[PATCH v8 7/8] ARM: dts: stm32: add Timers driver for stm32f429 MCU

[Benjamin Gaignard <benjamin.gaignard@linaro.org>]

Add Timers and it sub-nodes into DT for stm32f429 family.

version 6:
- split patch in two: one for SoC family and one for stm32f469
  discovery board.

version 5:
- rename gptimer node to timers
- re-order timers node par addresses

version 4:
- remove unwanted indexing in pwm@ and timer@ node name
- use "reg" instead of additional parameters to set timer
  configuration

version 3:
- use "st,stm32-timer-trigger" in DT

version 2:
- use parameters to describe hardware capabilities
- do not use references for pwm and iio timer subnodes

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 275 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 275 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index e4dae0e..2f85691 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -355,6 +355,21 @@
 					slew-rate = <2>;
 				};
 			};
+
+			pwm1_pins: pwm@1 {
+				pins {
+					pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
+						 <STM32F429_PB13_FUNC_TIM1_CH1N>,
+						 <STM32F429_PB12_FUNC_TIM1_BKIN>;
+				};
+			};
+
+			pwm3_pins: pwm@3 {
+				pins {
+					pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
+						 <STM32F429_PB5_FUNC_TIM3_CH2>;
+				};
+			};
 		};
 
 		rcc: rcc@40023810 {
@@ -426,6 +441,266 @@
 			interrupts = <80>;
 			clocks = <&rcc 0 38>;
 		};
+
+		timers2: timers@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000000 0x400>;
+			clocks = <&rcc 0 128>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@1 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+		};
+
+		timers3: timers@40000400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000400 0x400>;
+			clocks = <&rcc 0 129>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@2 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		timers4: timers@40000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000800 0x400>;
+			clocks = <&rcc 0 130>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@3 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <3>;
+				status = "disabled";
+			};
+		};
+
+		timers5: timers@40000c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000C00 0x400>;
+			clocks = <&rcc 0 131>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@4 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <4>;
+				status = "disabled";
+			};
+		};
+
+		timers6: timers@40001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001000 0x400>;
+			clocks = <&rcc 0 132>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@5 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		timers7: timers@40001400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001400 0x400>;
+			clocks = <&rcc 0 133>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@6 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <6>;
+				status = "disabled";
+			};
+		};
+
+		timers12: timers@40001800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001800 0x400>;
+			clocks = <&rcc 0 134>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@11 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <11>;
+				status = "disabled";
+			};
+		};
+
+		timers13: timers@40001c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001C00 0x400>;
+			clocks = <&rcc 0 135>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+		};
+
+		timers14: timers@40002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40002000 0x400>;
+			clocks = <&rcc 0 136>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+		};
+
+		timers1: timers@40010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010000 0x400>;
+			clocks = <&rcc 0 160>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@0 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+		};
+
+		timers8: timers@40010400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010400 0x400>;
+			clocks = <&rcc 0 161>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@7 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <7>;
+				status = "disabled";
+			};
+		};
+
+		timers9: timers@40014000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014000 0x400>;
+			clocks = <&rcc 0 176>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@8 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <8>;
+				status = "disabled";
+			};
+		};
+
+		timers10: timers@40014400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014400 0x400>;
+			clocks = <&rcc 0 177>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+		};
+
+		timers11: timers@40014800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014800 0x400>;
+			clocks = <&rcc 0 178>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+		};
 	};
 };
 
-- 
1.9.1