All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michal Kazior <michal.kazior@tieto.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Michal Kazior <michal.kazior@tieto.com>
Subject: [PATCH v2 1/3] ath10k: create a chip revision whielist
Date: Mon,  1 Dec 2014 08:17:44 +0100	[thread overview]
Message-ID: <1417418266-21974-1-git-send-email-michal.kazior@tieto.com> (raw)
In-Reply-To: <1416838646-18801-1-git-send-email-michal.kazior@tieto.com>

This will make it easier to extend and maintain
list of supported hardware.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---

Notes:
    v2:
     * create a separate chip_id whitelist array
       instead of using hw_params as discussed [Kalle]

 drivers/net/wireless/ath/ath10k/core.c | 37 ----------------------------------
 drivers/net/wireless/ath/ath10k/core.h |  1 -
 drivers/net/wireless/ath/ath10k/pci.c  | 31 ++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/pci.h  |  5 +++++
 4 files changed, 36 insertions(+), 38 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 7762061..ece8ab4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1068,34 +1068,6 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
 	return 0;
 }
 
-static int ath10k_core_check_chip_id(struct ath10k *ar)
-{
-	u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV);
-
-	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n",
-		   ar->chip_id, hw_revision);
-
-	/* Check that we are not using hw1.0 (some of them have same pci id
-	 * as hw2.0) before doing anything else as ath10k crashes horribly
-	 * due to missing hw1.0 workarounds. */
-	switch (hw_revision) {
-	case QCA988X_HW_1_0_CHIP_ID_REV:
-		ath10k_err(ar, "ERROR: qca988x hw1.0 is not supported\n");
-		return -EOPNOTSUPP;
-
-	case QCA988X_HW_2_0_CHIP_ID_REV:
-		/* known hardware revision, continue normally */
-		return 0;
-
-	default:
-		ath10k_warn(ar, "Warning: hardware revision unknown (0x%x), expect problems\n",
-			    ar->chip_id);
-		return 0;
-	}
-
-	return 0;
-}
-
 static void ath10k_core_register_work(struct work_struct *work)
 {
 	struct ath10k *ar = container_of(work, struct ath10k, register_work);
@@ -1143,16 +1115,7 @@ err:
 
 int ath10k_core_register(struct ath10k *ar, u32 chip_id)
 {
-	int status;
-
 	ar->chip_id = chip_id;
-
-	status = ath10k_core_check_chip_id(ar);
-	if (status) {
-		ath10k_err(ar, "Unsupported chip id 0x%08x\n", ar->chip_id);
-		return status;
-	}
-
 	queue_work(ar->workqueue, &ar->register_work);
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 4a29498..88e6c74 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -479,7 +479,6 @@ struct ath10k {
 		u32 id;
 		const char *name;
 		u32 patch_load_addr;
-
 		struct ath10k_hw_params_fw {
 			const char *dir;
 			const char *fw;
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 0816098..e55292f 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -64,6 +64,14 @@ static const struct pci_device_id ath10k_pci_id_table[] = {
 	{0}
 };
 
+static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
+	/* QCA988X pre 2.0 chips are not supported because they need some nasty
+	 * hacks. ath10k doesn't have them and these devices crash horribly
+	 * because of that.
+	 */
+	{ QCA988X_2_0_DEVICE_ID, QCA988X_HW_2_0_CHIP_ID_REV },
+};
+
 static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
 static int ath10k_pci_cold_reset(struct ath10k *ar);
 static int ath10k_pci_warm_reset(struct ath10k *ar);
@@ -2467,6 +2475,23 @@ static void ath10k_pci_release(struct ath10k *ar)
 	pci_disable_device(pdev);
 }
 
+static bool ath10k_pci_chip_is_supported(u32 dev_id, u32 chip_id)
+{
+	const struct ath10k_pci_supp_chip *supp_chip;
+	int i;
+	u32 rev_id = MS(chip_id, SOC_CHIP_ID_REV);
+
+	for (i = 0; i < ARRAY_SIZE(ath10k_pci_supp_chips); i++) {
+		supp_chip = &ath10k_pci_supp_chips[i];
+
+		if (supp_chip->dev_id == dev_id &&
+		    supp_chip->rev_id == rev_id)
+			return true;
+	}
+
+	return false;
+}
+
 static int ath10k_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *pci_dev)
 {
@@ -2512,6 +2537,12 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_sleep;
 	}
 
+	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
+		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+			   pdev->device, chip_id);
+		goto err_sleep;
+	}
+
 	ret = ath10k_pci_alloc_pipes(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index cf36511..ce4a1ef 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -152,6 +152,11 @@ struct ath10k_pci_pipe {
 	struct tasklet_struct intr;
 };
 
+struct ath10k_pci_supp_chip {
+	u32 dev_id;
+	u32 rev_id;
+};
+
 struct ath10k_pci {
 	struct pci_dev *pdev;
 	struct device *dev;
-- 
1.8.5.3


WARNING: multiple messages have this Message-ID (diff)
From: Michal Kazior <michal.kazior@tieto.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Michal Kazior <michal.kazior@tieto.com>
Subject: [PATCH v2 1/3] ath10k: create a chip revision whielist
Date: Mon,  1 Dec 2014 08:17:44 +0100	[thread overview]
Message-ID: <1417418266-21974-1-git-send-email-michal.kazior@tieto.com> (raw)
In-Reply-To: <1416838646-18801-1-git-send-email-michal.kazior@tieto.com>

This will make it easier to extend and maintain
list of supported hardware.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---

Notes:
    v2:
     * create a separate chip_id whitelist array
       instead of using hw_params as discussed [Kalle]

 drivers/net/wireless/ath/ath10k/core.c | 37 ----------------------------------
 drivers/net/wireless/ath/ath10k/core.h |  1 -
 drivers/net/wireless/ath/ath10k/pci.c  | 31 ++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/pci.h  |  5 +++++
 4 files changed, 36 insertions(+), 38 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 7762061..ece8ab4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1068,34 +1068,6 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
 	return 0;
 }
 
-static int ath10k_core_check_chip_id(struct ath10k *ar)
-{
-	u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV);
-
-	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n",
-		   ar->chip_id, hw_revision);
-
-	/* Check that we are not using hw1.0 (some of them have same pci id
-	 * as hw2.0) before doing anything else as ath10k crashes horribly
-	 * due to missing hw1.0 workarounds. */
-	switch (hw_revision) {
-	case QCA988X_HW_1_0_CHIP_ID_REV:
-		ath10k_err(ar, "ERROR: qca988x hw1.0 is not supported\n");
-		return -EOPNOTSUPP;
-
-	case QCA988X_HW_2_0_CHIP_ID_REV:
-		/* known hardware revision, continue normally */
-		return 0;
-
-	default:
-		ath10k_warn(ar, "Warning: hardware revision unknown (0x%x), expect problems\n",
-			    ar->chip_id);
-		return 0;
-	}
-
-	return 0;
-}
-
 static void ath10k_core_register_work(struct work_struct *work)
 {
 	struct ath10k *ar = container_of(work, struct ath10k, register_work);
@@ -1143,16 +1115,7 @@ err:
 
 int ath10k_core_register(struct ath10k *ar, u32 chip_id)
 {
-	int status;
-
 	ar->chip_id = chip_id;
-
-	status = ath10k_core_check_chip_id(ar);
-	if (status) {
-		ath10k_err(ar, "Unsupported chip id 0x%08x\n", ar->chip_id);
-		return status;
-	}
-
 	queue_work(ar->workqueue, &ar->register_work);
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 4a29498..88e6c74 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -479,7 +479,6 @@ struct ath10k {
 		u32 id;
 		const char *name;
 		u32 patch_load_addr;
-
 		struct ath10k_hw_params_fw {
 			const char *dir;
 			const char *fw;
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 0816098..e55292f 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -64,6 +64,14 @@ static const struct pci_device_id ath10k_pci_id_table[] = {
 	{0}
 };
 
+static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
+	/* QCA988X pre 2.0 chips are not supported because they need some nasty
+	 * hacks. ath10k doesn't have them and these devices crash horribly
+	 * because of that.
+	 */
+	{ QCA988X_2_0_DEVICE_ID, QCA988X_HW_2_0_CHIP_ID_REV },
+};
+
 static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
 static int ath10k_pci_cold_reset(struct ath10k *ar);
 static int ath10k_pci_warm_reset(struct ath10k *ar);
@@ -2467,6 +2475,23 @@ static void ath10k_pci_release(struct ath10k *ar)
 	pci_disable_device(pdev);
 }
 
+static bool ath10k_pci_chip_is_supported(u32 dev_id, u32 chip_id)
+{
+	const struct ath10k_pci_supp_chip *supp_chip;
+	int i;
+	u32 rev_id = MS(chip_id, SOC_CHIP_ID_REV);
+
+	for (i = 0; i < ARRAY_SIZE(ath10k_pci_supp_chips); i++) {
+		supp_chip = &ath10k_pci_supp_chips[i];
+
+		if (supp_chip->dev_id == dev_id &&
+		    supp_chip->rev_id == rev_id)
+			return true;
+	}
+
+	return false;
+}
+
 static int ath10k_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *pci_dev)
 {
@@ -2512,6 +2537,12 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_sleep;
 	}
 
+	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
+		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+			   pdev->device, chip_id);
+		goto err_sleep;
+	}
+
 	ret = ath10k_pci_alloc_pipes(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index cf36511..ce4a1ef 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -152,6 +152,11 @@ struct ath10k_pci_pipe {
 	struct tasklet_struct intr;
 };
 
+struct ath10k_pci_supp_chip {
+	u32 dev_id;
+	u32 rev_id;
+};
+
 struct ath10k_pci {
 	struct pci_dev *pdev;
 	struct device *dev;
-- 
1.8.5.3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2014-12-01  7:30 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-24 14:17 [PATCH 1/3] ath10k: embed supported chip ids in hw_params Michal Kazior
2014-11-24 14:17 ` Michal Kazior
2014-11-24 14:17 ` [PATCH 2/3] ath10k: put board size into hw_params Michal Kazior
2014-11-24 14:17   ` Michal Kazior
2014-11-24 14:17 ` [PATCH 3/3] ath10k: move uart pin config " Michal Kazior
2014-11-24 14:17   ` Michal Kazior
2014-11-26  7:21 ` [PATCH 1/3] ath10k: embed supported chip ids in hw_params Kalle Valo
2014-11-26  7:21   ` Kalle Valo
2014-11-26  7:54   ` Michal Kazior
2014-11-26  7:54     ` Michal Kazior
2014-11-27  7:30     ` Kalle Valo
2014-11-27  7:30       ` Kalle Valo
2014-11-27  7:45       ` Michal Kazior
2014-11-27  7:45         ` Michal Kazior
2014-11-28  7:02         ` Kalle Valo
2014-11-28  7:02           ` Kalle Valo
2014-11-28  7:10     ` Kalle Valo
2014-11-28  7:10       ` Kalle Valo
2014-11-28 11:25       ` Michal Kazior
2014-11-28 11:25         ` Michal Kazior
2014-12-01  7:17 ` Michal Kazior [this message]
2014-12-01  7:17   ` [PATCH v2 1/3] ath10k: create a chip revision whielist Michal Kazior
2014-12-01  7:17   ` [PATCH v2 2/3] ath10k: put board size into hw_params Michal Kazior
2014-12-01  7:17     ` Michal Kazior
2014-12-01  7:17   ` [PATCH v2 3/3] ath10k: move uart pin config " Michal Kazior
2014-12-01  7:17     ` Michal Kazior
2014-12-01  7:47   ` [PATCH v2 1/3] ath10k: create a chip revision whielist Kalle Valo
2014-12-01  7:47     ` Kalle Valo
2014-12-01  8:35     ` Michal Kazior
2014-12-01  8:35       ` Michal Kazior
2014-12-08 15:35   ` Kalle Valo
2014-12-08 15:35     ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1417418266-21974-1-git-send-email-michal.kazior@tieto.com \
    --to=michal.kazior@tieto.com \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.