All of lore.kernel.org
 help / color / mirror / Atom feed
From: yang.a.fang@intel.com
To: broonie@kernel.org, lgirdwood@gmail.com
Cc: alsa-devel@alsa-project.org, denny.iriawan@intel.com,
	harshapriya.n@intel.com, praveen.k.jain@intel.com,
	kevin.strasser@intel.com, vinod.koul@intel.com, "Fang,
	Yang A" <yang.a.fang@intel.com>,
	kevin.strasser@linux.intel.com, mengdong.lin@intel.com,
	bardliao@realtek.com
Subject: [PATCH v4 2/2] ASoC: Intel:Add Cherrytrail & Braswell machine driver cht_bsw_rt5645
Date: Wed,  4 Feb 2015 18:19:32 -0800	[thread overview]
Message-ID: <1423102772-11426-2-git-send-email-yang.a.fang@intel.com> (raw)
In-Reply-To: <1423102772-11426-1-git-send-email-yang.a.fang@intel.com>

From: "Fang, Yang A" <yang.a.fang@intel.com>

Add machine driver for two Intel Cherryview-based platforms, Cherrytrail
and Braswell, with RT5645 codec

Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Kevin Strasser <kevin.strasser@linux.intel.com>
---
 sound/soc/intel/Kconfig          |   11 ++
 sound/soc/intel/Makefile         |    2 +
 sound/soc/intel/cht_bsw_rt5645.c |  327 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 340 insertions(+)
 create mode 100644 sound/soc/intel/cht_bsw_rt5645.c

diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index f06fcf1..12093fd 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -110,3 +110,14 @@ config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
           platforms with RT5672 audio codec.
           Say Y if you have such a device
           If unsure select "N".
+
+config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
+	tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645 codec"
+	depends on X86_INTEL_LPSS
+	select SND_SOC_RT5645
+	select SND_SST_MFLD_PLATFORM
+	select SND_SST_IPC_ACPI
+	help
+	  This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
+	  platforms with RT5645 audio codec.
+	  If unsure select "N".
diff --git a/sound/soc/intel/Makefile b/sound/soc/intel/Makefile
index e928ec3..a8e53c4 100644
--- a/sound/soc/intel/Makefile
+++ b/sound/soc/intel/Makefile
@@ -28,6 +28,7 @@ snd-soc-sst-byt-max98090-mach-objs := byt-max98090.o
 snd-soc-sst-broadwell-objs := broadwell.o
 snd-soc-sst-bytcr-dpcm-rt5640-objs := bytcr_dpcm_rt5640.o
 snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
+snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o
 
 obj-$(CONFIG_SND_SOC_INTEL_HASWELL_MACH) += snd-soc-sst-haswell.o
 obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o
@@ -35,6 +36,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o
 obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o
 obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-dpcm-rt5640.o
 obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o
+obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o
 
 # DSP driver
 obj-$(CONFIG_SND_SST_IPC) += sst/
diff --git a/sound/soc/intel/cht_bsw_rt5645.c b/sound/soc/intel/cht_bsw_rt5645.c
new file mode 100644
index 0000000..b6f8377
--- /dev/null
+++ b/sound/soc/intel/cht_bsw_rt5645.c
@@ -0,0 +1,327 @@
+/*
+ *  cht-bsw-rt5645.c - ASoc Machine driver for Intel Cherryview-based platforms
+ *                     Cherrytrail and Braswell, with RT5645 codec.
+ *
+ *  Copyright (C) 2015 Intel Corp
+ *  Author: Fang, Yang A <yang.a.fang@intel.com>
+ *	        N,Harshapriya <harshapriya.n@intel.com>
+ *  This file is modified from cht_bsw_rt5672.c
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include "../codecs/rt5645.h"
+#include "sst-atom-controls.h"
+
+#define CHT_PLAT_CLK_3_HZ	19200000
+#define CHT_CODEC_DAI	"rt5645-aif1"
+
+struct cht_mc_private {
+	struct snd_soc_jack hp_jack;
+	struct snd_soc_jack mic_jack;
+};
+
+static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card)
+{
+	int i;
+
+	for (i = 0; i < card->num_rtd; i++) {
+		struct snd_soc_pcm_runtime *rtd;
+
+		rtd = card->rtd + i;
+		if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI,
+			     strlen(CHT_CODEC_DAI)))
+			return rtd->codec_dai;
+	}
+	return NULL;
+}
+
+static int platform_clock_control(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *k, int  event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct snd_soc_card *card = dapm->card;
+	struct snd_soc_dai *codec_dai;
+	int ret;
+
+	codec_dai = cht_get_codec_dai(card);
+	if (!codec_dai) {
+		dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n");
+		return -EIO;
+	}
+
+	if (!SND_SOC_DAPM_EVENT_OFF(event))
+		return 0;
+
+	/* Set codec sysclk source to its internal clock because codec PLL will
+	 * be off when idle and MCLK will also be off by ACPI when codec is
+	 * runtime suspended. Codec needs clock for jack detection and button
+	 * press.
+	 */
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_RCCLK,
+			0, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget cht_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Int Mic", NULL),
+	SND_SOC_DAPM_SPK("Ext Spk", NULL),
+	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
+			platform_clock_control, SND_SOC_DAPM_POST_PMD),
+};
+
+static const struct snd_soc_dapm_route cht_audio_map[] = {
+	{"IN1P", NULL, "Headset Mic"},
+	{"IN1N", NULL, "Headset Mic"},
+	{"DMIC L1", NULL, "Int Mic"},
+	{"DMIC R1", NULL, "Int Mic"},
+	{"Headphone", NULL, "HPOL"},
+	{"Headphone", NULL, "HPOR"},
+	{"Ext Spk", NULL, "SPOL"},
+	{"Ext Spk", NULL, "SPOR"},
+	{"AIF1 Playback", NULL, "ssp2 Tx"},
+	{"ssp2 Tx", NULL, "codec_out0"},
+	{"ssp2 Tx", NULL, "codec_out1"},
+	{"codec_in0", NULL, "ssp2 Rx" },
+	{"codec_in1", NULL, "ssp2 Rx" },
+	{"ssp2 Rx", NULL, "AIF1 Capture"},
+	{"Headphone", NULL, "Platform Clock"},
+	{"Headset Mic", NULL, "Platform Clock"},
+	{"Int Mic", NULL, "Platform Clock"},
+	{"Ext Spk", NULL, "Platform Clock"},
+};
+
+static const struct snd_kcontrol_new cht_mc_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Int Mic"),
+	SOC_DAPM_PIN_SWITCH("Ext Spk"),
+};
+
+static int cht_aif1_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int ret;
+
+	/* set codec PLL source to the 19.2MHz platform clock (MCLK) */
+	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5645_PLL1_S_MCLK,
+				  CHT_PLAT_CLK_3_HZ, params_rate(params) * 512);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_PLL1,
+				params_rate(params) * 512, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec sysclk: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
+{
+	int ret;
+	struct snd_soc_codec *codec = runtime->codec;
+	struct snd_soc_dai *codec_dai = runtime->codec_dai;
+	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
+
+	/* Select clk_i2s1_asrc as ASRC clock source */
+	rt5645_sel_asrc_clk_src(codec,
+				RT5645_DA_STEREO_FILTER |
+				RT5645_DA_MONO_L_FILTER |
+				RT5645_DA_MONO_R_FILTER |
+				RT5645_AD_STEREO_FILTER,
+				RT5645_CLK_SEL_I2S1_ASRC);
+
+	/* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
+	ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0xF, 4, 24);
+	if (ret < 0) {
+		dev_err(runtime->dev, "can't set codec TDM slot %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_jack_new(codec, "Headphone Jack",
+				SND_JACK_HEADPHONE,
+				&ctx->hp_jack);
+	if (ret) {
+		dev_err(runtime->dev, "HP jack creation failed %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_jack_new(codec, "Mic Jack",
+				SND_JACK_MICROPHONE,
+				&ctx->mic_jack);
+	if (ret) {
+		dev_err(runtime->dev, "Mic jack creation failed %d\n", ret);
+		return ret;
+	}
+
+	rt5645_set_jack_detect(codec, &ctx->hp_jack, &ctx->mic_jack);
+
+	return ret;
+}
+
+static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_interval *rate = hw_param_interval(params,
+			SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *channels = hw_param_interval(params,
+						SNDRV_PCM_HW_PARAM_CHANNELS);
+
+	/* The DSP will covert the FE rate to 48k, stereo, 24bits */
+	rate->min = rate->max = 48000;
+	channels->min = channels->max = 2;
+
+	/* set SSP2 to 24-bit */
+	snd_mask_set(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT -
+				    SNDRV_PCM_HW_PARAM_FIRST_MASK],
+				    SNDRV_PCM_FORMAT_S24_LE);
+	return 0;
+}
+
+static unsigned int rates_48000[] = {
+	48000,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_48000 = {
+	.count = ARRAY_SIZE(rates_48000),
+	.list  = rates_48000,
+};
+
+static int cht_aif1_startup(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_hw_constraint_list(substream->runtime, 0,
+			SNDRV_PCM_HW_PARAM_RATE,
+			&constraints_48000);
+}
+
+static struct snd_soc_ops cht_aif1_ops = {
+	.startup = cht_aif1_startup,
+};
+
+static struct snd_soc_ops cht_be_ssp2_ops = {
+	.hw_params = cht_aif1_hw_params,
+};
+
+static struct snd_soc_dai_link cht_dailink[] = {
+	[MERR_DPCM_AUDIO] = {
+		.name = "Audio Port",
+		.stream_name = "Audio",
+		.cpu_dai_name = "media-cpu-dai",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.codec_name = "snd-soc-dummy",
+		.platform_name = "sst-mfld-platform",
+		.ignore_suspend = 1,
+		.dynamic = 1,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.ops = &cht_aif1_ops,
+	},
+	[MERR_DPCM_COMPR] = {
+		.name = "Compressed Port",
+		.stream_name = "Compress",
+		.cpu_dai_name = "compress-cpu-dai",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.codec_name = "snd-soc-dummy",
+		.platform_name = "sst-mfld-platform",
+	},
+	/* CODEC<->CODEC link */
+	/* back ends */
+	{
+		.name = "SSP2-Codec",
+		.be_id = 1,
+		.cpu_dai_name = "ssp2-port",
+		.platform_name = "sst-mfld-platform",
+		.no_pcm = 1,
+		.codec_dai_name = "rt5645-aif1",
+		.codec_name = "i2c-10EC5645:00",
+		.dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF
+					| SND_SOC_DAIFMT_CBS_CFS,
+		.init = cht_codec_init,
+		.be_hw_params_fixup = cht_codec_fixup,
+		.ignore_suspend = 1,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.ops = &cht_be_ssp2_ops,
+	},
+};
+
+/* SoC card */
+static struct snd_soc_card snd_soc_card_cht = {
+	.name = "chtrt5645",
+	.dai_link = cht_dailink,
+	.num_links = ARRAY_SIZE(cht_dailink),
+	.dapm_widgets = cht_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(cht_dapm_widgets),
+	.dapm_routes = cht_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(cht_audio_map),
+	.controls = cht_mc_controls,
+	.num_controls = ARRAY_SIZE(cht_mc_controls),
+};
+
+static int snd_cht_mc_probe(struct platform_device *pdev)
+{
+	int ret_val = 0;
+	struct cht_mc_private *drv;
+
+	drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_ATOMIC);
+	if (!drv)
+		return -ENOMEM;
+
+	snd_soc_card_cht.dev = &pdev->dev;
+	snd_soc_card_set_drvdata(&snd_soc_card_cht, drv);
+	ret_val = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_cht);
+	if (ret_val) {
+		dev_err(&pdev->dev,
+			"snd_soc_register_card failed %d\n", ret_val);
+		return ret_val;
+	}
+	platform_set_drvdata(pdev, &snd_soc_card_cht);
+	return ret_val;
+}
+
+static struct platform_driver snd_cht_mc_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "cht-bsw-rt5645",
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = snd_cht_mc_probe,
+};
+
+module_platform_driver(snd_cht_mc_driver)
+
+MODULE_DESCRIPTION("ASoC Intel(R) Braswell Machine driver");
+MODULE_AUTHOR("Fang, Yang A,N,Harshapriya");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:cht-bsw-rt5645");
-- 
1.7.9.5

  reply	other threads:[~2015-02-05  2:19 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-31 23:22 [PATCH 1/2] ASoC: Intel:Add Cherrytrail & Braswell machine driver cht_bsw_rt5645 yang.a.fang
2015-01-31 23:22 ` [PATCH 2/2] ASoC: Intel:Add support rt5645 in sst driver yang.a.fang
2015-02-02 19:05   ` Mark Brown
2015-02-02 19:05 ` [PATCH 1/2] ASoC: Intel:Add Cherrytrail & Braswell machine driver cht_bsw_rt5645 Mark Brown
2015-02-03 19:25 ` [PATCH v2 1/2] ASoC: rt5645: add API to select ASRC clock source yang.a.fang
2015-02-03 19:25   ` [PATCH v2 2/2] ASoC: Intel:Add Cherrytrail & Braswell machine driver cht_bsw_rt5645 yang.a.fang
2015-02-03 19:49     ` Vinod Koul
2015-02-03 20:03     ` [PATCH v3 1/2] ASoC: rt5645: add API to select ASRC clock source yang.a.fang
2015-02-03 20:03       ` [PATCH v3 2/2] ASoC: Intel:Add Cherrytrail & Braswell machine driver cht_bsw_rt5645 yang.a.fang
2015-02-04  1:29         ` Vinod Koul
2015-02-04 20:31       ` [PATCH v3 1/2] ASoC: rt5645: add API to select ASRC clock source Mark Brown
2015-02-05  2:19       ` [PATCH v4 " yang.a.fang
2015-02-05  2:19         ` yang.a.fang [this message]
2015-02-05 18:10         ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1423102772-11426-2-git-send-email-yang.a.fang@intel.com \
    --to=yang.a.fang@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bardliao@realtek.com \
    --cc=broonie@kernel.org \
    --cc=denny.iriawan@intel.com \
    --cc=harshapriya.n@intel.com \
    --cc=kevin.strasser@intel.com \
    --cc=kevin.strasser@linux.intel.com \
    --cc=lgirdwood@gmail.com \
    --cc=mengdong.lin@intel.com \
    --cc=praveen.k.jain@intel.com \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.