From: Leo Yan <leo.yan@linaro.org> To: Jonathan Corbet <corbet@lwn.net>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Wei Xu <xuwei5@hisilicon.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will.deacon@arm.com>, Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>, Mathieu Poirier <mathieu.poirier@linaro.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Suzuki K Poulose <suzuki.poulose@arm.com>, Stephen Boyd <sboyd@codeaurora.org>, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, Mike Leach <mike.leach@linaro.org>, Sudeep Holla <sudeep.holla@arm.com> Cc: Leo Yan <leo.yan@linaro.org> Subject: [PATCH v8 7/7] arm64: dts: qcom: msm8916: Add debug unit Date: Tue, 2 May 2017 18:08:37 +0800 [thread overview] Message-ID: <1493719717-27698-8-git-send-email-leo.yan@linaro.org> (raw) In-Reply-To: <1493719717-27698-1-git-send-email-leo.yan@linaro.org> Add debug unit on Qualcomm msm8916 based platforms, including the DragonBoard 410c board. Signed-off-by: Leo Yan <leo.yan@linaro.org> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 68a8e67..3af814b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1104,6 +1104,38 @@ }; }; + debug@850000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0x850000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU0>; + }; + + debug@852000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0x852000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU1>; + }; + + debug@854000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0x854000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU2>; + }; + + debug@856000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0x856000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU3>; + }; + etm@85c000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x85c000 0x1000>; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: leo.yan@linaro.org (Leo Yan) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 7/7] arm64: dts: qcom: msm8916: Add debug unit Date: Tue, 2 May 2017 18:08:37 +0800 [thread overview] Message-ID: <1493719717-27698-8-git-send-email-leo.yan@linaro.org> (raw) In-Reply-To: <1493719717-27698-1-git-send-email-leo.yan@linaro.org> Add debug unit on Qualcomm msm8916 based platforms, including the DragonBoard 410c board. Signed-off-by: Leo Yan <leo.yan@linaro.org> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 68a8e67..3af814b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1104,6 +1104,38 @@ }; }; + debug at 850000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0x850000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU0>; + }; + + debug at 852000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0x852000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU1>; + }; + + debug at 854000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0x854000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU2>; + }; + + debug at 856000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0x856000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU3>; + }; + etm at 85c000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x85c000 0x1000>; -- 2.7.4
next prev parent reply other threads:[~2017-05-02 10:08 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-05-02 10:08 [PATCH v8 0/7] coresight: enable debug module Leo Yan 2017-05-02 10:08 ` Leo Yan 2017-05-02 10:08 ` [PATCH v8 1/7] coresight: bindings for CPU " Leo Yan 2017-05-02 10:08 ` Leo Yan 2017-05-02 10:08 ` [PATCH v8 2/7] doc: Add documentation for Coresight CPU debug Leo Yan 2017-05-02 10:08 ` Leo Yan [not found] ` <1493719717-27698-3-git-send-email-leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2017-05-03 22:29 ` Mathieu Poirier 2017-05-03 22:29 ` Mathieu Poirier 2017-05-03 22:29 ` Mathieu Poirier 2017-05-09 2:55 ` Leo Yan 2017-05-09 2:55 ` Leo Yan [not found] ` <1493719717-27698-1-git-send-email-leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2017-05-02 10:08 ` [PATCH v8 3/7] coresight: of_get_coresight_platform_data: Add missing of_node_put Leo Yan 2017-05-02 10:08 ` Leo Yan 2017-05-02 10:08 ` Leo Yan 2017-05-02 10:08 ` [PATCH v8 5/7] coresight: add support for CPU debug module Leo Yan 2017-05-02 10:08 ` Leo Yan 2017-05-02 10:08 ` Leo Yan 2017-05-03 22:24 ` Mathieu Poirier 2017-05-03 22:24 ` Mathieu Poirier 2017-05-05 13:55 ` Sudeep Holla 2017-05-05 13:55 ` Sudeep Holla 2017-05-05 14:48 ` Mathieu Poirier 2017-05-05 14:48 ` Mathieu Poirier 2017-05-05 15:04 ` Sudeep Holla 2017-05-05 15:04 ` Sudeep Holla 2017-05-05 15:34 ` Mathieu Poirier 2017-05-05 15:34 ` Mathieu Poirier 2017-05-05 15:34 ` Mathieu Poirier 2017-05-02 10:08 ` [PATCH v8 4/7] coresight: refactor with function of_coresight_get_cpu Leo Yan 2017-05-02 10:08 ` Leo Yan 2017-05-02 10:08 ` [PATCH v8 6/7] arm64: dts: hi6220: register debug module Leo Yan 2017-05-02 10:08 ` Leo Yan 2017-05-02 10:08 ` Leo Yan [this message] 2017-05-02 10:08 ` [PATCH v8 7/7] arm64: dts: qcom: msm8916: Add debug unit Leo Yan
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1493719717-27698-8-git-send-email-leo.yan@linaro.org \ --to=leo.yan@linaro.org \ --cc=andy.gross@linaro.org \ --cc=catalin.marinas@arm.com \ --cc=corbet@lwn.net \ --cc=david.brown@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-soc@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mathieu.poirier@linaro.org \ --cc=mike.leach@linaro.org \ --cc=robh+dt@kernel.org \ --cc=sboyd@codeaurora.org \ --cc=sudeep.holla@arm.com \ --cc=suzuki.poulose@arm.com \ --cc=will.deacon@arm.com \ --cc=xuwei5@hisilicon.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.