From: ville.syrjala@linux.intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 27/33] drm/i915: Spell out VLV_DISPLAY_BASE for interrupt registers
Date: Thu, 24 Jan 2013 15:29:52 +0200 [thread overview]
Message-ID: <1359034198-19678-28-git-send-email-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <1359034198-19678-1-git-send-email-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Instead of 0x18xxxx use (VLV_DISPLAY_BASE + xxxx).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 943eda3..6a944b5 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -559,11 +559,11 @@
#define ISR 0x020ac
#define VLV_GUNIT_CLOCK_GATE (VLV_DISPLAY_BASE + 0x2060)
#define GCFG_DIS (1<<8)
-#define VLV_IIR_RW 0x182084
-#define VLV_IER 0x1820a0
-#define VLV_IIR 0x1820a4
-#define VLV_IMR 0x1820a8
-#define VLV_ISR 0x1820ac
+#define VLV_IIR_RW (VLV_DISPLAY_BASE + 0x2084)
+#define VLV_IER (VLV_DISPLAY_BASE + 0x20a0)
+#define VLV_IIR (VLV_DISPLAY_BASE + 0x20a4)
+#define VLV_IMR (VLV_DISPLAY_BASE + 0x20a8)
+#define VLV_ISR (VLV_DISPLAY_BASE + 0x20ac)
#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
--
1.7.12.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2013-01-24 13:31 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-24 13:29 [PATCH 00/33] drm/915: Get rid of IS_DISPLAYREG() ville.syrjala
2013-01-24 13:29 ` [PATCH 01/33] drm/i915: Convert intel_hdmi to enum port ville.syrjala
2013-01-24 17:49 ` Paulo Zanoni
2013-01-24 13:29 ` [PATCH 02/33] drm/i915: Convert intel_dp " ville.syrjala
2013-01-24 17:54 ` Paulo Zanoni
2013-01-25 12:28 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 03/33] drm/i915: Add display_display_mmio_offset to intel_device_info ville.syrjala
2013-01-24 13:29 ` [PATCH 04/33] drm/i915: AUD_VID_DID needs an offset on VLV ville.syrjala
2013-01-24 13:29 ` [PATCH 05/33] drm/i915: Per-pipe PP registers are for VLV only ville.syrjala
2013-01-24 13:29 ` [PATCH 06/33] drm/i915: VLV_VIDEO_DIP_CTL is " ville.syrjala
2013-01-24 13:29 ` [PATCH 07/33] drm/i915: PIPE M/N registers need an offset on VLV ville.syrjala
2013-01-24 13:29 ` [PATCH 08/33] drm/i915: SWF screatch " ville.syrjala
2013-01-24 21:37 ` Daniel Vetter
2013-01-25 12:26 ` Ville Syrjälä
2013-01-25 16:21 ` Daniel Vetter
2013-01-26 16:41 ` Daniel Vetter
2013-01-24 13:29 ` [PATCH 09/33] drm/i915: VGACNTRL needs " ville.syrjala
2013-01-24 21:39 ` Daniel Vetter
2013-01-25 12:21 ` Ville Syrjälä
2013-01-25 16:00 ` Daniel Vetter
2013-01-25 16:22 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 10/33] drm/i915: Primary plane registers need " ville.syrjala
2013-01-24 13:29 ` [PATCH 11/33] drm/i915: Pipe " ville.syrjala
2013-01-24 13:29 ` [PATCH 12/33] drm/i915: Cursor " ville.syrjala
2013-01-24 13:29 ` [PATCH 13/33] drm/i915: VLV_DDL is VLV only and needs an offset ville.syrjala
2013-01-24 13:29 ` [PATCH 14/33] drm/i915: DSPFW registers need an offset on VLV ville.syrjala
2013-01-24 13:29 ` [PATCH 15/33] drm/i915: DSPARB register needs " ville.syrjala
2013-01-24 22:01 ` Daniel Vetter
2013-01-25 12:05 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 16/33] drm/i915: DPFLIPSTAT and DPINVGTT registers are VLV only and need an offset ville.syrjala
2013-01-24 13:29 ` [PATCH 17/33] drm/i915: Pass VLV_DISPLAY_BASE + reg to intel_init_{sdvo, hdmi, dp} on VLV ville.syrjala
2013-01-24 22:05 ` Daniel Vetter
2013-01-25 12:03 ` Ville Syrjälä
2013-01-25 16:02 ` Daniel Vetter
2013-01-24 13:29 ` [PATCH 18/33] drm/i915: Panel fitter registers need an offset " ville.syrjala
2013-01-24 13:29 ` [PATCH 19/33] drm/i915: PORT_HOTPLUG " ville.syrjala
2013-01-24 13:29 ` [PATCH 20/33] drm/i915: VLV_ADPA must be used in VLV code ville.syrjala
2013-01-24 22:12 ` Daniel Vetter
2013-01-25 11:59 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 21/33] drm/i915: Pipe timing registers need an offset on VLV ville.syrjala
2013-01-24 13:29 ` [PATCH 22/33] drm/i915: Pipe palette " ville.syrjala
2013-01-24 22:22 ` Daniel Vetter
2013-01-25 10:57 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 23/33] drm/i915: FB_BLC_SELF_VLV is VLV only and needs an offset ville.syrjala
2013-01-24 13:29 ` [PATCH 24/33] drm/i915: VLV doesn't seem to have VGA0/VGA1/VGA_PD registers ville.syrjala
2013-01-24 22:26 ` Daniel Vetter
2013-01-25 10:51 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 25/33] drm/i915: PLL and clock gating registers need an offset on VLV ville.syrjala
2013-01-24 22:41 ` Daniel Vetter
2013-01-25 10:51 ` Ville Syrjälä
2013-01-25 16:06 ` Daniel Vetter
2013-01-25 16:20 ` Ville Syrjälä
2013-01-25 16:24 ` Daniel Vetter
2013-01-25 16:28 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 26/33] drm/i915: Make VLV_GUNIT_CLOCK_GATE register value more readable ville.syrjala
2013-01-24 13:29 ` ville.syrjala [this message]
2013-01-24 13:29 ` [PATCH 28/33] drm/i915: DPIO registers are VLV only and need an offset ville.syrjala
2013-01-24 13:29 ` [PATCH 29/33] drm/i915: VGA registers need an offset on VLV ville.syrjala
2013-01-24 22:44 ` Daniel Vetter
2013-01-25 10:27 ` Ville Syrjälä
2013-01-25 16:18 ` Daniel Vetter
2013-01-25 16:24 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 30/33] drm/i915: GPIO/GMBUS " ville.syrjala
2013-01-24 13:29 ` [PATCH 31/33] drm/i915: Set display_mmio_offset for VLV ville.syrjala
2013-01-24 22:59 ` Daniel Vetter
2013-01-24 13:29 ` [PATCH 32/33] drm/i915: Kill IS_DISPLAYREG() ville.syrjala
2013-01-24 13:29 ` [PATCH 33/33] drm/i915: Kill VLV specific interrupts registers ville.syrjala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359034198-19678-28-git-send-email-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.