initdata = { +}; + +static void __init ti8148_init_early(void) +{ + omap2_init_common_infrastructure(); + omap2_init_common_devices(NULL, NULL); +} + +static void __init ti8148_evm_init(void) +{ + omap_serial_init(); + omap_board_config = ti8148_evm_config; + omap_board_config_size = ARRAY_SIZE(ti8148_evm_config); +} + +static void __init ti8148_evm_map_io(void) +{ + omap2_set_globals_ti81xx(); + omapti81xx_map_common_io(); +} + +MACHINE_START(TI8148EVM, "ti8148evm") + /* Maintainer: Texas Instruments */ + .boot_params = 0x80000100, + .map_io = ti8148_evm_map_io, + .init_early = ti8148_init_early, + .init_irq = ti81xx_init_irq, + .timer = &omap3_timer, + .init_machine = ti8148_evm_init, +MACHINE_END diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 40336ad..8d052e7 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -175,6 +175,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* TI8168 base boards using UART3 */ DEBUG_LL_TI81XX(3, ti8168evm); + /* TI8148 base boards using UART1 */ + DEBUG_LL_TI81XX(1, ti8148evm); + } while (0); } -- 1.7.3.5
WARNING: multiple messages have this Message-ID (diff)
From: hemantp@ti.com (Hemant Pedanekar) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/3] TI814X: Create board support and enable build for TI8148 EVM Date: Thu, 4 Aug 2011 23:15:03 +0530 [thread overview] Message-ID: <1312479903-22909-1-git-send-email-hemantp@ti.com> (raw) This patch adds minimal support and build configuration for TI8148 EVM. Also adds support for low level debugging on UART1 console on the EVM. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> --- arch/arm/mach-omap2/Kconfig | 5 ++ arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-ti8148evm.c | 57 ++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/uncompress.h | 3 + 4 files changed, 66 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/board-ti8148evm.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 242d9ab..4dacb8e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -317,6 +317,11 @@ config MACH_TI8168EVM depends on SOC_OMAPTI81XX default y +config MACH_TI8148EVM + bool "TI8148 Evaluation Module" + depends on SOC_OMAPTI81XX + default y + config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" default y diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fb02937..fa54361 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -262,6 +262,7 @@ obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \ hsmmc.o obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o +obj-$(CONFIG_MACH_TI8148EVM) += board-ti8148evm.o # Platform specific device init code usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o obj-y += $(usbfs-m) $(usbfs-y) diff --git a/arch/arm/mach-omap2/board-ti8148evm.c b/arch/arm/mach-omap2/board-ti8148evm.c new file mode 100644 index 0000000..588d6b7 --- /dev/null +++ b/arch/arm/mach-omap2/board-ti8148evm.c @@ -0,0 +1,57 @@ +/* + * Code for TI8148 EVM. + * + * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/irqs.h> +#include <plat/board.h> +#include <plat/common.h> + +static struct omap_board_config_kernel ti8148_evm_config[] __initdata = { +}; + +static void __init ti8148_init_early(void) +{ + omap2_init_common_infrastructure(); + omap2_init_common_devices(NULL, NULL); +} + +static void __init ti8148_evm_init(void) +{ + omap_serial_init(); + omap_board_config = ti8148_evm_config; + omap_board_config_size = ARRAY_SIZE(ti8148_evm_config); +} + +static void __init ti8148_evm_map_io(void) +{ + omap2_set_globals_ti81xx(); + omapti81xx_map_common_io(); +} + +MACHINE_START(TI8148EVM, "ti8148evm") + /* Maintainer: Texas Instruments */ + .boot_params = 0x80000100, + .map_io = ti8148_evm_map_io, + .init_early = ti8148_init_early, + .init_irq = ti81xx_init_irq, + .timer = &omap3_timer, + .init_machine = ti8148_evm_init, +MACHINE_END diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 40336ad..8d052e7 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -175,6 +175,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* TI8168 base boards using UART3 */ DEBUG_LL_TI81XX(3, ti8168evm); + /* TI8148 base boards using UART1 */ + DEBUG_LL_TI81XX(1, ti8148evm); + } while (0); } -- 1.7.3.5
next reply other threads:[~2011-08-04 17:45 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-08-04 17:45 Hemant Pedanekar [this message] 2011-08-04 17:45 ` [PATCH 3/3] TI814X: Create board support and enable build for TI8148 EVM Hemant Pedanekar 2011-08-15 15:15 ` Tony Lindgren 2011-08-15 15:15 ` Tony Lindgren 2011-08-19 4:27 ` Pedanekar, Hemant 2011-08-19 4:27 ` Pedanekar, Hemant 2011-08-30 0:13 ` Kevin Hilman 2011-08-30 0:13 ` Kevin Hilman 2011-09-08 1:21 ` Pedanekar, Hemant 2011-09-08 1:21 ` Pedanekar, Hemant
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1312479903-22909-1-git-send-email-hemantp@ti.com \ --to=hemantp@ti.com \ --cc=khilman@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=paul@pwsan.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.