All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Marc Zyngier <marc.zyngier@arm.com>,
	Christoffer Dall <christoffer.dall@linaro.org>
Cc: Eric Auger <eric.auger@linaro.org>,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org
Subject: [PATCH v5 53/57] KVM: arm/arm64: vgic-new: vgic_init: implement map_resources
Date: Thu, 19 May 2016 19:08:32 +0100	[thread overview]
Message-ID: <1463681316-23039-54-git-send-email-andre.przywara@arm.com> (raw)
In-Reply-To: <1463681316-23039-1-git-send-email-andre.przywara@arm.com>

From: Eric Auger <eric.auger@linaro.org>

map_resources is the last initialization step. It is executed on
first VCPU run. At that stage the code checks that userspace has provided
the base addresses for the relevant VGIC regions, which depend on the
type of VGIC that is exposed to the guest.  Also we check if the two
regions overlap.
If the checks succeeded, we register the respective register frames with
the kvm_io_bus framework.

If we emulate a GICv2, the function also forces vgic_init execution if
it has not been executed yet. Also we map the virtual GIC CPU interface
onto the guest's CPU interface.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
---
Changelog v3 .. v4:
- add overlap check (moved from kvm_vgic_addr())
- reword commit message
- improve comment

 include/kvm/vgic/vgic.h       |  1 +
 virt/kvm/arm/vgic/vgic-init.c | 28 +++++++++++++++++
 virt/kvm/arm/vgic/vgic-v2.c   | 69 +++++++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic-v3.c   | 71 +++++++++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic.h      |  7 +++++
 5 files changed, 176 insertions(+)

diff --git a/include/kvm/vgic/vgic.h b/include/kvm/vgic/vgic.h
index e7ae36b..17b2a73 100644
--- a/include/kvm/vgic/vgic.h
+++ b/include/kvm/vgic/vgic.h
@@ -201,6 +201,7 @@ int kvm_vgic_create(struct kvm *kvm, u32 type);
 void kvm_vgic_destroy(struct kvm *kvm);
 void kvm_vgic_vcpu_early_init(struct kvm_vcpu *vcpu);
 void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu);
+int kvm_vgic_map_resources(struct kvm *kvm);
 int kvm_vgic_hyp_init(void);
 
 int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int intid,
diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c
index bed3240..a1442f7 100644
--- a/virt/kvm/arm/vgic/vgic-init.c
+++ b/virt/kvm/arm/vgic/vgic-init.c
@@ -323,6 +323,34 @@ int vgic_lazy_init(struct kvm *kvm)
 	return ret;
 }
 
+/* RESOURCE MAPPING */
+
+/**
+ * Map the MMIO regions depending on the VGIC model exposed to the guest
+ * called on the first VCPU run.
+ * Also map the virtual CPU interface into the VM.
+ * v2/v3 derivatives call vgic_init if not already done.
+ * vgic_ready() returns true if this function has succeeded.
+ * @kvm: kvm struct pointer
+ */
+int kvm_vgic_map_resources(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	int ret = 0;
+
+	mutex_lock(&kvm->lock);
+	if (!irqchip_in_kernel(kvm))
+		goto out;
+
+	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2)
+		ret = vgic_v2_map_resources(kvm);
+	else
+		ret = vgic_v3_map_resources(kvm);
+out:
+	mutex_unlock(&kvm->lock);
+	return ret;
+}
+
 /* GENERIC PROBE */
 
 static void vgic_init_maintenance_interrupt(void *info)
diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c
index fcbfa38..1fe031b 100644
--- a/virt/kvm/arm/vgic/vgic-v2.c
+++ b/virt/kvm/arm/vgic/vgic-v2.c
@@ -211,6 +211,75 @@ void vgic_v2_enable(struct kvm_vcpu *vcpu)
 {
 }
 
+/* check for overlapping regions and for regions crossing the end of memory */
+static bool vgic_v2_check_base(gpa_t dist_base, gpa_t cpu_base)
+{
+	if (dist_base + KVM_VGIC_V2_DIST_SIZE < dist_base)
+		return false;
+	if (cpu_base + KVM_VGIC_V2_CPU_SIZE < cpu_base)
+		return false;
+
+	if (dist_base + KVM_VGIC_V2_DIST_SIZE <= cpu_base)
+		return true;
+	if (cpu_base + KVM_VGIC_V2_CPU_SIZE <= dist_base)
+		return true;
+
+	return false;
+}
+
+int vgic_v2_map_resources(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	int ret = 0;
+
+	if (vgic_ready(kvm))
+		goto out;
+
+	if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) ||
+	    IS_VGIC_ADDR_UNDEF(dist->vgic_cpu_base)) {
+		kvm_err("Need to set vgic cpu and dist addresses first\n");
+		ret = -ENXIO;
+		goto out;
+	}
+
+	if (!vgic_v2_check_base(dist->vgic_dist_base, dist->vgic_cpu_base)) {
+		kvm_err("VGIC CPU and dist frames overlap\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/*
+	 * Initialize the vgic if this hasn't already been done on demand by
+	 * accessing the vgic state from userspace.
+	 */
+	ret = vgic_init(kvm);
+	if (ret) {
+		kvm_err("Unable to initialize VGIC dynamic data structures\n");
+		goto out;
+	}
+
+	ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V2);
+	if (ret) {
+		kvm_err("Unable to register VGIC MMIO regions\n");
+		goto out;
+	}
+
+	ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base,
+				    kvm_vgic_global_state.vcpu_base,
+				    KVM_VGIC_V2_CPU_SIZE, true);
+	if (ret) {
+		kvm_err("Unable to remap VGIC CPU to VCPU\n");
+		goto out;
+	}
+
+	dist->ready = true;
+
+out:
+	if (ret)
+		kvm_vgic_destroy(kvm);
+	return ret;
+}
+
 /**
  * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in DT
  * @node:	pointer to the DT node
diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c
index d1c0285..637ff2b 100644
--- a/virt/kvm/arm/vgic/vgic-v3.c
+++ b/virt/kvm/arm/vgic/vgic-v3.c
@@ -191,6 +191,77 @@ void vgic_v3_enable(struct kvm_vcpu *vcpu)
 {
 }
 
+/* check for overlapping regions and for regions crossing the end of memory */
+static bool vgic_v3_check_base(struct kvm *kvm)
+{
+	struct vgic_dist *d = &kvm->arch.vgic;
+	gpa_t redist_size = KVM_VGIC_V3_REDIST_SIZE;
+
+	redist_size *= atomic_read(&kvm->online_vcpus);
+
+	if (d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE < d->vgic_dist_base)
+		return false;
+	if (d->vgic_redist_base + redist_size < d->vgic_redist_base)
+		return false;
+
+	if (d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE <= d->vgic_redist_base)
+		return true;
+	if (d->vgic_redist_base + redist_size <= d->vgic_dist_base)
+		return true;
+
+	return false;
+}
+
+int vgic_v3_map_resources(struct kvm *kvm)
+{
+	int ret = 0;
+	struct vgic_dist *dist = &kvm->arch.vgic;
+
+	if (vgic_ready(kvm))
+		goto out;
+
+	if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) ||
+	    IS_VGIC_ADDR_UNDEF(dist->vgic_redist_base)) {
+		kvm_err("Need to set vgic distributor addresses first\n");
+		ret = -ENXIO;
+		goto out;
+	}
+
+	if (!vgic_v3_check_base(kvm)) {
+		kvm_err("VGIC redist and dist frames overlap\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/*
+	 * For a VGICv3 we require the userland to explicitly initialize
+	 * the VGIC before we need to use it.
+	 */
+	if (!vgic_initialized(kvm)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V3);
+	if (ret) {
+		kvm_err("Unable to register VGICv3 dist MMIO regions\n");
+		goto out;
+	}
+
+	ret = vgic_register_redist_iodevs(kvm, dist->vgic_redist_base);
+	if (ret) {
+		kvm_err("Unable to register VGICv3 redist MMIO regions\n");
+		goto out;
+	}
+
+	dist->ready = true;
+
+out:
+	if (ret)
+		kvm_vgic_destroy(kvm);
+	return ret;
+}
+
 /**
  * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in DT
  * @node:	pointer to the DT node
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index 5951551..7b300ca 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -55,6 +55,7 @@ void vgic_v2_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v2_enable(struct kvm_vcpu *vcpu);
 int vgic_v2_probe(const struct gic_kvm_info *info);
+int vgic_v2_map_resources(struct kvm *kvm);
 int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
 			     enum vgic_type);
 
@@ -68,6 +69,7 @@ void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v3_enable(struct kvm_vcpu *vcpu);
 int vgic_v3_probe(const struct gic_kvm_info *info);
+int vgic_v3_map_resources(struct kvm *kvm);
 int vgic_register_redist_iodevs(struct kvm *kvm, gpa_t dist_base_address);
 #else
 static inline void vgic_v3_process_maintenance(struct kvm_vcpu *vcpu)
@@ -110,6 +112,11 @@ static inline int vgic_v3_probe(const struct gic_kvm_info *info)
 	return -ENODEV;
 }
 
+static inline int vgic_v3_map_resources(struct kvm *kvm)
+{
+	return -ENODEV;
+}
+
 static inline int vgic_register_redist_iodevs(struct kvm *kvm,
 					      gpa_t dist_base_address)
 {
-- 
2.8.2


WARNING: multiple messages have this Message-ID (diff)
From: andre.przywara@arm.com (Andre Przywara)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 53/57] KVM: arm/arm64: vgic-new: vgic_init: implement map_resources
Date: Thu, 19 May 2016 19:08:32 +0100	[thread overview]
Message-ID: <1463681316-23039-54-git-send-email-andre.przywara@arm.com> (raw)
In-Reply-To: <1463681316-23039-1-git-send-email-andre.przywara@arm.com>

From: Eric Auger <eric.auger@linaro.org>

map_resources is the last initialization step. It is executed on
first VCPU run. At that stage the code checks that userspace has provided
the base addresses for the relevant VGIC regions, which depend on the
type of VGIC that is exposed to the guest.  Also we check if the two
regions overlap.
If the checks succeeded, we register the respective register frames with
the kvm_io_bus framework.

If we emulate a GICv2, the function also forces vgic_init execution if
it has not been executed yet. Also we map the virtual GIC CPU interface
onto the guest's CPU interface.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
---
Changelog v3 .. v4:
- add overlap check (moved from kvm_vgic_addr())
- reword commit message
- improve comment

 include/kvm/vgic/vgic.h       |  1 +
 virt/kvm/arm/vgic/vgic-init.c | 28 +++++++++++++++++
 virt/kvm/arm/vgic/vgic-v2.c   | 69 +++++++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic-v3.c   | 71 +++++++++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic.h      |  7 +++++
 5 files changed, 176 insertions(+)

diff --git a/include/kvm/vgic/vgic.h b/include/kvm/vgic/vgic.h
index e7ae36b..17b2a73 100644
--- a/include/kvm/vgic/vgic.h
+++ b/include/kvm/vgic/vgic.h
@@ -201,6 +201,7 @@ int kvm_vgic_create(struct kvm *kvm, u32 type);
 void kvm_vgic_destroy(struct kvm *kvm);
 void kvm_vgic_vcpu_early_init(struct kvm_vcpu *vcpu);
 void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu);
+int kvm_vgic_map_resources(struct kvm *kvm);
 int kvm_vgic_hyp_init(void);
 
 int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int intid,
diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c
index bed3240..a1442f7 100644
--- a/virt/kvm/arm/vgic/vgic-init.c
+++ b/virt/kvm/arm/vgic/vgic-init.c
@@ -323,6 +323,34 @@ int vgic_lazy_init(struct kvm *kvm)
 	return ret;
 }
 
+/* RESOURCE MAPPING */
+
+/**
+ * Map the MMIO regions depending on the VGIC model exposed to the guest
+ * called on the first VCPU run.
+ * Also map the virtual CPU interface into the VM.
+ * v2/v3 derivatives call vgic_init if not already done.
+ * vgic_ready() returns true if this function has succeeded.
+ * @kvm: kvm struct pointer
+ */
+int kvm_vgic_map_resources(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	int ret = 0;
+
+	mutex_lock(&kvm->lock);
+	if (!irqchip_in_kernel(kvm))
+		goto out;
+
+	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2)
+		ret = vgic_v2_map_resources(kvm);
+	else
+		ret = vgic_v3_map_resources(kvm);
+out:
+	mutex_unlock(&kvm->lock);
+	return ret;
+}
+
 /* GENERIC PROBE */
 
 static void vgic_init_maintenance_interrupt(void *info)
diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c
index fcbfa38..1fe031b 100644
--- a/virt/kvm/arm/vgic/vgic-v2.c
+++ b/virt/kvm/arm/vgic/vgic-v2.c
@@ -211,6 +211,75 @@ void vgic_v2_enable(struct kvm_vcpu *vcpu)
 {
 }
 
+/* check for overlapping regions and for regions crossing the end of memory */
+static bool vgic_v2_check_base(gpa_t dist_base, gpa_t cpu_base)
+{
+	if (dist_base + KVM_VGIC_V2_DIST_SIZE < dist_base)
+		return false;
+	if (cpu_base + KVM_VGIC_V2_CPU_SIZE < cpu_base)
+		return false;
+
+	if (dist_base + KVM_VGIC_V2_DIST_SIZE <= cpu_base)
+		return true;
+	if (cpu_base + KVM_VGIC_V2_CPU_SIZE <= dist_base)
+		return true;
+
+	return false;
+}
+
+int vgic_v2_map_resources(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	int ret = 0;
+
+	if (vgic_ready(kvm))
+		goto out;
+
+	if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) ||
+	    IS_VGIC_ADDR_UNDEF(dist->vgic_cpu_base)) {
+		kvm_err("Need to set vgic cpu and dist addresses first\n");
+		ret = -ENXIO;
+		goto out;
+	}
+
+	if (!vgic_v2_check_base(dist->vgic_dist_base, dist->vgic_cpu_base)) {
+		kvm_err("VGIC CPU and dist frames overlap\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/*
+	 * Initialize the vgic if this hasn't already been done on demand by
+	 * accessing the vgic state from userspace.
+	 */
+	ret = vgic_init(kvm);
+	if (ret) {
+		kvm_err("Unable to initialize VGIC dynamic data structures\n");
+		goto out;
+	}
+
+	ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V2);
+	if (ret) {
+		kvm_err("Unable to register VGIC MMIO regions\n");
+		goto out;
+	}
+
+	ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base,
+				    kvm_vgic_global_state.vcpu_base,
+				    KVM_VGIC_V2_CPU_SIZE, true);
+	if (ret) {
+		kvm_err("Unable to remap VGIC CPU to VCPU\n");
+		goto out;
+	}
+
+	dist->ready = true;
+
+out:
+	if (ret)
+		kvm_vgic_destroy(kvm);
+	return ret;
+}
+
 /**
  * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in DT
  * @node:	pointer to the DT node
diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c
index d1c0285..637ff2b 100644
--- a/virt/kvm/arm/vgic/vgic-v3.c
+++ b/virt/kvm/arm/vgic/vgic-v3.c
@@ -191,6 +191,77 @@ void vgic_v3_enable(struct kvm_vcpu *vcpu)
 {
 }
 
+/* check for overlapping regions and for regions crossing the end of memory */
+static bool vgic_v3_check_base(struct kvm *kvm)
+{
+	struct vgic_dist *d = &kvm->arch.vgic;
+	gpa_t redist_size = KVM_VGIC_V3_REDIST_SIZE;
+
+	redist_size *= atomic_read(&kvm->online_vcpus);
+
+	if (d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE < d->vgic_dist_base)
+		return false;
+	if (d->vgic_redist_base + redist_size < d->vgic_redist_base)
+		return false;
+
+	if (d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE <= d->vgic_redist_base)
+		return true;
+	if (d->vgic_redist_base + redist_size <= d->vgic_dist_base)
+		return true;
+
+	return false;
+}
+
+int vgic_v3_map_resources(struct kvm *kvm)
+{
+	int ret = 0;
+	struct vgic_dist *dist = &kvm->arch.vgic;
+
+	if (vgic_ready(kvm))
+		goto out;
+
+	if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) ||
+	    IS_VGIC_ADDR_UNDEF(dist->vgic_redist_base)) {
+		kvm_err("Need to set vgic distributor addresses first\n");
+		ret = -ENXIO;
+		goto out;
+	}
+
+	if (!vgic_v3_check_base(kvm)) {
+		kvm_err("VGIC redist and dist frames overlap\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/*
+	 * For a VGICv3 we require the userland to explicitly initialize
+	 * the VGIC before we need to use it.
+	 */
+	if (!vgic_initialized(kvm)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V3);
+	if (ret) {
+		kvm_err("Unable to register VGICv3 dist MMIO regions\n");
+		goto out;
+	}
+
+	ret = vgic_register_redist_iodevs(kvm, dist->vgic_redist_base);
+	if (ret) {
+		kvm_err("Unable to register VGICv3 redist MMIO regions\n");
+		goto out;
+	}
+
+	dist->ready = true;
+
+out:
+	if (ret)
+		kvm_vgic_destroy(kvm);
+	return ret;
+}
+
 /**
  * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in DT
  * @node:	pointer to the DT node
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index 5951551..7b300ca 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -55,6 +55,7 @@ void vgic_v2_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v2_enable(struct kvm_vcpu *vcpu);
 int vgic_v2_probe(const struct gic_kvm_info *info);
+int vgic_v2_map_resources(struct kvm *kvm);
 int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
 			     enum vgic_type);
 
@@ -68,6 +69,7 @@ void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v3_enable(struct kvm_vcpu *vcpu);
 int vgic_v3_probe(const struct gic_kvm_info *info);
+int vgic_v3_map_resources(struct kvm *kvm);
 int vgic_register_redist_iodevs(struct kvm *kvm, gpa_t dist_base_address);
 #else
 static inline void vgic_v3_process_maintenance(struct kvm_vcpu *vcpu)
@@ -110,6 +112,11 @@ static inline int vgic_v3_probe(const struct gic_kvm_info *info)
 	return -ENODEV;
 }
 
+static inline int vgic_v3_map_resources(struct kvm *kvm)
+{
+	return -ENODEV;
+}
+
 static inline int vgic_register_redist_iodevs(struct kvm *kvm,
 					      gpa_t dist_base_address)
 {
-- 
2.8.2

  parent reply	other threads:[~2016-05-19 18:09 UTC|newest]

Thread overview: 118+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-19 18:07 [PATCH v5 00/57] KVM: arm/arm64: Rework virtual GIC emulation Andre Przywara
2016-05-19 18:07 ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 01/57] KVM: arm/arm64: vgic: streamline vgic_update_irq_pending() interface Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 02/57] KVM: arm/arm64: vgic: avoid map in kvm_vgic_inject_mapped_irq() Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 03/57] KVM: arm/arm64: vgic: avoid map in kvm_vgic_map_is_active() Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 04/57] KVM: arm/arm64: vgic: avoid map in kvm_vgic_unmap_phys_irq() Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 05/57] KVM: arm/arm64: Remove the IRQ field from struct irq_phys_map Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 06/57] KVM: arm/arm64: arch_timer: Remove irq_phys_map Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 07/57] KVM: arm/arm64: vgic: Remove irq_phys_map from interface Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 08/57] KVM: arm/arm64: Move timer IRQ map to latest possible time Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 09/57] KVM: arm/arm64: Get rid of vgic_cpu->nr_lr Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 10/57] KVM: arm/arm64: Fix MMIO emulation data handling Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 11/57] KVM: arm/arm64: Export mmio_read/write_bus Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 12/57] KVM: arm/arm64: pmu: abstract access to number of SPIs Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 13/57] KVM: arm/arm64: Provide functionality to pause and resume a guest Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 14/57] KVM: arm/arm64: move GICv2 emulation defines into arm-gic-v3.h Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 15/57] KVM: arm/arm64: vgic-new: Add data structure definitions Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 16/57] KVM: arm/arm64: vgic-new: Add acccessor to new struct vgic_irq instance Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 17/57] KVM: arm/arm64: vgic-new: Implement virtual IRQ injection Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 18/57] KVM: arm/arm64: vgic-new: Add IRQ sorting Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 19/57] KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:07 ` [PATCH v5 20/57] KVM: arm/arm64: vgic-new: Add GICv2 world switch backend Andre Przywara
2016-05-19 18:07   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 21/57] KVM: arm/arm64: vgic-new: Add GICv3 " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 22/57] KVM: arm/arm64: vgic-new: Implement kvm_vgic_vcpu_pending_irq Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 23/57] KVM: arm/arm64: vgic-new: Add MMIO handling framework Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 24/57] KVM: arm/arm64: vgic-new: Add GICv2 " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 25/57] KVM: arm/arm64: vgic-new: Add CTLR, TYPER and IIDR handlers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 26/57] KVM: arm/arm64: vgic-new: Add ENABLE registers handlers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 27/57] KVM: arm/arm64: vgic-new: Add PENDING " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 28/57] KVM: arm/arm64: vgic-new: Add ACTIVE " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 29/57] KVM: arm/arm64: vgic-new: Add PRIORITY " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 30/57] KVM: arm/arm64: vgic-new: Add CONFIG " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 31/57] KVM: arm/arm64: vgic-new: Add TARGET " Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 32/57] KVM: arm/arm64: vgic-new: Add SGIR register handler Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 33/57] KVM: arm/arm64: vgic-new: Add SGIPENDR register handlers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 34/57] KVM: arm/arm64: vgic-new: Add GICv3 MMIO handling framework Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 35/57] KVM: arm/arm64: vgic-new: Add GICv3 CTLR, IIDR, TYPER handlers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 36/57] KVM: arm/arm64: vgic-new: Add GICv3 redistributor IIDR and TYPER handler Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 37/57] KVM: arm/arm64: vgic-new: Add GICv3 IDREGS register handler Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 38/57] KVM: arm/arm64: vgic-new: Add GICv3 IROUTER register handlers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 39/57] KVM: arm/arm64: vgic-new: Add GICv3 SGI system register trap handler Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 40/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM device ops registration Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 41/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_NR_IRQS Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 42/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_CTRL Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 43/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: implement kvm_vgic_addr Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 44/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_ADDR Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 45/57] KVM: arm/arm64: vgic-new: vgic_kvm_device: access to VGIC registers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 46/57] KVM: arm/arm64: vgic-new: Export register access interface Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 47/57] KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registers Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 48/57] KVM: arm/arm64: vgic-new: Add GICH_VMCR accessors Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 49/57] KVM: arm/arm64: vgic-new: Add userland GIC CPU interface access Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 50/57] KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 51/57] KVM: arm/arm64: vgic-new: vgic_init: implement vgic_create Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 52/57] KVM: arm/arm64: vgic-new: vgic_init: implement vgic_init Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` Andre Przywara [this message]
2016-05-19 18:08   ` [PATCH v5 53/57] KVM: arm/arm64: vgic-new: vgic_init: implement map_resources Andre Przywara
2016-05-19 18:08 ` [PATCH v5 54/57] KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enable Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 55/57] KVM: arm/arm64: vgic-new: Wire up irqfd injection Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 56/57] KVM: arm/arm64: vgic-new: implement mapped IRQ handling Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-19 18:08 ` [PATCH v5 57/57] KVM: arm/arm64: vgic-new: enable build Andre Przywara
2016-05-19 18:08   ` Andre Przywara
2016-05-20 15:04 ` [PATCH v5 00/57] KVM: arm/arm64: Rework virtual GIC emulation Christoffer Dall
2016-05-20 15:04   ` Christoffer Dall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463681316-23039-54-git-send-email-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=eric.auger@linaro.org \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.