From: kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org To: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>, Lee Jones <lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>, Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>, Jiri Slaby <jslaby-IBi9RG/b67k@public.gmane.org>, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> Subject: [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart Date: Sat, 9 Jan 2016 13:07:32 +0000 [thread overview] Message-ID: <1452344854-2576-2-git-send-email-kernel@martin.sperl.org> (raw) In-Reply-To: <1452344854-2576-1-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> From: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> Add binding documentation for the bcm2835-aux-uart driver. Signed-off-by: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> --- .../bindings/serial/brcm,bcm2835-aux-uart.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt new file mode 100644 index 0000000..2defe5c --- /dev/null +++ b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt @@ -0,0 +1,18 @@ +* BCM2835 AUXILIAR UART + +Required properties: + +- compatible: "brcm,bcm2835-aux-uart" +- reg: The base address of the UART register bank. +- interrupts: A single interrupt specifier. +- clocks: Clock driving the hardware; used to figure out the baud rate + divisor. + +Example: + + uart1: uart@7e215040 { + compatible = "brcm,bcm2835-aux-uart"; + reg = <0x7e215040 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_UART>; + }; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: kernel@martin.sperl.org (kernel at martin.sperl.org) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart Date: Sat, 9 Jan 2016 13:07:32 +0000 [thread overview] Message-ID: <1452344854-2576-2-git-send-email-kernel@martin.sperl.org> (raw) In-Reply-To: <1452344854-2576-1-git-send-email-kernel@martin.sperl.org> From: Martin Sperl <kernel@martin.sperl.org> Add binding documentation for the bcm2835-aux-uart driver. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> --- .../bindings/serial/brcm,bcm2835-aux-uart.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt new file mode 100644 index 0000000..2defe5c --- /dev/null +++ b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt @@ -0,0 +1,18 @@ +* BCM2835 AUXILIAR UART + +Required properties: + +- compatible: "brcm,bcm2835-aux-uart" +- reg: The base address of the UART register bank. +- interrupts: A single interrupt specifier. +- clocks: Clock driving the hardware; used to figure out the baud rate + divisor. + +Example: + + uart1: uart at 7e215040 { + compatible = "brcm,bcm2835-aux-uart"; + reg = <0x7e215040 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_UART>; + }; -- 1.7.10.4
next prev parent reply other threads:[~2016-01-09 13:07 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-01-09 13:07 [PATCH V2 0/2] serial: bcm2835: add bcm2835 auxiliar uart driver kernel-TqfNSX0MhmxHKSADF0wUEw 2016-01-09 13:07 ` kernel at martin.sperl.org [not found] ` <1452344854-2576-1-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> 2016-01-09 13:07 ` kernel-TqfNSX0MhmxHKSADF0wUEw [this message] 2016-01-09 13:07 ` [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart kernel at martin.sperl.org [not found] ` <1452344854-2576-2-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> 2016-01-09 20:53 ` Arnd Bergmann 2016-01-09 20:53 ` Arnd Bergmann 2016-01-10 10:49 ` Martin Sperl 2016-01-10 10:49 ` Martin Sperl [not found] ` <175E89CE-581C-48AB-B7FF-6E9A41B033D5-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> 2016-01-11 12:21 ` Arnd Bergmann 2016-01-11 12:21 ` Arnd Bergmann 2016-01-11 13:57 ` Martin Sperl 2016-01-11 13:57 ` Martin Sperl [not found] ` <6035A0DD-AD61-48F7-B641-272BB23F3CD8-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> 2016-01-11 14:40 ` Arnd Bergmann 2016-01-11 14:40 ` Arnd Bergmann 2016-01-28 6:39 ` Eric Anholt 2016-01-28 6:39 ` Eric Anholt 2016-01-09 13:07 ` [PATCH V2 2/2] serial: bcm2835: add driver " kernel-TqfNSX0MhmxHKSADF0wUEw 2016-01-09 13:07 ` kernel at martin.sperl.org [not found] ` <1452344854-2576-3-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> 2016-01-11 9:52 ` Stefan Wahren 2016-01-11 9:52 ` Stefan Wahren 2016-01-11 15:25 ` Peter Korsgaard 2016-01-11 15:25 ` Peter Korsgaard 2016-01-10 15:05 ` [PATCH V2 0/2] serial: bcm2835: add bcm2835 auxiliar uart driver Stefan Wahren 2016-01-10 15:05 ` Stefan Wahren [not found] ` <1057226922.507844.cb24b396-67be-4b7b-9938-7cb30ef4fe05.open-xchange-7tX72C7vayboQLBSYMtkGA@public.gmane.org> 2016-01-10 15:45 ` Martin Sperl 2016-01-10 15:45 ` Martin Sperl [not found] ` <46FD7886-510C-4F0F-A039-500D5438207B-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org> 2016-01-10 21:17 ` Stefan Wahren 2016-01-10 21:17 ` Stefan Wahren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1452344854-2576-2-git-send-email-kernel@martin.sperl.org \ --to=kernel-tqfnsx0mhmxhksadf0wuew@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org \ --cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \ --cc=jslaby-IBi9RG/b67k@public.gmane.org \ --cc=lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.