From: <Frank.Li@freescale.com>
To: <lznuaa@gmail.com>, <shawn.guo@linaro.org>,
<dmitry.torokhov@gmail.com>, <robh+dt@kernel.org>,
<a.zummo@towertech.it>, <p.zabel@pengutronix.de>,
<alexandre.belloni@free-electrons.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-input@vger.kernel.org>, <rtc-linux@googlegroups.com>,
<linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>,
Frank Li <Frank.Li@freescale.com>
Subject: [rtc-linux] [PATCH v2 4/7] arm: dts: imx: update snvs to use syscon access register
Date: Wed, 20 May 2015 01:04:39 +0800 [thread overview]
Message-ID: <1432055082-28983-5-git-send-email-Frank.Li@freescale.com> (raw)
In-Reply-To: <1432055082-28983-1-git-send-email-Frank.Li@freescale.com>
From: Frank Li <Frank.Li@freescale.com>
snvs is MFP device. Change dts to use syscon to allocate register resource.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++--------
arch/arm/boot/dts/imx6sl.dtsi | 12 ++++--------
arch/arm/boot/dts/imx6sx.dtsi | 12 ++++--------
arch/arm/boot/dts/vfxxx.dtsi | 9 +++------
4 files changed, 15 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 0482a66..9df9faf 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -687,21 +687,17 @@
};
snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index a78e715..99f37f9 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -564,21 +564,17 @@
};
snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 708175d..97de407 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -662,20 +662,16 @@
};
snvs: snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa3351..fccfc01 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -404,14 +404,11 @@
};
snvs0: snvs@400a7000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x400a7000 0x2000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x400a7000 0x2000>;
- snvsrtc: snvs-rtc-lp@34 {
+ snvsrtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SNVS>;
clock-names = "snvs-rtc";
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: <Frank.Li@freescale.com>
To: lznuaa@gmail.com, shawn.guo@linaro.org,
dmitry.torokhov@gmail.com, robh+dt@kernel.org,
a.zummo@towertech.it, p.zabel@pengutronix.de,
alexandre.belloni@free-electrons.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-input@vger.kernel.org, rtc-linux@googlegroups.com,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
Frank Li <Frank.Li@freescale.com>
Subject: [PATCH v2 4/7] arm: dts: imx: update snvs to use syscon access register
Date: Wed, 20 May 2015 01:04:39 +0800 [thread overview]
Message-ID: <1432055082-28983-5-git-send-email-Frank.Li@freescale.com> (raw)
In-Reply-To: <1432055082-28983-1-git-send-email-Frank.Li@freescale.com>
From: Frank Li <Frank.Li@freescale.com>
snvs is MFP device. Change dts to use syscon to allocate register resource.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++--------
arch/arm/boot/dts/imx6sl.dtsi | 12 ++++--------
arch/arm/boot/dts/imx6sx.dtsi | 12 ++++--------
arch/arm/boot/dts/vfxxx.dtsi | 9 +++------
4 files changed, 15 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 0482a66..9df9faf 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -687,21 +687,17 @@
};
snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index a78e715..99f37f9 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -564,21 +564,17 @@
};
snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 708175d..97de407 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -662,20 +662,16 @@
};
snvs: snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa3351..fccfc01 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -404,14 +404,11 @@
};
snvs0: snvs@400a7000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x400a7000 0x2000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x400a7000 0x2000>;
- snvsrtc: snvs-rtc-lp@34 {
+ snvsrtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SNVS>;
clock-names = "snvs-rtc";
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Frank.Li@freescale.com (Frank.Li at freescale.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/7] arm: dts: imx: update snvs to use syscon access register
Date: Wed, 20 May 2015 01:04:39 +0800 [thread overview]
Message-ID: <1432055082-28983-5-git-send-email-Frank.Li@freescale.com> (raw)
In-Reply-To: <1432055082-28983-1-git-send-email-Frank.Li@freescale.com>
From: Frank Li <Frank.Li@freescale.com>
snvs is MFP device. Change dts to use syscon to allocate register resource.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++--------
arch/arm/boot/dts/imx6sl.dtsi | 12 ++++--------
arch/arm/boot/dts/imx6sx.dtsi | 12 ++++--------
arch/arm/boot/dts/vfxxx.dtsi | 9 +++------
4 files changed, 15 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 0482a66..9df9faf 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -687,21 +687,17 @@
};
snvs at 020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp at 34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff at 38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index a78e715..99f37f9 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -564,21 +564,17 @@
};
snvs at 020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp at 34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff at 38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 708175d..97de407 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -662,20 +662,16 @@
};
snvs: snvs at 020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp at 34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff at 38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa3351..fccfc01 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -404,14 +404,11 @@
};
snvs0: snvs at 400a7000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x400a7000 0x2000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x400a7000 0x2000>;
- snvsrtc: snvs-rtc-lp at 34 {
+ snvsrtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SNVS>;
clock-names = "snvs-rtc";
--
1.9.1
next prev parent reply other threads:[~2015-05-19 17:08 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-19 17:04 [rtc-linux] [PATCH v2 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver Frank.Li
2015-05-19 17:04 ` Frank.Li at freescale.com
2015-05-19 17:04 ` Frank.Li
2015-05-19 17:04 ` [rtc-linux] [PATCH v2 1/7] arm: imx: power-off: change to syscon to access register Frank.Li
2015-05-19 17:04 ` Frank.Li at freescale.com
2015-05-19 17:04 ` Frank.Li
2015-05-19 17:04 ` [rtc-linux] [PATCH v2 2/7] rtc: arm: imx: snvs: change use " Frank.Li
2015-05-19 17:04 ` Frank.Li at freescale.com
2015-05-19 17:04 ` Frank.Li-KZfg59tc24xl57MIdRCFDg
2015-05-19 20:46 ` [rtc-linux] " Alexandre Belloni
2015-05-19 20:46 ` Alexandre Belloni
2015-05-19 20:46 ` Alexandre Belloni
2015-05-19 17:04 ` [rtc-linux] [PATCH v2 3/7] Document: dt: fsl: snvs: change support syscon Frank.Li
2015-05-19 17:04 ` Frank.Li at freescale.com
2015-05-19 17:04 ` Frank.Li
2015-05-19 17:04 ` Frank.Li [this message]
2015-05-19 17:04 ` [PATCH v2 4/7] arm: dts: imx: update snvs to use syscon access register Frank.Li at freescale.com
2015-05-19 17:04 ` Frank.Li
2015-05-19 17:04 ` [rtc-linux] [PATCH v2 5/7] input: keyboard: imx: add snvs power key driver Frank.Li
2015-05-19 17:04 ` Frank.Li at freescale.com
2015-05-19 17:04 ` Frank.Li
2015-05-19 17:04 ` [rtc-linux] [PATCH v2 6/7] document: devicetree: input: imx: i.mx snvs power device tree bindings Frank.Li
2015-05-19 17:04 ` Frank.Li at freescale.com
2015-05-19 17:04 ` Frank.Li
2015-05-19 17:04 ` [rtc-linux] [PATCH v2 7/7] arm: dts: imx6sx: enable snvs power key Frank.Li
2015-05-19 17:04 ` Frank.Li at freescale.com
2015-05-19 17:04 ` Frank.Li
2015-05-20 1:58 ` [rtc-linux] Re: [PATCH v2 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver Shawn Guo
2015-05-20 1:58 ` Shawn Guo
2015-05-20 1:58 ` Shawn Guo
2015-05-20 2:44 ` [rtc-linux] " Zhi Li
2015-05-20 2:44 ` Zhi Li
2015-05-20 2:44 ` Zhi Li
2015-05-20 14:22 ` [rtc-linux] " Shawn Guo
2015-05-20 14:22 ` Shawn Guo
2015-05-20 14:22 ` Shawn Guo
2015-05-20 14:30 ` [rtc-linux] " Zhi Li
2015-05-20 14:30 ` Zhi Li
2015-05-20 14:30 ` Zhi Li
2015-05-20 14:46 ` [rtc-linux] " Joshua Clayton
2015-05-20 14:46 ` Joshua Clayton
2015-05-20 14:46 ` Joshua Clayton
2015-05-20 15:03 ` [rtc-linux] " Zhi Li
2015-05-20 15:03 ` Zhi Li
2015-05-20 15:03 ` Zhi Li
2015-05-20 18:25 ` [rtc-linux] " Russell King - ARM Linux
2015-05-20 18:25 ` Russell King - ARM Linux
2015-05-20 18:25 ` Russell King - ARM Linux
2015-05-20 18:30 ` [rtc-linux] " Russell King - ARM Linux
2015-05-20 18:30 ` Russell King - ARM Linux
2015-05-20 18:30 ` Russell King - ARM Linux
2015-05-20 18:44 ` [rtc-linux] " Zhi Li
2015-05-20 18:44 ` Zhi Li
2015-05-20 18:44 ` Zhi Li
2015-05-20 21:56 ` [rtc-linux] " Russell King - ARM Linux
2015-05-20 21:56 ` Russell King - ARM Linux
2015-05-20 21:56 ` Russell King - ARM Linux
2015-05-21 0:20 ` [rtc-linux] " Dmitry Torokhov
2015-05-21 0:20 ` Dmitry Torokhov
2015-05-21 0:20 ` Dmitry Torokhov
2015-05-21 1:16 ` [rtc-linux] " Zhi Li
2015-05-21 1:16 ` Zhi Li
2015-05-21 1:16 ` Zhi Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432055082-28983-5-git-send-email-Frank.Li@freescale.com \
--to=frank.li@freescale.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lznuaa@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.