All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Marc Zyngier <marc.zyngier@arm.com>,
	Christoffer Dall <christoffer.dall@linaro.org>
Cc: Eric Auger <eric.auger@linaro.org>,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org
Subject: [PATCH v5 49/57] KVM: arm/arm64: vgic-new: Add userland GIC CPU interface access
Date: Thu, 19 May 2016 19:08:28 +0100	[thread overview]
Message-ID: <1463681316-23039-50-git-send-email-andre.przywara@arm.com> (raw)
In-Reply-To: <1463681316-23039-1-git-send-email-andre.przywara@arm.com>

To allow userland access to the GIC CPU interface state, we use handler
functions similar to what we use for the distributor and connect those
to the VMCR accessors on one side and our userland access framework on
the other side.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
---
Changelog v2 .. v3:
- total rework, moving into vgic-mmio-v2.c
- move vmcr accessor wrapper functions into this file
- use the register description table for CPU i/f registers as well
- add RAZ/WI handling for the active priority registers
- streamline MMIO handler functions

Changelog v3 .. v4:
- advertise CPU interface registers to userland
- specify accessor width
- replace call to extract_bytes() with a simple return

 virt/kvm/arm/vgic/vgic-kvm-device.c |   2 +-
 virt/kvm/arm/vgic/vgic-mmio-v2.c    | 114 +++++++++++++++++++++++++++++++++++-
 virt/kvm/arm/vgic/vgic.h            |   2 +
 3 files changed, 116 insertions(+), 2 deletions(-)

diff --git a/virt/kvm/arm/vgic/vgic-kvm-device.c b/virt/kvm/arm/vgic/vgic-kvm-device.c
index 9ee27cb..0130c4b 100644
--- a/virt/kvm/arm/vgic/vgic-kvm-device.c
+++ b/virt/kvm/arm/vgic/vgic-kvm-device.c
@@ -274,7 +274,7 @@ static int vgic_attr_regs_access(struct kvm_device *dev,
 
 	switch (attr->group) {
 	case KVM_DEV_ARM_VGIC_GRP_CPU_REGS:
-		ret = -EINVAL;
+		ret = vgic_v2_cpuif_uaccess(vcpu, is_write, addr, reg);
 		break;
 	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
 		ret = vgic_v2_dist_uaccess(vcpu, is_write, addr, reg);
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v2.c b/virt/kvm/arm/vgic/vgic-mmio-v2.c
index a255122..a213936 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v2.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v2.c
@@ -204,6 +204,84 @@ static void vgic_mmio_write_sgipends(struct kvm_vcpu *vcpu,
 	}
 }
 
+static void vgic_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_set_vmcr(vcpu, vmcr);
+	else
+		vgic_v3_set_vmcr(vcpu, vmcr);
+}
+
+static void vgic_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_get_vmcr(vcpu, vmcr);
+	else
+		vgic_v3_get_vmcr(vcpu, vmcr);
+}
+
+#define GICC_ARCH_VERSION_V2	0x2
+
+/* These are for userland accesses only, there is no guest-facing emulation. */
+static unsigned long vgic_mmio_read_vcpuif(struct kvm_vcpu *vcpu,
+					   gpa_t addr, unsigned int len)
+{
+	struct vgic_vmcr vmcr;
+	u32 val;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+
+	switch (addr & 0xff) {
+	case GIC_CPU_CTRL:
+		val = vmcr.ctlr;
+		break;
+	case GIC_CPU_PRIMASK:
+		val = vmcr.pmr;
+		break;
+	case GIC_CPU_BINPOINT:
+		val = vmcr.bpr;
+		break;
+	case GIC_CPU_ALIAS_BINPOINT:
+		val = vmcr.abpr;
+		break;
+	case GIC_CPU_IDENT:
+		val = ((PRODUCT_ID_KVM << 20) |
+		       (GICC_ARCH_VERSION_V2 << 16) |
+		       IMPLEMENTER_ARM);
+		break;
+	default:
+		return 0;
+	}
+
+	return val;
+}
+
+static void vgic_mmio_write_vcpuif(struct kvm_vcpu *vcpu,
+				   gpa_t addr, unsigned int len,
+				   unsigned long val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+
+	switch (addr & 0xff) {
+	case GIC_CPU_CTRL:
+		vmcr.ctlr = val;
+		break;
+	case GIC_CPU_PRIMASK:
+		vmcr.pmr = val;
+		break;
+	case GIC_CPU_BINPOINT:
+		vmcr.bpr = val;
+		break;
+	case GIC_CPU_ALIAS_BINPOINT:
+		vmcr.abpr = val;
+		break;
+	}
+
+	vgic_set_vmcr(vcpu, &vmcr);
+}
+
 static const struct vgic_register_region vgic_v2_dist_registers[] = {
 	REGISTER_DESC_WITH_LENGTH(GIC_DIST_CTRL,
 		vgic_mmio_read_v2_misc, vgic_mmio_write_v2_misc, 12,
@@ -249,6 +327,27 @@ static const struct vgic_register_region vgic_v2_dist_registers[] = {
 		VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),
 };
 
+static const struct vgic_register_region vgic_v2_cpu_registers[] = {
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_CTRL,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_PRIMASK,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_BINPOINT,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_ALIAS_BINPOINT,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_ACTIVEPRIO,
+		vgic_mmio_read_raz, vgic_mmio_write_wi, 16,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_IDENT,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+};
+
 unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev)
 {
 	dev->regions = vgic_v2_dist_registers;
@@ -274,7 +373,9 @@ int vgic_v2_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr)
 		nr_regions = ARRAY_SIZE(vgic_v2_dist_registers);
 		break;
 	case KVM_DEV_ARM_VGIC_GRP_CPU_REGS:
-		return -ENXIO;		/* TODO: describe CPU i/f regs also */
+		regions = vgic_v2_cpu_registers;
+		nr_regions = ARRAY_SIZE(vgic_v2_cpu_registers);
+		break;
 	default:
 		return -ENXIO;
 	}
@@ -322,6 +423,17 @@ static int vgic_uaccess(struct kvm_vcpu *vcpu, struct vgic_io_device *dev,
 	return ret;
 }
 
+int vgic_v2_cpuif_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			  int offset, u32 *val)
+{
+	struct vgic_io_device dev = {
+		.regions = vgic_v2_cpu_registers,
+		.nr_regions = ARRAY_SIZE(vgic_v2_cpu_registers),
+	};
+
+	return vgic_uaccess(vcpu, &dev, is_write, offset, val);
+}
+
 int vgic_v2_dist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
 			 int offset, u32 *val)
 {
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index d2c1fd5..de9dc71 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -47,6 +47,8 @@ void vgic_v2_set_underflow(struct kvm_vcpu *vcpu);
 int vgic_v2_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr);
 int vgic_v2_dist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
 			 int offset, u32 *val);
+int vgic_v2_cpuif_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			  int offset, u32 *val);
 void vgic_v2_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
-- 
2.8.2


WARNING: multiple messages have this Message-ID (diff)
From: andre.przywara@arm.com (Andre Przywara)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 49/57] KVM: arm/arm64: vgic-new: Add userland GIC CPU interface access
Date: Thu, 19 May 2016 19:08:28 +0100	[thread overview]
Message-ID: <1463681316-23039-50-git-send-email-andre.przywara@arm.com> (raw)
In-Reply-To: <1463681316-23039-1-git-send-email-andre.przywara@arm.com>

To allow userland access to the GIC CPU interface state, we use handler
functions similar to what we use for the distributor and connect those
to the VMCR accessors on one side and our userland access framework on
the other side.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
---
Changelog v2 .. v3:
- total rework, moving into vgic-mmio-v2.c
- move vmcr accessor wrapper functions into this file
- use the register description table for CPU i/f registers as well
- add RAZ/WI handling for the active priority registers
- streamline MMIO handler functions

Changelog v3 .. v4:
- advertise CPU interface registers to userland
- specify accessor width
- replace call to extract_bytes() with a simple return

 virt/kvm/arm/vgic/vgic-kvm-device.c |   2 +-
 virt/kvm/arm/vgic/vgic-mmio-v2.c    | 114 +++++++++++++++++++++++++++++++++++-
 virt/kvm/arm/vgic/vgic.h            |   2 +
 3 files changed, 116 insertions(+), 2 deletions(-)

diff --git a/virt/kvm/arm/vgic/vgic-kvm-device.c b/virt/kvm/arm/vgic/vgic-kvm-device.c
index 9ee27cb..0130c4b 100644
--- a/virt/kvm/arm/vgic/vgic-kvm-device.c
+++ b/virt/kvm/arm/vgic/vgic-kvm-device.c
@@ -274,7 +274,7 @@ static int vgic_attr_regs_access(struct kvm_device *dev,
 
 	switch (attr->group) {
 	case KVM_DEV_ARM_VGIC_GRP_CPU_REGS:
-		ret = -EINVAL;
+		ret = vgic_v2_cpuif_uaccess(vcpu, is_write, addr, reg);
 		break;
 	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
 		ret = vgic_v2_dist_uaccess(vcpu, is_write, addr, reg);
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v2.c b/virt/kvm/arm/vgic/vgic-mmio-v2.c
index a255122..a213936 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v2.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v2.c
@@ -204,6 +204,84 @@ static void vgic_mmio_write_sgipends(struct kvm_vcpu *vcpu,
 	}
 }
 
+static void vgic_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_set_vmcr(vcpu, vmcr);
+	else
+		vgic_v3_set_vmcr(vcpu, vmcr);
+}
+
+static void vgic_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_get_vmcr(vcpu, vmcr);
+	else
+		vgic_v3_get_vmcr(vcpu, vmcr);
+}
+
+#define GICC_ARCH_VERSION_V2	0x2
+
+/* These are for userland accesses only, there is no guest-facing emulation. */
+static unsigned long vgic_mmio_read_vcpuif(struct kvm_vcpu *vcpu,
+					   gpa_t addr, unsigned int len)
+{
+	struct vgic_vmcr vmcr;
+	u32 val;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+
+	switch (addr & 0xff) {
+	case GIC_CPU_CTRL:
+		val = vmcr.ctlr;
+		break;
+	case GIC_CPU_PRIMASK:
+		val = vmcr.pmr;
+		break;
+	case GIC_CPU_BINPOINT:
+		val = vmcr.bpr;
+		break;
+	case GIC_CPU_ALIAS_BINPOINT:
+		val = vmcr.abpr;
+		break;
+	case GIC_CPU_IDENT:
+		val = ((PRODUCT_ID_KVM << 20) |
+		       (GICC_ARCH_VERSION_V2 << 16) |
+		       IMPLEMENTER_ARM);
+		break;
+	default:
+		return 0;
+	}
+
+	return val;
+}
+
+static void vgic_mmio_write_vcpuif(struct kvm_vcpu *vcpu,
+				   gpa_t addr, unsigned int len,
+				   unsigned long val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+
+	switch (addr & 0xff) {
+	case GIC_CPU_CTRL:
+		vmcr.ctlr = val;
+		break;
+	case GIC_CPU_PRIMASK:
+		vmcr.pmr = val;
+		break;
+	case GIC_CPU_BINPOINT:
+		vmcr.bpr = val;
+		break;
+	case GIC_CPU_ALIAS_BINPOINT:
+		vmcr.abpr = val;
+		break;
+	}
+
+	vgic_set_vmcr(vcpu, &vmcr);
+}
+
 static const struct vgic_register_region vgic_v2_dist_registers[] = {
 	REGISTER_DESC_WITH_LENGTH(GIC_DIST_CTRL,
 		vgic_mmio_read_v2_misc, vgic_mmio_write_v2_misc, 12,
@@ -249,6 +327,27 @@ static const struct vgic_register_region vgic_v2_dist_registers[] = {
 		VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),
 };
 
+static const struct vgic_register_region vgic_v2_cpu_registers[] = {
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_CTRL,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_PRIMASK,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_BINPOINT,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_ALIAS_BINPOINT,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_ACTIVEPRIO,
+		vgic_mmio_read_raz, vgic_mmio_write_wi, 16,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_IDENT,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+};
+
 unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev)
 {
 	dev->regions = vgic_v2_dist_registers;
@@ -274,7 +373,9 @@ int vgic_v2_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr)
 		nr_regions = ARRAY_SIZE(vgic_v2_dist_registers);
 		break;
 	case KVM_DEV_ARM_VGIC_GRP_CPU_REGS:
-		return -ENXIO;		/* TODO: describe CPU i/f regs also */
+		regions = vgic_v2_cpu_registers;
+		nr_regions = ARRAY_SIZE(vgic_v2_cpu_registers);
+		break;
 	default:
 		return -ENXIO;
 	}
@@ -322,6 +423,17 @@ static int vgic_uaccess(struct kvm_vcpu *vcpu, struct vgic_io_device *dev,
 	return ret;
 }
 
+int vgic_v2_cpuif_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			  int offset, u32 *val)
+{
+	struct vgic_io_device dev = {
+		.regions = vgic_v2_cpu_registers,
+		.nr_regions = ARRAY_SIZE(vgic_v2_cpu_registers),
+	};
+
+	return vgic_uaccess(vcpu, &dev, is_write, offset, val);
+}
+
 int vgic_v2_dist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
 			 int offset, u32 *val)
 {
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index d2c1fd5..de9dc71 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -47,6 +47,8 @@ void vgic_v2_set_underflow(struct kvm_vcpu *vcpu);
 int vgic_v2_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr);
 int vgic_v2_dist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
 			 int offset, u32 *val);
+int vgic_v2_cpuif_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			  int offset, u32 *val);
 void vgic_v2_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
-- 
2.8.2

  parent reply	other threads:[~2016-05-19 18:09 UTC|newest]

Thread overview: 118+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-19 18:07 [PATCH v5 00/57] KVM: arm/arm64: Rework virtual GIC emulation Andre Przywara
2016-05-19 18:07 ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 01/57] KVM: arm/arm64: vgic: streamline vgic_update_irq_pending() interface Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 02/57] KVM: arm/arm64: vgic: avoid map in kvm_vgic_inject_mapped_irq() Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 03/57] KVM: arm/arm64: vgic: avoid map in kvm_vgic_map_is_active() Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 04/57] KVM: arm/arm64: vgic: avoid map in kvm_vgic_unmap_phys_irq() Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 05/57] KVM: arm/arm64: Remove the IRQ field from struct irq_phys_map Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 06/57] KVM: arm/arm64: arch_timer: Remove irq_phys_map Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 07/57] KVM: arm/arm64: vgic: Remove irq_phys_map from interface Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 08/57] KVM: arm/arm64: Move timer IRQ map to latest possible time Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 09/57] KVM: arm/arm64: Get rid of vgic_cpu->nr_lr Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 10/57] KVM: arm/arm64: Fix MMIO emulation data handling Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 11/57] KVM: arm/arm64: Export mmio_read/write_bus Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 12/57] KVM: arm/arm64: pmu: abstract access to number of SPIs Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 13/57] KVM: arm/arm64: Provide functionality to pause and resume a guest Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 14/57] KVM: arm/arm64: move GICv2 emulation defines into arm-gic-v3.h Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 15/57] KVM: arm/arm64: vgic-new: Add data structure definitions Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 16/57] KVM: arm/arm64: vgic-new: Add acccessor to new struct vgic_irq instance Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 17/57] KVM: arm/arm64: vgic-new: Implement virtual IRQ injection Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 18/57] KVM: arm/arm64: vgic-new: Add IRQ sorting Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 19/57] KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 20/57] KVM: arm/arm64: vgic-new: Add GICv2 world switch backend Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 21/57] KVM: arm/arm64: vgic-new: Add GICv3 " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 22/57] KVM: arm/arm64: vgic-new: Implement kvm_vgic_vcpu_pending_irq Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 23/57] KVM: arm/arm64: vgic-new: Add MMIO handling framework Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 24/57] KVM: arm/arm64: vgic-new: Add GICv2 " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 25/57] KVM: arm/arm64: vgic-new: Add CTLR, TYPER and IIDR handlers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 26/57] KVM: arm/arm64: vgic-new: Add ENABLE registers handlers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 27/57] KVM: arm/arm64: vgic-new: Add PENDING " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 28/57] KVM: arm/arm64: vgic-new: Add ACTIVE " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 29/57] KVM: arm/arm64: vgic-new: Add PRIORITY " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 30/57] KVM: arm/arm64: vgic-new: Add CONFIG " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 31/57] KVM: arm/arm64: vgic-new: Add TARGET " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 32/57] KVM: arm/arm64: vgic-new: Add SGIR register handler Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 33/57] KVM: arm/arm64: vgic-new: Add SGIPENDR register handlers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 34/57] KVM: arm/arm64: vgic-new: Add GICv3 MMIO handling framework Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 35/57] KVM: arm/arm64: vgic-new: Add GICv3 CTLR, IIDR, TYPER handlers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 36/57] KVM: arm/arm64: vgic-new: Add GICv3 redistributor IIDR and TYPER handler Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 37/57] KVM: arm/arm64: vgic-new: Add GICv3 IDREGS register handler Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 38/57] KVM: arm/arm64: vgic-new: Add GICv3 IROUTER register handlers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 39/57] KVM: arm/arm64: vgic-new: Add GICv3 SGI system register trap handler Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 40/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM device ops registration Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 41/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_NR_IRQS Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 42/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_CTRL Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 43/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: implement kvm_vgic_addr Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 44/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_ADDR Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 45/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: access to VGIC registers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 46/57] KVM: arm/arm64: vgic-new: Export register access interface Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 47/57] KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 48/57] KVM: arm/arm64: vgic-new: Add GICH_VMCR accessors Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` Andre Przywara [this message]
2016-05-19 18:08   ` [PATCH v5 49/57] KVM: arm/arm64: vgic-new: Add userland GIC CPU interface access Andre Przywara
2016-05-19 18:08 ` [PATCH v5 50/57] KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 51/57] KVM: arm/arm64: vgic-new: vgic_init: implement vgic_create Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 52/57] KVM: arm/arm64: vgic-new: vgic_init: implement vgic_init Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 53/57] KVM: arm/arm64: vgic-new: vgic_init: implement map_resources Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 54/57] KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enable Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 55/57] KVM: arm/arm64: vgic-new: Wire up irqfd injection Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 56/57] KVM: arm/arm64: vgic-new: implement mapped IRQ handling Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 57/57] KVM: arm/arm64: vgic-new: enable build Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-20 15:04 ` [PATCH v5 00/57] KVM: arm/arm64: Rework virtual GIC emulation Christoffer Dall
2016-05-20 15:04   ` Christoffer Dall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463681316-23039-50-git-send-email-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=eric.auger@linaro.org \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.