All of lore.kernel.org
 help / color / mirror / Atom feed
From: Raja Mani <rmani@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, Raja Mani <rmani@qti.qualcomm.com>
Subject: [PATCH 03/12] ath10k: pull reusable code from pci probe and remove for ahb
Date: Wed, 27 Jan 2016 15:24:24 +0530	[thread overview]
Message-ID: <1453888473-2879-4-git-send-email-rmani@qti.qualcomm.com> (raw)
In-Reply-To: <1453888473-2879-1-git-send-email-rmani@qti.qualcomm.com>

Some of the code present in ath10k_pci_{probe|remove} are reusable
in ahb case too. To avoid code duplication, move reusable code to
new functions. Later, those new functions can be called from ahb
module's probe and exit functions.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 64 +++++++++++++++++++++++------------
 drivers/net/wireless/ath/ath10k/pci.h |  2 ++
 2 files changed, 44 insertions(+), 22 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index c5f6604..6ef878c 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3009,6 +3009,37 @@ static bool ath10k_pci_chip_is_supported(u32 dev_id, u32 chip_id)
 	return false;
 }
 
+int ath10k_pci_setup_resource(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret;
+
+	spin_lock_init(&ar_pci->ce_lock);
+	spin_lock_init(&ar_pci->ps_lock);
+
+	setup_timer(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry,
+		    (unsigned long)ar);
+
+	if (QCA_REV_6174(ar))
+		ath10k_pci_override_ce_config(ar);
+
+	ret = ath10k_pci_alloc_pipes(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+void ath10k_pci_release_resource(struct ath10k *ar)
+{
+	ath10k_pci_kill_tasklet(ar);
+	ath10k_pci_ce_deinit(ar);
+	ath10k_pci_free_pipes(ar);
+}
+
 static const struct ath10k_bus_ops ath10k_pci_bus_ops = {
 	.read32		= ath10k_bus_pci_read32,
 	.write32	= ath10k_bus_pci_write32,
@@ -3072,34 +3103,25 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	ar->id.subsystem_vendor = pdev->subsystem_vendor;
 	ar->id.subsystem_device = pdev->subsystem_device;
 
-	spin_lock_init(&ar_pci->ce_lock);
-	spin_lock_init(&ar_pci->ps_lock);
-
-	setup_timer(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry,
-		    (unsigned long)ar);
 	setup_timer(&ar_pci->ps_timer, ath10k_pci_ps_timer,
 		    (unsigned long)ar);
 
-	ret = ath10k_pci_claim(ar);
+	ret = ath10k_pci_setup_resource(ar);
 	if (ret) {
-		ath10k_err(ar, "failed to claim device: %d\n", ret);
+		ath10k_err(ar, "failed to setup resource: %d\n", ret);
 		goto err_core_destroy;
 	}
 
-	if (QCA_REV_6174(ar))
-		ath10k_pci_override_ce_config(ar);
-
-	ret = ath10k_pci_alloc_pipes(ar);
+	ret = ath10k_pci_claim(ar);
 	if (ret) {
-		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
-			   ret);
-		goto err_sleep;
+		ath10k_err(ar, "failed to claim device: %d\n", ret);
+		goto err_free_pipes;
 	}
 
 	ret = ath10k_pci_force_wake(ar);
 	if (ret) {
 		ath10k_warn(ar, "failed to wake up device : %d\n", ret);
-		goto err_free_pipes;
+		goto err_sleep;
 	}
 
 	ath10k_pci_ce_deinit(ar);
@@ -3108,7 +3130,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	ret = ath10k_pci_init_irq(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to init irqs: %d\n", ret);
-		goto err_free_pipes;
+		goto err_sleep;
 	}
 
 	ath10k_info(ar, "pci irq %s interrupts %d irq_mode %d reset_mode %d\n",
@@ -3154,13 +3176,13 @@ err_free_irq:
 err_deinit_irq:
 	ath10k_pci_deinit_irq(ar);
 
-err_free_pipes:
-	ath10k_pci_free_pipes(ar);
-
 err_sleep:
 	ath10k_pci_sleep_sync(ar);
 	ath10k_pci_release(ar);
 
+err_free_pipes:
+	ath10k_pci_free_pipes(ar);
+
 err_core_destroy:
 	ath10k_core_destroy(ar);
 
@@ -3184,10 +3206,8 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
 
 	ath10k_core_unregister(ar);
 	ath10k_pci_free_irq(ar);
-	ath10k_pci_kill_tasklet(ar);
 	ath10k_pci_deinit_irq(ar);
-	ath10k_pci_ce_deinit(ar);
-	ath10k_pci_free_pipes(ar);
+	ath10k_pci_release_resource(ar);
 	ath10k_pci_sleep_sync(ar);
 	ath10k_pci_release(ar);
 	ath10k_core_destroy(ar);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index 41f3fac..fcfdbca 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -292,6 +292,8 @@ void ath10k_pci_enable_legacy_irq(struct ath10k *ar);
 bool ath10k_pci_irq_pending(struct ath10k *ar);
 void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar);
 int ath10k_pci_wait_for_target_init(struct ath10k *ar);
+int ath10k_pci_setup_resource(struct ath10k *ar);
+void ath10k_pci_release_resource(struct ath10k *ar);
 
 /* QCA6174 is known to have Tx/Rx issues when SOC_WAKE register is poked too
  * frequently. To avoid this put SoC to sleep after a very conservative grace
-- 
1.8.1.2


WARNING: multiple messages have this Message-ID (diff)
From: Raja Mani <rmani@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Raja Mani <rmani@qti.qualcomm.com>
Subject: [PATCH 03/12] ath10k: pull reusable code from pci probe and remove for ahb
Date: Wed, 27 Jan 2016 15:24:24 +0530	[thread overview]
Message-ID: <1453888473-2879-4-git-send-email-rmani@qti.qualcomm.com> (raw)
In-Reply-To: <1453888473-2879-1-git-send-email-rmani@qti.qualcomm.com>

Some of the code present in ath10k_pci_{probe|remove} are reusable
in ahb case too. To avoid code duplication, move reusable code to
new functions. Later, those new functions can be called from ahb
module's probe and exit functions.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 64 +++++++++++++++++++++++------------
 drivers/net/wireless/ath/ath10k/pci.h |  2 ++
 2 files changed, 44 insertions(+), 22 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index c5f6604..6ef878c 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3009,6 +3009,37 @@ static bool ath10k_pci_chip_is_supported(u32 dev_id, u32 chip_id)
 	return false;
 }
 
+int ath10k_pci_setup_resource(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret;
+
+	spin_lock_init(&ar_pci->ce_lock);
+	spin_lock_init(&ar_pci->ps_lock);
+
+	setup_timer(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry,
+		    (unsigned long)ar);
+
+	if (QCA_REV_6174(ar))
+		ath10k_pci_override_ce_config(ar);
+
+	ret = ath10k_pci_alloc_pipes(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+void ath10k_pci_release_resource(struct ath10k *ar)
+{
+	ath10k_pci_kill_tasklet(ar);
+	ath10k_pci_ce_deinit(ar);
+	ath10k_pci_free_pipes(ar);
+}
+
 static const struct ath10k_bus_ops ath10k_pci_bus_ops = {
 	.read32		= ath10k_bus_pci_read32,
 	.write32	= ath10k_bus_pci_write32,
@@ -3072,34 +3103,25 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	ar->id.subsystem_vendor = pdev->subsystem_vendor;
 	ar->id.subsystem_device = pdev->subsystem_device;
 
-	spin_lock_init(&ar_pci->ce_lock);
-	spin_lock_init(&ar_pci->ps_lock);
-
-	setup_timer(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry,
-		    (unsigned long)ar);
 	setup_timer(&ar_pci->ps_timer, ath10k_pci_ps_timer,
 		    (unsigned long)ar);
 
-	ret = ath10k_pci_claim(ar);
+	ret = ath10k_pci_setup_resource(ar);
 	if (ret) {
-		ath10k_err(ar, "failed to claim device: %d\n", ret);
+		ath10k_err(ar, "failed to setup resource: %d\n", ret);
 		goto err_core_destroy;
 	}
 
-	if (QCA_REV_6174(ar))
-		ath10k_pci_override_ce_config(ar);
-
-	ret = ath10k_pci_alloc_pipes(ar);
+	ret = ath10k_pci_claim(ar);
 	if (ret) {
-		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
-			   ret);
-		goto err_sleep;
+		ath10k_err(ar, "failed to claim device: %d\n", ret);
+		goto err_free_pipes;
 	}
 
 	ret = ath10k_pci_force_wake(ar);
 	if (ret) {
 		ath10k_warn(ar, "failed to wake up device : %d\n", ret);
-		goto err_free_pipes;
+		goto err_sleep;
 	}
 
 	ath10k_pci_ce_deinit(ar);
@@ -3108,7 +3130,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	ret = ath10k_pci_init_irq(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to init irqs: %d\n", ret);
-		goto err_free_pipes;
+		goto err_sleep;
 	}
 
 	ath10k_info(ar, "pci irq %s interrupts %d irq_mode %d reset_mode %d\n",
@@ -3154,13 +3176,13 @@ err_free_irq:
 err_deinit_irq:
 	ath10k_pci_deinit_irq(ar);
 
-err_free_pipes:
-	ath10k_pci_free_pipes(ar);
-
 err_sleep:
 	ath10k_pci_sleep_sync(ar);
 	ath10k_pci_release(ar);
 
+err_free_pipes:
+	ath10k_pci_free_pipes(ar);
+
 err_core_destroy:
 	ath10k_core_destroy(ar);
 
@@ -3184,10 +3206,8 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
 
 	ath10k_core_unregister(ar);
 	ath10k_pci_free_irq(ar);
-	ath10k_pci_kill_tasklet(ar);
 	ath10k_pci_deinit_irq(ar);
-	ath10k_pci_ce_deinit(ar);
-	ath10k_pci_free_pipes(ar);
+	ath10k_pci_release_resource(ar);
 	ath10k_pci_sleep_sync(ar);
 	ath10k_pci_release(ar);
 	ath10k_core_destroy(ar);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index 41f3fac..fcfdbca 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -292,6 +292,8 @@ void ath10k_pci_enable_legacy_irq(struct ath10k *ar);
 bool ath10k_pci_irq_pending(struct ath10k *ar);
 void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar);
 int ath10k_pci_wait_for_target_init(struct ath10k *ar);
+int ath10k_pci_setup_resource(struct ath10k *ar);
+void ath10k_pci_release_resource(struct ath10k *ar);
 
 /* QCA6174 is known to have Tx/Rx issues when SOC_WAKE register is poked too
  * frequently. To avoid this put SoC to sleep after a very conservative grace
-- 
1.8.1.2


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2016-01-27  9:57 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-27  9:54 [PATCH 00/12] add ahb (qca4019) support Raja Mani
2016-01-27  9:54 ` Raja Mani
2016-01-27  9:54 ` [PATCH 01/12] ath10k: make some of ath10k_pci_* func reusable Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-01-27  9:54 ` [PATCH 02/12] ath10k: make ath10k_pci_read32/write32() ops more generic Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-01-27  9:54 ` Raja Mani [this message]
2016-01-27  9:54   ` [PATCH 03/12] ath10k: pull reusable code from pci probe and remove for ahb Raja Mani
2016-01-27  9:54 ` [PATCH 04/12] ath10k: add basic skeleton to support ahb Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-01-27  9:54 ` [PATCH 05/12] ath10k: include qca4019 register map table Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-01-27  9:54 ` [PATCH 06/12] ath10k: add helper functions in ahb.c for reg rd/wr Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-01-27  9:54 ` [PATCH 07/12] ath10k: add clock ctrl related functions in ahb Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-01-27  9:54 ` [PATCH 08/12] ath10k: add reset " Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-01-27  9:54 ` [PATCH 09/12] ath10k: add chip and bus halt logic " Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-01-27  9:54 ` [PATCH 10/12] ath10k: include irq related functions " Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-01-27  9:54 ` [PATCH 11/12] ath10k: add resource init and deinit " Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-01-27  9:54 ` [PATCH 12/12] ath10k: expose hif ops for ahb Raja Mani
2016-01-27  9:54   ` Raja Mani
2016-02-02 11:19 ` [PATCH 00/12] add ahb (qca4019) support Kalle Valo
2016-02-02 11:19   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453888473-2879-4-git-send-email-rmani@qti.qualcomm.com \
    --to=rmani@qti.qualcomm.com \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.