All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: Felipe Balbi <balbi@ti.com>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Subject: [PATCH v8 01/20] usb: phy: msm: Make driver selectable on ARCH_QCOM
Date: Mon, 28 Apr 2014 16:34:04 +0300	[thread overview]
Message-ID: <1398692063-11372-2-git-send-email-iivanov@mm-sol.com> (raw)
In-Reply-To: <1398692063-11372-1-git-send-email-iivanov@mm-sol.com>

From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

Controller could be found on APQ and MSM platforms,
make configuration description more generic.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
---
 drivers/usb/phy/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 416e0c8..0c668a3 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -171,11 +171,11 @@ config USB_ISP1301
 	  module will be called phy-isp1301.

 config USB_MSM_OTG
-	tristate "OTG support for Qualcomm on-chip USB controller"
-	depends on (USB || USB_GADGET) && ARCH_MSM
+	tristate "Qualcomm on-chip USB OTG controller support"
+	depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM)
 	select USB_PHY
 	help
-	  Enable this to support the USB OTG transceiver on MSM chips. It
+	  Enable this to support the USB OTG transceiver on Qualcomm chips. It
 	  handles PHY initialization, clock management, and workarounds
 	  required after resetting the hardware and power management.
 	  This driver is required even for peripheral only or host only
--
1.8.3.2

  reply	other threads:[~2014-04-28 13:34 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-28 13:34 [PATCH v8 00/20] usb: phy: msm: Fixes, cleanups and DT support Ivan T. Ivanov
2014-04-28 13:34 ` Ivan T. Ivanov [this message]
2014-04-28 13:34 ` [PATCH v8 02/20] usb: phy: msm: Remove __init macro from driver probe method Ivan T. Ivanov
     [not found]   ` <535E893B.7050609@cogentembedded.com>
     [not found]     ` <20140428170357.GP30292@saruman.home>
2014-04-28 17:52       ` Ivan T. Ivanov
2014-04-28 17:54         ` Felipe Balbi
2014-04-28 17:54           ` Felipe Balbi
2014-04-28 17:57           ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 04/20] usb: phy: msm: Enable deferred driver probing Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 05/20] usb: phy: msm: Migrate to Managed Device Resource allocation Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 06/20] usb: phy: msm: Remove unnecessarily check for valid regulators Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 07/20] usb: phy: msm: Fix checkpatch.pl warnings Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 08/20] usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 09/20] usb: phy: msm: Remove unused pclk_src_name Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 10/20] usb: phy: msm: Remove HSUSB prefix from regulator names Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 11/20] usb: phy: msm: Properly check result from platform_get_irq() Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 13/20] usb: phy: msm: Use reset framework for LINK and PHY resets Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 14/20] usb: phy: msm: Add support for secondary PHY control Ivan T. Ivanov
2014-04-30 16:22   ` Felipe Balbi
2014-04-30 16:22     ` Felipe Balbi
2014-04-28 13:34 ` [PATCH v8 15/20] usb: phy: msm: Correct USB PHY Reset sequence for newer platform Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 16/20] usb: phy: msm: Fix PTS definitions for MSM USB controller Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 17/20] usb: phy: msm: Select secondary PHY via TCSR Ivan T. Ivanov
2014-04-30 16:23   ` Felipe Balbi
2014-04-30 16:23     ` Felipe Balbi
2014-05-03  6:45   ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 18/20] usb: phy: msm: Handle disconnect events Ivan T. Ivanov
     [not found] ` <1398692063-11372-1-git-send-email-iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
2014-04-28 13:34   ` [PATCH v8 03/20] usb: phy: msm: Move global regulators variables to driver state Ivan T. Ivanov
2014-04-28 13:34     ` Ivan T. Ivanov
2014-04-28 13:34   ` [PATCH v8 12/20] usb: phy: msm: Add device tree support and binding information Ivan T. Ivanov
2014-04-28 13:34     ` Ivan T. Ivanov
2014-04-28 13:34   ` [PATCH v8 19/20] usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX Ivan T. Ivanov
2014-04-28 13:34     ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 20/20] usb: phy: msm: Use usb_add_phy_dev() to register device Ivan T. Ivanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1398692063-11372-2-git-send-email-iivanov@mm-sol.com \
    --to=iivanov@mm-sol.com \
    --cc=balbi@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.