All of lore.kernel.org
 help / color / mirror / Atom feed
From: Erik Stromdahl <erik.stromdahl@gmail.com>
To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org,
	ath10k@lists.infradead.org
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [RFC v4 09/21] ath10k: htc: ready_ext msg support
Date: Tue, 21 Feb 2017 17:15:29 +0100	[thread overview]
Message-ID: <1487693741-10042-10-git-send-email-erik.stromdahl@gmail.com> (raw)
In-Reply-To: <1487693741-10042-1-git-send-email-erik.stromdahl@gmail.com>

Added support for extended ready message.
The extended ready message contains the maximum bundle
count supported by SDIO chipsets.

It is transmitted by SDIO chipset only and replaces the
"standard" ready message in this case.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
---
 drivers/net/wireless/ath/ath10k/htc.c | 28 ++++++++++++++++++++++------
 drivers/net/wireless/ath/ath10k/htc.h |  5 +++++
 2 files changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index eb036b3..3eaa9a8 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -581,8 +581,6 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 	unsigned long time_left;
 	struct ath10k_htc_msg *msg;
 	u16 message_id;
-	u16 credit_count;
-	u16 credit_size;
 
 	time_left = wait_for_completion_timeout(&htc->ctl_resp,
 						ATH10K_HTC_WAIT_TIMEOUT_HZ);
@@ -619,16 +617,14 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 
 	msg = (struct ath10k_htc_msg *)htc->control_resp_buffer;
 	message_id   = __le16_to_cpu(msg->hdr.message_id);
-	credit_count = __le16_to_cpu(msg->ready.credit_count);
-	credit_size  = __le16_to_cpu(msg->ready.credit_size);
 
 	if (message_id != ATH10K_HTC_MSG_READY_ID) {
 		ath10k_err(ar, "Invalid HTC ready msg: 0x%x\n", message_id);
 		return -ECOMM;
 	}
 
-	htc->total_transmit_credits = credit_count;
-	htc->target_credit_size = credit_size;
+	htc->total_transmit_credits = __le16_to_cpu(msg->ready.credit_count);
+	htc->target_credit_size = __le16_to_cpu(msg->ready.credit_size);
 
 	ath10k_dbg(ar, ATH10K_DBG_HTC,
 		   "Target ready! transmit resources: %d size:%d\n",
@@ -641,6 +637,19 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 		return -ECOMM;
 	}
 
+	/* The only way to determine if the ready message is an extended
+	 * message is from the size.
+	 */
+	if (htc->control_resp_len >=
+	    sizeof(msg->hdr) + sizeof(msg->ready_ext)) {
+		htc->max_msgs_per_htc_bundle =
+			min_t(u8, msg->ready_ext.max_msgs_per_htc_bundle,
+			      HTC_HOST_MAX_MSG_PER_BUNDLE);
+		ath10k_dbg(ar, ATH10K_DBG_HTC,
+			   "Extended ready message. RX bundle size: %d\n",
+			   htc->max_msgs_per_htc_bundle);
+	}
+
 	return 0;
 }
 
@@ -836,6 +845,13 @@ int ath10k_htc_start(struct ath10k_htc *htc)
 	msg->hdr.message_id =
 		__cpu_to_le16(ATH10K_HTC_MSG_SETUP_COMPLETE_EX_ID);
 
+	if (ar->hif.bus == ATH10K_BUS_SDIO) {
+		/* Extra setup params used by SDIO */
+		msg->setup_complete_ext.flags =
+			__cpu_to_le32(ATH10K_HTC_SETUP_COMPLETE_FLAGS_RX_BNDL_EN);
+		msg->setup_complete_ext.max_msgs_per_bundled_recv =
+			htc->max_msgs_per_htc_bundle;
+	}
 	ath10k_dbg(ar, ATH10K_DBG_HTC, "HTC is using TX credit flow control\n");
 
 	status = ath10k_htc_send(htc, ATH10K_HTC_EP_0, skb);
diff --git a/drivers/net/wireless/ath/ath10k/htc.h b/drivers/net/wireless/ath/ath10k/htc.h
index 9a1db90..566e437 100644
--- a/drivers/net/wireless/ath/ath10k/htc.h
+++ b/drivers/net/wireless/ath/ath10k/htc.h
@@ -112,6 +112,10 @@ enum ath10k_htc_conn_svc_status {
 	ATH10K_HTC_CONN_SVC_STATUS_NO_MORE_EP   = 4
 };
 
+enum ath10k_htc_setup_complete_flags {
+	ATH10K_HTC_SETUP_COMPLETE_FLAGS_RX_BNDL_EN = 1
+};
+
 struct ath10k_ath10k_htc_msg_hdr {
 	__le16 message_id; /* @enum htc_message_id */
 } __packed;
@@ -360,6 +364,7 @@ struct ath10k_htc {
 
 	int total_transmit_credits;
 	int target_credit_size;
+	u8 max_msgs_per_htc_bundle;
 };
 
 int ath10k_htc_init(struct ath10k *ar);
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Erik Stromdahl <erik.stromdahl@gmail.com>
To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org,
	ath10k@lists.infradead.org
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [RFC v4 09/21] ath10k: htc: ready_ext msg support
Date: Tue, 21 Feb 2017 17:15:29 +0100	[thread overview]
Message-ID: <1487693741-10042-10-git-send-email-erik.stromdahl@gmail.com> (raw)
In-Reply-To: <1487693741-10042-1-git-send-email-erik.stromdahl@gmail.com>

Added support for extended ready message.
The extended ready message contains the maximum bundle
count supported by SDIO chipsets.

It is transmitted by SDIO chipset only and replaces the
"standard" ready message in this case.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
---
 drivers/net/wireless/ath/ath10k/htc.c | 28 ++++++++++++++++++++++------
 drivers/net/wireless/ath/ath10k/htc.h |  5 +++++
 2 files changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index eb036b3..3eaa9a8 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -581,8 +581,6 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 	unsigned long time_left;
 	struct ath10k_htc_msg *msg;
 	u16 message_id;
-	u16 credit_count;
-	u16 credit_size;
 
 	time_left = wait_for_completion_timeout(&htc->ctl_resp,
 						ATH10K_HTC_WAIT_TIMEOUT_HZ);
@@ -619,16 +617,14 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 
 	msg = (struct ath10k_htc_msg *)htc->control_resp_buffer;
 	message_id   = __le16_to_cpu(msg->hdr.message_id);
-	credit_count = __le16_to_cpu(msg->ready.credit_count);
-	credit_size  = __le16_to_cpu(msg->ready.credit_size);
 
 	if (message_id != ATH10K_HTC_MSG_READY_ID) {
 		ath10k_err(ar, "Invalid HTC ready msg: 0x%x\n", message_id);
 		return -ECOMM;
 	}
 
-	htc->total_transmit_credits = credit_count;
-	htc->target_credit_size = credit_size;
+	htc->total_transmit_credits = __le16_to_cpu(msg->ready.credit_count);
+	htc->target_credit_size = __le16_to_cpu(msg->ready.credit_size);
 
 	ath10k_dbg(ar, ATH10K_DBG_HTC,
 		   "Target ready! transmit resources: %d size:%d\n",
@@ -641,6 +637,19 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 		return -ECOMM;
 	}
 
+	/* The only way to determine if the ready message is an extended
+	 * message is from the size.
+	 */
+	if (htc->control_resp_len >=
+	    sizeof(msg->hdr) + sizeof(msg->ready_ext)) {
+		htc->max_msgs_per_htc_bundle =
+			min_t(u8, msg->ready_ext.max_msgs_per_htc_bundle,
+			      HTC_HOST_MAX_MSG_PER_BUNDLE);
+		ath10k_dbg(ar, ATH10K_DBG_HTC,
+			   "Extended ready message. RX bundle size: %d\n",
+			   htc->max_msgs_per_htc_bundle);
+	}
+
 	return 0;
 }
 
@@ -836,6 +845,13 @@ int ath10k_htc_start(struct ath10k_htc *htc)
 	msg->hdr.message_id =
 		__cpu_to_le16(ATH10K_HTC_MSG_SETUP_COMPLETE_EX_ID);
 
+	if (ar->hif.bus == ATH10K_BUS_SDIO) {
+		/* Extra setup params used by SDIO */
+		msg->setup_complete_ext.flags =
+			__cpu_to_le32(ATH10K_HTC_SETUP_COMPLETE_FLAGS_RX_BNDL_EN);
+		msg->setup_complete_ext.max_msgs_per_bundled_recv =
+			htc->max_msgs_per_htc_bundle;
+	}
 	ath10k_dbg(ar, ATH10K_DBG_HTC, "HTC is using TX credit flow control\n");
 
 	status = ath10k_htc_send(htc, ATH10K_HTC_EP_0, skb);
diff --git a/drivers/net/wireless/ath/ath10k/htc.h b/drivers/net/wireless/ath/ath10k/htc.h
index 9a1db90..566e437 100644
--- a/drivers/net/wireless/ath/ath10k/htc.h
+++ b/drivers/net/wireless/ath/ath10k/htc.h
@@ -112,6 +112,10 @@ enum ath10k_htc_conn_svc_status {
 	ATH10K_HTC_CONN_SVC_STATUS_NO_MORE_EP   = 4
 };
 
+enum ath10k_htc_setup_complete_flags {
+	ATH10K_HTC_SETUP_COMPLETE_FLAGS_RX_BNDL_EN = 1
+};
+
 struct ath10k_ath10k_htc_msg_hdr {
 	__le16 message_id; /* @enum htc_message_id */
 } __packed;
@@ -360,6 +364,7 @@ struct ath10k_htc {
 
 	int total_transmit_credits;
 	int target_credit_size;
+	u8 max_msgs_per_htc_bundle;
 };
 
 int ath10k_htc_init(struct ath10k *ar);
-- 
2.7.4


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2017-02-21 16:16 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-21 16:15 [RFC v4 00/21] ath10k sdio and usb support Erik Stromdahl
2017-02-21 16:15 ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 01/21] ath10k: htc: made static function public Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 02/21] ath10k: htc: rx trailer lookahead support Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 03/21] ath10k: htc: move htc ctrl ep connect to htc_init Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 04/21] ath10k: htc: refactorization Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 05/21] ath10k: various sdio related definitions Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 06/21] ath10k: sdio support Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-03-10 12:11   ` Valo, Kalle
2017-03-10 12:11     ` Valo, Kalle
2017-03-10 12:43     ` Valo, Kalle
2017-03-10 12:43       ` Valo, Kalle
2017-03-10 16:29       ` Erik Stromdahl
2017-03-10 16:29         ` Erik Stromdahl
2017-03-11 10:36         ` Erik Stromdahl
2017-03-11 10:36           ` Erik Stromdahl
2017-03-11 15:04           ` Kalle Valo
2017-03-11 15:04             ` Kalle Valo
2017-03-11 19:10             ` Erik Stromdahl
2017-03-11 19:10               ` Erik Stromdahl
2017-03-15 12:09         ` Kalle Valo
2017-03-15 12:09           ` Kalle Valo
2017-03-15 18:01           ` Erik Stromdahl
2017-03-15 18:01             ` Erik Stromdahl
2017-03-16  9:33             ` Kalle Valo
2017-03-16  9:33               ` Kalle Valo
2017-03-17 15:54               ` Erik Stromdahl
2017-03-17 15:54                 ` Erik Stromdahl
2017-03-23 16:10                 ` Kalle Valo
2017-03-23 16:10                   ` Kalle Valo
2017-02-21 16:15 ` [RFC v4 07/21] ath10k: add sdio extra initializations Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 08/21] ath10k: sdio get target info Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` Erik Stromdahl [this message]
2017-02-21 16:15   ` [RFC v4 09/21] ath10k: htc: ready_ext msg support Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 10/21] ath10k: various usb related definitions Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 11/21] ath10k: usb support Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 12/21] ath10k: high_latency detection Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 13/21] ath10k: different fw file names for usb and sdio Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 14/21] ath10k: htt: RX ring config HL support Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 15/21] ath10k: per target configurablity of various items Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 16/21] ath10k: add start_once support Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 17/21] ath10k: htt: High latency TX support Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 18/21] ath10k: htt: High latency RX support Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 19/21] ath10k: add QCA9377 usb hw_param item Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 20/21] ath10k: add QCA9377 sdio " Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl
2017-02-21 16:15 ` [RFC v4 21/21] ath10k: dma fixes for high latency devices Erik Stromdahl
2017-02-21 16:15   ` Erik Stromdahl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1487693741-10042-10-git-send-email-erik.stromdahl@gmail.com \
    --to=erik.stromdahl@gmail.com \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@qca.qualcomm.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.