[PATCH 1/3] Revert "drm/i915: dynamic Haswell display power well support"

[Daniel Vetter <daniel.vetter@ffwll.ch>]

This reverts commit d6dd9eb1d96d2b7345fe4664066c2b7ed86da898.

The current hsw power wells code seems to break audio - the current
audio driver presumes that register contents are preserved when
disablng an output, which is no longer true with the power wells code.

And Takashi Iwai also reported a black screen regression. He has a
machine with an eDP panel on port D (usual all-in-one config), which
intel_dp.c identifies correctly as an eDP output, but our the power
wells code does not differentiate between eDP on port A or D. And the
magic only works on port A.

References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_ddi.c     |    8 +-------
 drivers/gpu/drm/i915/intel_display.c |   31 -------------------------------
 2 files changed, 1 insertion(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 8d0bac3..42c79bf 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -992,13 +992,7 @@ void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
 	if (cpu_transcoder == TRANSCODER_EDP) {
 		switch (pipe) {
 		case PIPE_A:
-			/* Can only use the always-on power well for eDP when
-			 * not using the panel fitter, and when not using motion
-			  * blur mitigation (which we don't support). */
-			if (dev_priv->pch_pf_size)
-				temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
-			else
-				temp |= TRANS_DDI_EDP_INPUT_A_ON;
+			temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
 			break;
 		case PIPE_B:
 			temp |= TRANS_DDI_EDP_INPUT_B_ONOFF;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 287b42c..7114e68 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5710,35 +5710,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	return fdi_config_ok ? ret : -EINVAL;
 }
 
-static void haswell_modeset_global_resources(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	bool enable = false;
-	struct intel_crtc *crtc;
-	struct intel_encoder *encoder;
-
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
-		if (crtc->pipe != PIPE_A && crtc->base.enabled)
-			enable = true;
-		/* XXX: Should check for edp transcoder here, but thanks to init
-		 * sequence that's not yet available. Just in case desktop eDP
-		 * on PORT D is possible on haswell, too. */
-	}
-
-	list_for_each_entry(encoder, &dev->mode_config.encoder_list,
-			    base.head) {
-		if (encoder->type != INTEL_OUTPUT_EDP &&
-		    encoder->connectors_active)
-			enable = true;
-	}
-
-	/* Even the eDP panel fitter is outside the always-on well. */
-	if (dev_priv->pch_pf_size)
-		enable = true;
-
-	intel_set_power_well(dev, enable);
-}
-
 static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 				 struct drm_display_mode *mode,
 				 struct drm_display_mode *adjusted_mode,
@@ -8635,8 +8606,6 @@ static void intel_init_display(struct drm_device *dev)
 		} else if (IS_HASWELL(dev)) {
 			dev_priv->display.fdi_link_train = hsw_fdi_link_train;
 			dev_priv->display.write_eld = haswell_write_eld;
-			dev_priv->display.modeset_global_resources =
-				haswell_modeset_global_resources;
 		}
 	} else if (IS_G4X(dev)) {
 		dev_priv->display.write_eld = g4x_write_eld;
-- 
1.7.10.4