All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/10] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx
Date: Fri, 31 Aug 2012 00:34:39 +0000	[thread overview]
Message-ID: <1346373285-19588-5-git-send-email-horms@verge.net.au> (raw)
In-Reply-To: <1346373285-19588-1-git-send-email-horms@verge.net.au>

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

PENCx is Power Enable Control pin for USB.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7779.h |  2 +-
 arch/arm/mach-shmobile/pfc-r8a7779.c          | 16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index b07ad31..7597a37 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -71,7 +71,7 @@ enum {
 	GPIO_FN_A19,
 
 	/* IPSR0 */
-	GPIO_FN_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
+	GPIO_FN_USB_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
 	GPIO_FN_SCIF_CLK, GPIO_FN_TCLK0_C, GPIO_FN_BS, GPIO_FN_SD1_DAT2,
 	GPIO_FN_MMC0_D2, GPIO_FN_FD2, GPIO_FN_ATADIR0, GPIO_FN_SDSELF,
 	GPIO_FN_HCTS1, GPIO_FN_TX4_C, GPIO_FN_A0, GPIO_FN_SD1_DAT3,
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index d14c9b0..9fac32e4 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -140,7 +140,7 @@ enum {
 	FN_IP7_3_2, FN_IP7_6_4, FN_IP7_9_7, FN_IP7_12_10,
 	FN_IP7_14_13, FN_IP2_7_4, FN_IP2_11_8, FN_IP2_15_12,
 	FN_IP1_28_25, FN_IP2_3_0, FN_IP8_3_0, FN_IP8_7_4,
-	FN_IP8_11_8, FN_IP8_15_12, FN_PENC0, FN_PENC1,
+	FN_IP8_11_8, FN_IP8_15_12, FN_USB_PENC0, FN_USB_PENC1,
 	FN_IP0_2_0, FN_IP8_17_16, FN_IP8_18, FN_IP8_19,
 
 	/* GPSR5 */
@@ -176,7 +176,7 @@ enum {
 	FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3,
 	FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
 	FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
-	FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
+	FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
 	FN_SCIF_CLK, FN_TCLK0_C,
 
 	/* IPSR1 */
@@ -447,7 +447,7 @@ enum {
 	A0_MARK, SD1_DAT3_MARK, MMC0_D3_MARK, FD3_MARK,
 	BS_MARK, SD1_DAT2_MARK, MMC0_D2_MARK, FD2_MARK,
 	ATADIR0_MARK, SDSELF_MARK, HCTS1_MARK, TX4_C_MARK,
-	PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
+	USB_PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
 	SCIF_CLK_MARK, TCLK0_C_MARK,
 
 	EX_CS0_MARK, RX3_C_IRDA_RX_C_MARK, MMC0_D6_MARK,
@@ -658,7 +658,7 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(A18_MARK, FN_A18),
 	PINMUX_DATA(A19_MARK, FN_A19),
 
-	PINMUX_IPSR_DATA(IP0_2_0, PENC2),
+	PINMUX_IPSR_DATA(IP0_2_0, USB_PENC2),
 	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCK0, SEL_SCIF0_0),
 	PINMUX_IPSR_DATA(IP0_2_0, PWM1),
 	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, PWMFSW0, SEL_PWMFSW_0),
@@ -1456,7 +1456,7 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(A19),
 
 	/* IPSR0 */
-	GPIO_FN(PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
+	GPIO_FN(USB_PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
 	GPIO_FN(SCIF_CLK), GPIO_FN(TCLK0_C), GPIO_FN(BS), GPIO_FN(SD1_DAT2),
 	GPIO_FN(MMC0_D2), GPIO_FN(FD2), GPIO_FN(ATADIR0), GPIO_FN(SDSELF),
 	GPIO_FN(HCTS1), GPIO_FN(TX4_C), GPIO_FN(A0), GPIO_FN(SD1_DAT3),
@@ -1865,8 +1865,8 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		GP_4_30_FN, FN_IP8_18,
 		GP_4_29_FN, FN_IP8_17_16,
 		GP_4_28_FN, FN_IP0_2_0,
-		GP_4_27_FN, FN_PENC1,
-		GP_4_26_FN, FN_PENC0,
+		GP_4_27_FN, FN_USB_PENC1,
+		GP_4_26_FN, FN_USB_PENC0,
 		GP_4_25_FN, FN_IP8_15_12,
 		GP_4_24_FN, FN_IP8_11_8,
 		GP_4_23_FN, FN_IP8_7_4,
@@ -1981,7 +1981,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
 		FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
 		/* IP0_2_0 [3] */
-		FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
+		FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
 		FN_SCIF_CLK, FN_TCLK0_C, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32,
-- 
1.7.10.2.484.gcd07cc5


WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/10] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx
Date: Fri, 31 Aug 2012 09:34:39 +0900	[thread overview]
Message-ID: <1346373285-19588-5-git-send-email-horms@verge.net.au> (raw)
In-Reply-To: <1346373285-19588-1-git-send-email-horms@verge.net.au>

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

PENCx is Power Enable Control pin for USB.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7779.h |  2 +-
 arch/arm/mach-shmobile/pfc-r8a7779.c          | 16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index b07ad31..7597a37 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -71,7 +71,7 @@ enum {
 	GPIO_FN_A19,
 
 	/* IPSR0 */
-	GPIO_FN_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
+	GPIO_FN_USB_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
 	GPIO_FN_SCIF_CLK, GPIO_FN_TCLK0_C, GPIO_FN_BS, GPIO_FN_SD1_DAT2,
 	GPIO_FN_MMC0_D2, GPIO_FN_FD2, GPIO_FN_ATADIR0, GPIO_FN_SDSELF,
 	GPIO_FN_HCTS1, GPIO_FN_TX4_C, GPIO_FN_A0, GPIO_FN_SD1_DAT3,
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index d14c9b0..9fac32e4 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -140,7 +140,7 @@ enum {
 	FN_IP7_3_2, FN_IP7_6_4, FN_IP7_9_7, FN_IP7_12_10,
 	FN_IP7_14_13, FN_IP2_7_4, FN_IP2_11_8, FN_IP2_15_12,
 	FN_IP1_28_25, FN_IP2_3_0, FN_IP8_3_0, FN_IP8_7_4,
-	FN_IP8_11_8, FN_IP8_15_12, FN_PENC0, FN_PENC1,
+	FN_IP8_11_8, FN_IP8_15_12, FN_USB_PENC0, FN_USB_PENC1,
 	FN_IP0_2_0, FN_IP8_17_16, FN_IP8_18, FN_IP8_19,
 
 	/* GPSR5 */
@@ -176,7 +176,7 @@ enum {
 	FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3,
 	FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
 	FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
-	FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
+	FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
 	FN_SCIF_CLK, FN_TCLK0_C,
 
 	/* IPSR1 */
@@ -447,7 +447,7 @@ enum {
 	A0_MARK, SD1_DAT3_MARK, MMC0_D3_MARK, FD3_MARK,
 	BS_MARK, SD1_DAT2_MARK, MMC0_D2_MARK, FD2_MARK,
 	ATADIR0_MARK, SDSELF_MARK, HCTS1_MARK, TX4_C_MARK,
-	PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
+	USB_PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
 	SCIF_CLK_MARK, TCLK0_C_MARK,
 
 	EX_CS0_MARK, RX3_C_IRDA_RX_C_MARK, MMC0_D6_MARK,
@@ -658,7 +658,7 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(A18_MARK, FN_A18),
 	PINMUX_DATA(A19_MARK, FN_A19),
 
-	PINMUX_IPSR_DATA(IP0_2_0, PENC2),
+	PINMUX_IPSR_DATA(IP0_2_0, USB_PENC2),
 	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCK0, SEL_SCIF0_0),
 	PINMUX_IPSR_DATA(IP0_2_0, PWM1),
 	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, PWMFSW0, SEL_PWMFSW_0),
@@ -1456,7 +1456,7 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(A19),
 
 	/* IPSR0 */
-	GPIO_FN(PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
+	GPIO_FN(USB_PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
 	GPIO_FN(SCIF_CLK), GPIO_FN(TCLK0_C), GPIO_FN(BS), GPIO_FN(SD1_DAT2),
 	GPIO_FN(MMC0_D2), GPIO_FN(FD2), GPIO_FN(ATADIR0), GPIO_FN(SDSELF),
 	GPIO_FN(HCTS1), GPIO_FN(TX4_C), GPIO_FN(A0), GPIO_FN(SD1_DAT3),
@@ -1865,8 +1865,8 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		GP_4_30_FN, FN_IP8_18,
 		GP_4_29_FN, FN_IP8_17_16,
 		GP_4_28_FN, FN_IP0_2_0,
-		GP_4_27_FN, FN_PENC1,
-		GP_4_26_FN, FN_PENC0,
+		GP_4_27_FN, FN_USB_PENC1,
+		GP_4_26_FN, FN_USB_PENC0,
 		GP_4_25_FN, FN_IP8_15_12,
 		GP_4_24_FN, FN_IP8_11_8,
 		GP_4_23_FN, FN_IP8_7_4,
@@ -1981,7 +1981,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
 		FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
 		/* IP0_2_0 [3] */
-		FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
+		FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
 		FN_SCIF_CLK, FN_TCLK0_C, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32,
-- 
1.7.10.2.484.gcd07cc5

  parent reply	other threads:[~2012-08-31  0:34 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-31  0:34 [GIT PULL] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7 Simon Horman
2012-08-31  0:34 ` Simon Horman
2012-08-31  0:34 ` [PATCH 01/10] r8a7779: add SDHI clock support Simon Horman
2012-08-31  0:34   ` Simon Horman
2012-08-31  0:34 ` [PATCH 02/10] marzen: add SDHI0 support Simon Horman
2012-08-31  0:34   ` Simon Horman
2012-08-31  0:34 ` [PATCH 03/10] ARM: mach-shmobile: marzen: defconfig update Simon Horman
2012-08-31  0:34   ` Simon Horman
2012-08-31  0:34 ` Simon Horman [this message]
2012-08-31  0:34   ` [PATCH 04/10] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx Simon Horman
2012-08-31  0:34 ` [PATCH 05/10] ARM: shmobile: r8a7779: add USB common phy initializer Simon Horman
2012-08-31  0:34   ` Simon Horman
2012-08-31  0:34 ` [PATCH 06/10] ARM: shmobile: r8a7779: add USB EHCI clock support Simon Horman
2012-08-31  0:34   ` Simon Horman
2012-08-31  0:34 ` [PATCH 07/10] ARM: shmobile: r8a7779: add USB OHCI " Simon Horman
2012-08-31  0:34   ` Simon Horman
2012-08-31  0:34 ` [PATCH 08/10] ARM: shmobile: marzen: add USB EHCI driver support Simon Horman
2012-08-31  0:34   ` Simon Horman
2012-08-31  0:34 ` [PATCH 09/10] ARM: shmobile: marzen: fixup regulator id for smsc911x Simon Horman
2012-08-31  0:34   ` Simon Horman
2012-08-31  0:34 ` [PATCH 10/10] ARM: shmobile: marzen: enable thermal sensor Simon Horman
2012-08-31  0:34   ` Simon Horman
2012-08-31  0:41 ` [GIT PULL] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7 Simon Horman
2012-08-31  0:41   ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346373285-19588-5-git-send-email-horms@verge.net.au \
    --to=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.