From: Krzysztof Kozlowski <k.kozlowski@samsung.com> To: Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <k.kozlowski@samsung.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@codeaurora.org>, Javier Martinez Canillas <javier@osg.samsung.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Subject: [PATCH 3/3] ARM: dts: exynos: Add watchdog amd Security SubSystem to Exynos5410 Date: Wed, 01 Jun 2016 11:45:51 +0200 [thread overview] Message-ID: <1464774351-23604-3-git-send-email-k.kozlowski@samsung.com> (raw) In-Reply-To: <1464774351-23604-1-git-send-email-k.kozlowski@samsung.com> Move watchdog and Security SubSystem nodes from exynos5420.dtsi to file shared with Exynos5410 and configure the clocks on the latter. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- arch/arm/boot/dts/exynos5410.dtsi | 11 +++++++++++ arch/arm/boot/dts/exynos5420.dtsi | 28 +++++++++++----------------- arch/arm/boot/dts/exynos54xx.dtsi | 12 ++++++++++++ 3 files changed, 34 insertions(+), 17 deletions(-) diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index f1effd3f03c4..b76f56c2fe8b 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -297,6 +297,11 @@ clock-names = "uart", "clk_uart_baud0"; }; +&sss { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + &sromc { #address-cells = <2>; #size-cells = <1>; @@ -349,4 +354,10 @@ samsung,pmureg-phandle = <&pmu_system_controller>; }; +&watchdog { + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + #include "exynos5410-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 265747bb19d1..beb6f453039e 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -694,23 +694,6 @@ #include "exynos4412-tmu-sensor-conf.dtsi" }; - watchdog: watchdog@101D0000 { - compatible = "samsung,exynos5420-wdt"; - reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; - clocks = <&clock CLK_WDT>; - clock-names = "watchdog"; - samsung,syscon-phandle = <&pmu_system_controller>; - }; - - sss: sss@10830000 { - compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x300>; - interrupts = <0 112 0>; - clocks = <&clock CLK_SSS>; - clock-names = "secss"; - }; - sysmmu_g2dr: sysmmu@0x10A60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x10A60000 0x1000>; @@ -1030,6 +1013,11 @@ clock-names = "uart", "clk_uart_baud0"; }; +&sss { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + &usbdrd3_0 { clocks = <&clock CLK_USBD300>; clock-names = "usbdrd30"; @@ -1073,4 +1061,10 @@ samsung,pmureg-phandle = <&pmu_system_controller>; }; +&watchdog { + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + #include "exynos5420-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 0eb8aa31b7d9..06a604911e87 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -74,6 +74,18 @@ }; }; + watchdog: watchdog@101d0000 { + compatible = "samsung,exynos5420-wdt"; + reg = <0x101d0000 0x100>; + interrupts = <0 42 0>; + }; + + sss: sss@10830000 { + compatible = "samsung,exynos4210-secss"; + reg = <0x10830000 0x300>; + interrupts = <0 112 0>; + }; + /* i2c_0-3 are defined in exynos5.dtsi */ hsi2c_4: i2c@12ca0000 { compatible = "samsung,exynos5250-hsi2c"; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski@samsung.com (Krzysztof Kozlowski) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/3] ARM: dts: exynos: Add watchdog amd Security SubSystem to Exynos5410 Date: Wed, 01 Jun 2016 11:45:51 +0200 [thread overview] Message-ID: <1464774351-23604-3-git-send-email-k.kozlowski@samsung.com> (raw) In-Reply-To: <1464774351-23604-1-git-send-email-k.kozlowski@samsung.com> Move watchdog and Security SubSystem nodes from exynos5420.dtsi to file shared with Exynos5410 and configure the clocks on the latter. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- arch/arm/boot/dts/exynos5410.dtsi | 11 +++++++++++ arch/arm/boot/dts/exynos5420.dtsi | 28 +++++++++++----------------- arch/arm/boot/dts/exynos54xx.dtsi | 12 ++++++++++++ 3 files changed, 34 insertions(+), 17 deletions(-) diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index f1effd3f03c4..b76f56c2fe8b 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -297,6 +297,11 @@ clock-names = "uart", "clk_uart_baud0"; }; +&sss { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + &sromc { #address-cells = <2>; #size-cells = <1>; @@ -349,4 +354,10 @@ samsung,pmureg-phandle = <&pmu_system_controller>; }; +&watchdog { + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + #include "exynos5410-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 265747bb19d1..beb6f453039e 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -694,23 +694,6 @@ #include "exynos4412-tmu-sensor-conf.dtsi" }; - watchdog: watchdog at 101D0000 { - compatible = "samsung,exynos5420-wdt"; - reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; - clocks = <&clock CLK_WDT>; - clock-names = "watchdog"; - samsung,syscon-phandle = <&pmu_system_controller>; - }; - - sss: sss at 10830000 { - compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x300>; - interrupts = <0 112 0>; - clocks = <&clock CLK_SSS>; - clock-names = "secss"; - }; - sysmmu_g2dr: sysmmu at 0x10A60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x10A60000 0x1000>; @@ -1030,6 +1013,11 @@ clock-names = "uart", "clk_uart_baud0"; }; +&sss { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + &usbdrd3_0 { clocks = <&clock CLK_USBD300>; clock-names = "usbdrd30"; @@ -1073,4 +1061,10 @@ samsung,pmureg-phandle = <&pmu_system_controller>; }; +&watchdog { + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + #include "exynos5420-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 0eb8aa31b7d9..06a604911e87 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -74,6 +74,18 @@ }; }; + watchdog: watchdog at 101d0000 { + compatible = "samsung,exynos5420-wdt"; + reg = <0x101d0000 0x100>; + interrupts = <0 42 0>; + }; + + sss: sss at 10830000 { + compatible = "samsung,exynos4210-secss"; + reg = <0x10830000 0x300>; + interrupts = <0 112 0>; + }; + /* i2c_0-3 are defined in exynos5.dtsi */ hsi2c_4: i2c at 12ca0000 { compatible = "samsung,exynos5250-hsi2c"; -- 1.9.1
next prev parent reply other threads:[~2016-06-01 9:48 UTC|newest] Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-01 9:45 [PATCH 1/3] dt-bindings: clock: Add watchdog and SSS clock IDs to Exynos5410 Krzysztof Kozlowski 2016-06-01 9:45 ` Krzysztof Kozlowski 2016-06-01 9:45 ` [PATCH 2/3] clk: samsung: exynos5410: Add WDT, ACLK266 and SSS clocks Krzysztof Kozlowski 2016-06-01 9:45 ` Krzysztof Kozlowski 2016-06-01 14:55 ` Javier Martinez Canillas 2016-06-01 14:55 ` Javier Martinez Canillas 2016-06-02 9:20 ` Sylwester Nawrocki 2016-06-02 9:20 ` Sylwester Nawrocki 2016-06-06 11:02 ` Sylwester Nawrocki 2016-06-06 11:02 ` Sylwester Nawrocki 2016-06-06 11:02 ` Sylwester Nawrocki 2016-06-06 11:13 ` Krzysztof Kozlowski 2016-06-06 11:13 ` Krzysztof Kozlowski 2016-06-01 9:45 ` Krzysztof Kozlowski [this message] 2016-06-01 9:45 ` [PATCH 3/3] ARM: dts: exynos: Add watchdog amd Security SubSystem to Exynos5410 Krzysztof Kozlowski 2016-06-01 15:16 ` Javier Martinez Canillas 2016-06-01 15:16 ` Javier Martinez Canillas 2016-06-02 6:18 ` Krzysztof Kozlowski 2016-06-02 6:18 ` Krzysztof Kozlowski 2016-06-02 13:27 ` Javier Martinez Canillas 2016-06-02 13:27 ` Javier Martinez Canillas 2016-06-01 14:53 ` [PATCH 1/3] dt-bindings: clock: Add watchdog and SSS clock IDs " Javier Martinez Canillas 2016-06-01 14:53 ` Javier Martinez Canillas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1464774351-23604-3-git-send-email-k.kozlowski@samsung.com \ --to=k.kozlowski@samsung.com \ --cc=b.zolnierkie@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=javier@osg.samsung.com \ --cc=kgene@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=s.nawrocki@samsung.com \ --cc=sboyd@codeaurora.org \ --cc=tomasz.figa@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.