All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Anton Bondarenko
	<anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [PATCH 04/13] spi: imx: drop fallback to PIO
Date: Wed, 17 Feb 2016 14:28:50 +0100	[thread overview]
Message-ID: <1455715739-25161-5-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1455715739-25161-1-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>

At the moment the driver decides to fallback to PIO mode the buffers
are already mapped for DMA. It's a bug to access them with the CPU
afterwards, so we cannot just fallback to PIO mode.
It should not be necessary anyway, since we only use DMA when we
verified that it's possible in the fist place, so when prep_slave_sg
fails it's a bug, either in the SDMA driver or in the can_dma
implementation.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index b277375..5a48d07 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -945,7 +945,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 					tx->sgl, tx->nents, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_tx)
-			goto no_dma;
+			return -EINVAL;
 
 		desc_tx->callback = spi_imx_dma_tx_callback;
 		desc_tx->callback_param = (void *)spi_imx;
@@ -957,7 +957,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 					rx->sgl, rx->nents, DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_rx)
-			goto no_dma;
+			return -EINVAL;
 
 		desc_rx->callback = spi_imx_dma_rx_callback;
 		desc_rx->callback_param = (void *)spi_imx;
@@ -1010,10 +1010,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 		ret = transfer->len;
 
 	return ret;
-
-no_dma:
-	dev_warn_once(spi_imx->dev, "DMA not available, falling back to PIO\n");
-	return -EAGAIN;
 }
 
 static int spi_imx_pio_transfer(struct spi_device *spi,
@@ -1040,15 +1036,12 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
 static int spi_imx_transfer(struct spi_device *spi,
 				struct spi_transfer *transfer)
 {
-	int ret;
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 
 	if (spi_imx->bitbang.master->can_dma &&
 	    spi_imx_can_dma(spi_imx->bitbang.master, spi, transfer)) {
 		spi_imx->usedma = true;
-		ret = spi_imx_dma_transfer(spi_imx, transfer);
-		if (ret != -EAGAIN)
-			return ret;
+		return spi_imx_dma_transfer(spi_imx, transfer);
 	}
 	spi_imx->usedma = false;
 
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/13] spi: imx: drop fallback to PIO
Date: Wed, 17 Feb 2016 14:28:50 +0100	[thread overview]
Message-ID: <1455715739-25161-5-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1455715739-25161-1-git-send-email-s.hauer@pengutronix.de>

At the moment the driver decides to fallback to PIO mode the buffers
are already mapped for DMA. It's a bug to access them with the CPU
afterwards, so we cannot just fallback to PIO mode.
It should not be necessary anyway, since we only use DMA when we
verified that it's possible in the fist place, so when prep_slave_sg
fails it's a bug, either in the SDMA driver or in the can_dma
implementation.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index b277375..5a48d07 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -945,7 +945,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 					tx->sgl, tx->nents, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_tx)
-			goto no_dma;
+			return -EINVAL;
 
 		desc_tx->callback = spi_imx_dma_tx_callback;
 		desc_tx->callback_param = (void *)spi_imx;
@@ -957,7 +957,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 					rx->sgl, rx->nents, DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_rx)
-			goto no_dma;
+			return -EINVAL;
 
 		desc_rx->callback = spi_imx_dma_rx_callback;
 		desc_rx->callback_param = (void *)spi_imx;
@@ -1010,10 +1010,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 		ret = transfer->len;
 
 	return ret;
-
-no_dma:
-	dev_warn_once(spi_imx->dev, "DMA not available, falling back to PIO\n");
-	return -EAGAIN;
 }
 
 static int spi_imx_pio_transfer(struct spi_device *spi,
@@ -1040,15 +1036,12 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
 static int spi_imx_transfer(struct spi_device *spi,
 				struct spi_transfer *transfer)
 {
-	int ret;
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 
 	if (spi_imx->bitbang.master->can_dma &&
 	    spi_imx_can_dma(spi_imx->bitbang.master, spi, transfer)) {
 		spi_imx->usedma = true;
-		ret = spi_imx_dma_transfer(spi_imx, transfer);
-		if (ret != -EAGAIN)
-			return ret;
+		return spi_imx_dma_transfer(spi_imx, transfer);
 	}
 	spi_imx->usedma = false;
 
-- 
2.7.0

  parent reply	other threads:[~2016-02-17 13:28 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-17 13:28 [PATCH] i.MX SPI DMA cleanup Sascha Hauer
2016-02-17 13:28 ` Sascha Hauer
     [not found] ` <1455715739-25161-1-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-17 13:28   ` [PATCH 01/13] spi: imx: allow only WML aligned transfers to use DMA Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
     [not found]     ` <1455715739-25161-2-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-17 14:16       ` Mark Brown
2016-02-17 14:16         ` Mark Brown
     [not found]         ` <20160217141619.GR7544-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-02-17 15:01           ` Sascha Hauer
2016-02-17 15:01             ` Sascha Hauer
     [not found]             ` <20160217150146.GC3939-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-17 16:05               ` Mark Brown
2016-02-17 16:05                 ` Mark Brown
2016-02-17 19:13       ` Applied "spi: imx: allow only WML aligned transfers to use DMA" to the spi tree Mark Brown
2016-02-17 13:28   ` [PATCH 02/13] spi: imx: use proper dev_* functions for driver messages Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
     [not found]     ` <1455715739-25161-3-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-17 19:13       ` Applied "spi: imx: use proper dev_* functions for driver messages" to the spi tree Mark Brown
2016-02-17 13:28   ` [PATCH 03/13] spi: imx: replace fixed timeout with calculated Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
     [not found]     ` <1455715739-25161-4-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-17 14:22       ` Mark Brown
2016-02-17 14:22         ` Mark Brown
2016-02-20 18:11       ` Applied "spi: imx: replace fixed timeout with calculated" to the spi tree Mark Brown
2016-02-17 13:28   ` Sascha Hauer [this message]
2016-02-17 13:28     ` [PATCH 04/13] spi: imx: drop fallback to PIO Sascha Hauer
2016-02-17 13:28   ` [PATCH 05/13] spi: imx: initialize usedma earlier Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
     [not found]     ` <1455715739-25161-6-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-26  2:48       ` Applied "spi: imx: initialize usedma earlier" to the spi tree Mark Brown
2016-02-17 13:28   ` [PATCH 06/13] spi: imx: drop unnecessary read/modify/write Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
     [not found]     ` <1455715739-25161-7-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-26  2:48       ` Applied "spi: imx: drop unnecessary read/modify/write" to the spi tree Mark Brown
2016-02-17 13:28   ` [PATCH 07/13] spi: imx: drop unncessary dma_is_inited variable Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
     [not found]     ` <1455715739-25161-8-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-26  2:47       ` Applied "spi: imx: drop unncessary dma_is_inited variable" to the spi tree Mark Brown
2016-02-17 13:28   ` [PATCH 08/13] spi: imx: add support for all SPI word width for DMA Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
     [not found]     ` <1455715739-25161-9-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-26  2:47       ` Applied "spi: imx: add support for all SPI word width for DMA" to the spi tree Mark Brown
2016-02-17 13:28   ` [PATCH 09/13] spi: imx: remove unnecessary bit clearing in mx51_ecspi_config Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
     [not found]     ` <1455715739-25161-10-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-26  2:47       ` Applied "spi: imx: remove unnecessary bit clearing in mx51_ecspi_config" to the spi tree Mark Brown
2016-02-17 13:28   ` [PATCH 10/13] spi: imx: make some register defines simpler Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
     [not found]     ` <1455715739-25161-11-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-26  2:47       ` Applied "spi: imx: make some register defines simpler" to the spi tree Mark Brown
2016-02-17 13:28   ` [PATCH 11/13] spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
     [not found]     ` <1455715739-25161-12-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-26  2:47       ` Applied "spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function" to the spi tree Mark Brown
2016-02-17 13:28   ` [PATCH 12/13] spi: imx: drop bogus tests for rx/tx bufs in DMA transfer Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
2016-02-17 13:28   ` [PATCH 13/13] ARM: dts: imx6: Use correct SDMA script for SPI cores Sascha Hauer
2016-02-17 13:28     ` Sascha Hauer
2016-02-17 13:42   ` [PATCH] i.MX SPI DMA cleanup Dirk Behme
2016-02-17 13:42     ` Dirk Behme
     [not found]     ` <56C478C9.6050706-V5te9oGctAVWk0Htik3J/w@public.gmane.org>
2016-02-17 13:54       ` Sascha Hauer
2016-02-17 13:54         ` Sascha Hauer
     [not found]         ` <20160217135441.GA3939-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-17 14:10           ` Dirk Behme
2016-02-17 14:10             ` Dirk Behme
     [not found]             ` <56C47F64.1080706-V5te9oGctAVWk0Htik3J/w@public.gmane.org>
2016-02-17 14:59               ` Sascha Hauer
2016-02-17 14:59                 ` Sascha Hauer
     [not found]                 ` <20160217145944.GB3939-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-17 15:33                   ` Dirk Behme
2016-02-17 15:33                     ` Dirk Behme
     [not found]                     ` <56C492DB.6000405-V5te9oGctAVWk0Htik3J/w@public.gmane.org>
2016-02-17 15:40                       ` Fabio Estevam
2016-02-17 15:40                         ` Fabio Estevam
2016-02-18 14:47   ` Shawn Guo
2016-02-18 14:47     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455715739-25161-5-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer-bicnvbalz9megne8c9+irq@public.gmane.org \
    --cc=anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.