From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Subject: [PATCH v2 6/8] ath10k: add support to send addba request Date: Wed, 24 Dec 2014 13:29:07 +0530 [thread overview] Message-ID: <1419407949-32367-7-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1419407949-32367-1-git-send-email-rmanohar@qti.qualcomm.com> This per-station debugfs entry helps to send addba request in manual mode. Need to pass two configuration parameters (tid, buffer size) as input. To send addba, echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/addba Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/debugfs_sta.c | 56 +++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c index d5fca70..89e5e5a 100644 --- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c +++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c @@ -81,9 +81,65 @@ static const struct file_operations fops_aggr_mode = { .llseek = default_llseek, }; +static ssize_t ath10k_dbg_sta_write_addba(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ieee80211_sta *sta = file->private_data; + struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; + struct ath10k *ar = arsta->arvif->ar; + u32 tid, buf_size; + int ret; + char buf[64]; + + simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count); + + /* make sure that buf is null terminated */ + buf[sizeof(buf) - 1] = '\0'; + + ret = sscanf(buf, "%u %u", &tid, &buf_size); + if (ret != 2) { + ath10k_warn(ar, "ex: echo <tid> <buffer size> >addba\n"); + return -EINVAL; + } + + /* Valid TID values are 0 through 15 */ + if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) { + ath10k_warn(ar, "Invalid TID %u\n", tid); + return -EINVAL; + } + + mutex_lock(&ar->conf_mutex); + if ((ar->state != ATH10K_STATE_ON) || + (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) { + ret = count; + goto out; + } + + ret = ath10k_wmi_addba_send(ar, arsta->arvif->vdev_id, sta->addr, + tid, buf_size); + if (ret) { + ath10k_warn(ar, "failed to send addba request: vdev_id %u peer %pM tid %u buf_size %u\n", + arsta->arvif->vdev_id, sta->addr, tid, buf_size); + } + + ret = count; +out: + mutex_unlock(&ar->conf_mutex); + return ret; +} + +static const struct file_operations fops_addba = { + .write = ath10k_dbg_sta_write_addba, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct dentry *dir) { debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta, &fops_aggr_mode); + debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba); } -- 2.2.1
WARNING: multiple messages have this Message-ID (diff)
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Subject: [PATCH v2 6/8] ath10k: add support to send addba request Date: Wed, 24 Dec 2014 13:29:07 +0530 [thread overview] Message-ID: <1419407949-32367-7-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1419407949-32367-1-git-send-email-rmanohar@qti.qualcomm.com> This per-station debugfs entry helps to send addba request in manual mode. Need to pass two configuration parameters (tid, buffer size) as input. To send addba, echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/addba Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/debugfs_sta.c | 56 +++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c index d5fca70..89e5e5a 100644 --- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c +++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c @@ -81,9 +81,65 @@ static const struct file_operations fops_aggr_mode = { .llseek = default_llseek, }; +static ssize_t ath10k_dbg_sta_write_addba(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ieee80211_sta *sta = file->private_data; + struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; + struct ath10k *ar = arsta->arvif->ar; + u32 tid, buf_size; + int ret; + char buf[64]; + + simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count); + + /* make sure that buf is null terminated */ + buf[sizeof(buf) - 1] = '\0'; + + ret = sscanf(buf, "%u %u", &tid, &buf_size); + if (ret != 2) { + ath10k_warn(ar, "ex: echo <tid> <buffer size> >addba\n"); + return -EINVAL; + } + + /* Valid TID values are 0 through 15 */ + if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) { + ath10k_warn(ar, "Invalid TID %u\n", tid); + return -EINVAL; + } + + mutex_lock(&ar->conf_mutex); + if ((ar->state != ATH10K_STATE_ON) || + (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) { + ret = count; + goto out; + } + + ret = ath10k_wmi_addba_send(ar, arsta->arvif->vdev_id, sta->addr, + tid, buf_size); + if (ret) { + ath10k_warn(ar, "failed to send addba request: vdev_id %u peer %pM tid %u buf_size %u\n", + arsta->arvif->vdev_id, sta->addr, tid, buf_size); + } + + ret = count; +out: + mutex_unlock(&ar->conf_mutex); + return ret; +} + +static const struct file_operations fops_addba = { + .write = ath10k_dbg_sta_write_addba, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct dentry *dir) { debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta, &fops_aggr_mode); + debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba); } -- 2.2.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-12-24 8:00 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-12-24 7:59 [PATCH v2 0/8] ath10k: add per station debugfs support Rajkumar Manoharan 2014-12-24 7:59 ` Rajkumar Manoharan 2014-12-24 7:59 ` [PATCH v2 1/8] ath10k: add wmi support for addba_clear_resp Rajkumar Manoharan 2014-12-24 7:59 ` Rajkumar Manoharan 2014-12-24 7:59 ` [PATCH v2 2/8] ath10k: add wmi support for addba_send Rajkumar Manoharan 2014-12-24 7:59 ` Rajkumar Manoharan 2014-12-24 7:59 ` [PATCH v2 3/8] ath10k: add wmi support for addba_set_resp Rajkumar Manoharan 2014-12-24 7:59 ` Rajkumar Manoharan 2014-12-24 7:59 ` [PATCH v2 4/8] ath10k: add wmi support for delba_send Rajkumar Manoharan 2014-12-24 7:59 ` Rajkumar Manoharan 2014-12-24 7:59 ` [PATCH v2 5/8] ath10k: Implement sta_add_debugfs Rajkumar Manoharan 2014-12-24 7:59 ` Rajkumar Manoharan 2015-01-12 11:37 ` Kalle Valo 2015-01-12 11:37 ` Kalle Valo 2014-12-24 7:59 ` Rajkumar Manoharan [this message] 2014-12-24 7:59 ` [PATCH v2 6/8] ath10k: add support to send addba request Rajkumar Manoharan 2015-01-12 11:42 ` Kalle Valo 2015-01-12 11:42 ` Kalle Valo 2014-12-24 7:59 ` [PATCH v2 7/8] ath10k: add support to send addba response Rajkumar Manoharan 2014-12-24 7:59 ` Rajkumar Manoharan 2015-01-12 11:43 ` Kalle Valo 2015-01-12 11:43 ` Kalle Valo 2014-12-24 7:59 ` [PATCH v2 8/8] ath10k: add support to send delba Rajkumar Manoharan 2014-12-24 7:59 ` Rajkumar Manoharan 2015-01-12 11:45 ` Kalle Valo 2015-01-12 11:45 ` Kalle Valo 2015-01-13 14:15 ` [PATCH v2 0/8] ath10k: add per station debugfs support Kalle Valo 2015-01-13 14:15 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1419407949-32367-7-git-send-email-rmanohar@qti.qualcomm.com \ --to=rmanohar@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.