From: Geert Uytterhoeven <geert+renesas@glider.be> To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH v4 03/11] ARM: dts: r8a73a4: Rename the serial port clock to fck Date: Fri, 29 Jan 2016 10:47:33 +0100 [thread overview] Message-ID: <1454060861-2375-4-git-send-email-geert+renesas@glider.be> (raw) In-Reply-To: <1454060861-2375-1-git-send-email-geert+renesas@glider.be> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v4: - Change one-line summary prefix to match current arm-soc practices, v3: - No changes, v2: - Add Acked-by. --- arch/arm/boot/dts/r8a73a4.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 64f3efcd7ba5f4e2..138414a7d1703781 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -335,7 +335,7 @@ reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -345,7 +345,7 @@ reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -355,7 +355,7 @@ reg = <0 0xe6c40000 0 0x100>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -365,7 +365,7 @@ reg = <0 0xe6c50000 0 0x100>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -375,7 +375,7 @@ reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -385,7 +385,7 @@ reg = <0 0xe6cf0000 0 0x100>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_c4>; status = "disabled"; }; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: geert+renesas@glider.be (Geert Uytterhoeven) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 03/11] ARM: dts: r8a73a4: Rename the serial port clock to fck Date: Fri, 29 Jan 2016 10:47:33 +0100 [thread overview] Message-ID: <1454060861-2375-4-git-send-email-geert+renesas@glider.be> (raw) In-Reply-To: <1454060861-2375-1-git-send-email-geert+renesas@glider.be> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v4: - Change one-line summary prefix to match current arm-soc practices, v3: - No changes, v2: - Add Acked-by. --- arch/arm/boot/dts/r8a73a4.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 64f3efcd7ba5f4e2..138414a7d1703781 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -335,7 +335,7 @@ reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -345,7 +345,7 @@ reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -355,7 +355,7 @@ reg = <0 0xe6c40000 0 0x100>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -365,7 +365,7 @@ reg = <0 0xe6c50000 0 0x100>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -375,7 +375,7 @@ reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -385,7 +385,7 @@ reg = <0 0xe6cf0000 0 0x100>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_c4>; status = "disabled"; }; -- 1.9.1
next prev parent reply other threads:[~2016-01-29 9:47 UTC|newest] Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-01-29 9:47 [PATCH v4 00/11] ARM: dts: shmobile: Rename the serial port clock to fck Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` [PATCH v4 01/11] ARM: dts: sh73a0: " Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven [not found] ` <1454060861-2375-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org> 2016-01-29 9:47 ` [PATCH v4 02/11] ARM: dts: r7s72100: " Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` [PATCH v4 10/11] ARM: dts: r8a7794: " Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` [PATCH v4 11/11] arm64: dts: r8a7795: " Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven [this message] 2016-01-29 9:47 ` [PATCH v4 03/11] ARM: dts: r8a73a4: " Geert Uytterhoeven 2016-01-29 9:47 ` [PATCH v4 04/11] ARM: dts: r8a7740: " Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` [PATCH v4 05/11] ARM: dts: r8a7778: " Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` [PATCH v4 06/11] ARM: dts: r8a7779: " Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` [PATCH v4 07/11] ARM: dts: r8a7790: " Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` [PATCH v4 08/11] ARM: dts: r8a7791: " Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-01-29 9:47 ` [PATCH v4 09/11] ARM: dts: r8a7793: " Geert Uytterhoeven 2016-01-29 9:47 ` Geert Uytterhoeven 2016-02-02 10:12 ` [PATCH v4 00/11] ARM: dts: shmobile: " Simon Horman 2016-02-02 10:12 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1454060861-2375-4-git-send-email-geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=devicetree@vger.kernel.org \ --cc=horms@verge.net.au \ --cc=laurent.pinchart+renesas@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.