From: Shawn Lin <shawn.lin@rock-chips.com> To: Ulf Hansson <ulf.hansson@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com>, Rob Herring <robh+dt@kernel.org>, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, Shawn Lin <shawn.lin@rock-chips.com> Subject: [PATCH v3 2/5] mmc: core: add mmc-hs400-enhanced-strobe support Date: Tue, 10 May 2016 17:09:43 +0800 [thread overview] Message-ID: <1462871383-32443-1-git-send-email-shawn.lin@rock-chips.com> (raw) In-Reply-To: <1462871343-32361-1-git-send-email-shawn.lin@rock-chips.com> This patch introduce mmc-hs400-enhanced-strobe for platforms which want to enable enhanced strobe function from DT if the mmc host controller claims to support enhanced strobe. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> --- Changes in v3: - remove helper function and shorten cap2 to MMC_CAP2_HS400_ES - rename callback to hs400_enhanced_strobe and make it return void - add enhanced_strobe in mmc_ios and pass it to hs400_enhanced_strobe - disable host's enhanced strobe in mmc_set_initial_state - remove bus checking after switching hs400es - add new function for hs400es timing selection - fix wrong judgement of mmc_card_hs400es Changes in v2: - switch to HS400ES from Highspeed mode directly drivers/mmc/core/host.c | 2 ++ include/linux/mmc/host.h | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index e0a3ee1..45773e4 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -289,6 +289,8 @@ int mmc_of_parse(struct mmc_host *host) host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; if (of_property_read_bool(np, "mmc-hs400-1_2v")) host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; + if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe")) + host->caps2 |= MMC_CAP2_HS400_ES; host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr); if (host->dsr_req && (host->dsr & ~0xffff)) { diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 85800b4..2a06fb0 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -302,6 +302,7 @@ struct mmc_host { #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ #define MMC_CAP2_NO_SDIO (1 << 19) /* Do not send SDIO commands during initialization */ +#define MMC_CAP2_HS400_ES (1 << 20) /* Host supports enhanced strobe */ mmc_pm_flag_t pm_caps; /* supported pm features */ -- 2.3.7
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org> To: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>, Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>, linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Adrian Hunter <adrian.hunter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Subject: [PATCH v3 2/5] mmc: core: add mmc-hs400-enhanced-strobe support Date: Tue, 10 May 2016 17:09:43 +0800 [thread overview] Message-ID: <1462871383-32443-1-git-send-email-shawn.lin@rock-chips.com> (raw) In-Reply-To: <1462871343-32361-1-git-send-email-shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org> This patch introduce mmc-hs400-enhanced-strobe for platforms which want to enable enhanced strobe function from DT if the mmc host controller claims to support enhanced strobe. Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org> --- Changes in v3: - remove helper function and shorten cap2 to MMC_CAP2_HS400_ES - rename callback to hs400_enhanced_strobe and make it return void - add enhanced_strobe in mmc_ios and pass it to hs400_enhanced_strobe - disable host's enhanced strobe in mmc_set_initial_state - remove bus checking after switching hs400es - add new function for hs400es timing selection - fix wrong judgement of mmc_card_hs400es Changes in v2: - switch to HS400ES from Highspeed mode directly drivers/mmc/core/host.c | 2 ++ include/linux/mmc/host.h | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index e0a3ee1..45773e4 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -289,6 +289,8 @@ int mmc_of_parse(struct mmc_host *host) host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; if (of_property_read_bool(np, "mmc-hs400-1_2v")) host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; + if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe")) + host->caps2 |= MMC_CAP2_HS400_ES; host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr); if (host->dsr_req && (host->dsr & ~0xffff)) { diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 85800b4..2a06fb0 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -302,6 +302,7 @@ struct mmc_host { #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ #define MMC_CAP2_NO_SDIO (1 << 19) /* Do not send SDIO commands during initialization */ +#define MMC_CAP2_HS400_ES (1 << 20) /* Host supports enhanced strobe */ mmc_pm_flag_t pm_caps; /* supported pm features */ -- 2.3.7
next prev parent reply other threads:[~2016-05-10 9:10 UTC|newest] Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-05-10 9:09 [PATCH v3 0/5] Add enhanced strobe support for emmc version 5.1 or later Shawn Lin 2016-05-10 9:09 ` Shawn Lin 2016-05-10 9:09 ` Shawn Lin 2016-05-10 9:09 ` [PATCH v3 1/5] Documentation: mmc: add mmc-hs400-enhanced-strobe Shawn Lin 2016-05-10 9:09 ` Shawn Lin [this message] 2016-05-10 9:09 ` [PATCH v3 2/5] mmc: core: add mmc-hs400-enhanced-strobe support Shawn Lin 2016-05-10 9:09 ` [PATCH v3 3/5] mmc: core: implement enhanced strobe support Shawn Lin 2016-05-10 9:09 ` Shawn Lin 2016-05-20 0:18 ` Doug Anderson 2016-05-20 1:48 ` Shawn Lin 2016-05-20 1:48 ` Shawn Lin 2016-05-20 2:19 ` Doug Anderson 2016-05-20 2:45 ` Jaehoon Chung 2016-05-20 3:15 ` Shawn Lin 2016-05-20 3:54 ` Jaehoon Chung 2016-05-20 4:15 ` Shawn Lin 2016-05-10 9:09 ` [PATCH v3 4/5] mmc: debugfs: add HS400 enhanced strobe description Shawn Lin 2016-05-10 9:09 ` Shawn Lin 2016-05-10 9:10 ` [PATCH v3 5/5] mmc: sdhci-of-arasan: implement enhanced strobe callback Shawn Lin 2016-05-10 9:10 ` Shawn Lin 2016-05-20 0:11 ` Doug Anderson 2016-05-20 1:49 ` Shawn Lin 2016-05-20 1:49 ` Shawn Lin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1462871383-32443-1-git-send-email-shawn.lin@rock-chips.com \ --to=shawn.lin@rock-chips.com \ --cc=adrian.hunter@intel.com \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=robh+dt@kernel.org \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.