From: David Wu <david.wu@rock-chips.com> To: thierry.reding@gmail.com, heiko@sntech.de, boris.brezillon@free-electrons.com, robh+dt@kernel.org Cc: catalin.marinas@arm.com, briannorris@chromium.org, dianders@chromium.org, mark.rutland@arm.com, huangtao@rock-chips.com, linux-pwm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, David Wu <david.wu@rock-chips.com> Subject: [PATCH 5/5] Arm64: dts: rockchip: Add pwm nodes for rk3328 Date: Thu, 29 Jun 2017 20:34:10 +0800 [thread overview] Message-ID: <1498739650-27774-1-git-send-email-david.wu@rock-chips.com> (raw) In-Reply-To: <1498739271-27431-1-git-send-email-david.wu@rock-chips.com> There are 4 pwm channels built in rk3328 soc, need to configure the both APB clock and bus clock. Signed-off-by: David Wu <david.wu@rock-chips.com> --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 45 ++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 29b3800..46f0847 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -310,6 +310,51 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; }; + pwm0: pwm@ff1b0000 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm1: pwm@ff1b0010 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm2: pwm@ff1b0020 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm3: pwm@ff1b0030 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0030 0x0 0x10>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwmir_pin>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + saradc: adc@ff280000 { compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc"; reg = <0x0 0xff280000 0x0 0x100>; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: david.wu@rock-chips.com (David Wu) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/5] Arm64: dts: rockchip: Add pwm nodes for rk3328 Date: Thu, 29 Jun 2017 20:34:10 +0800 [thread overview] Message-ID: <1498739650-27774-1-git-send-email-david.wu@rock-chips.com> (raw) In-Reply-To: <1498739271-27431-1-git-send-email-david.wu@rock-chips.com> There are 4 pwm channels built in rk3328 soc, need to configure the both APB clock and bus clock. Signed-off-by: David Wu <david.wu@rock-chips.com> --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 45 ++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 29b3800..46f0847 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -310,6 +310,51 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; }; + pwm0: pwm at ff1b0000 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm1: pwm at ff1b0010 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm2: pwm at ff1b0020 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + + pwm3: pwm at ff1b0030 { + compatible = "rockchip,rk3328-pwm"; + reg = <0x0 0xff1b0030 0x0 0x10>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwmir_pin>; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + status = "disabled"; + }; + saradc: adc at ff280000 { compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc"; reg = <0x0 0xff280000 0x0 0x100>; -- 1.9.1
next prev parent reply other threads:[~2017-06-29 12:30 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-06-29 12:27 [PATCH 0/5] Add rk3328 pwm support David Wu 2017-06-29 12:27 ` David Wu 2017-06-29 12:27 ` David Wu 2017-06-29 12:27 ` [PATCH 1/5] pwm: rockchip: Add APB and function both clocks support David Wu 2017-06-29 12:27 ` David Wu 2017-06-29 12:27 ` David Wu 2017-07-06 17:12 ` Rob Herring 2017-07-06 17:12 ` Rob Herring 2017-07-06 17:12 ` Rob Herring 2017-06-29 12:27 ` [PATCH 2/5] pwm: rockchip: Remove the judge from return value of rockchip_pwm_config() David Wu 2017-06-29 12:27 ` David Wu 2017-07-03 18:31 ` Boris Brezillon 2017-07-03 18:31 ` Boris Brezillon 2017-06-29 12:27 ` [PATCH 3/5] pwm: rockchip: Move the configuration of polarity from rockchip_pwm_set_enable() to rockchip_pwm_config() David Wu 2017-06-29 12:27 ` David Wu 2017-06-29 12:27 ` David Wu 2017-07-03 18:36 ` Boris Brezillon 2017-07-03 18:36 ` Boris Brezillon 2017-07-03 18:36 ` Boris Brezillon 2017-07-04 6:46 ` David.Wu 2017-07-04 6:46 ` David.Wu 2017-06-29 12:27 ` [PATCH 4/5] pwm: rockchip: Add atomic updated feature for rk3328 David Wu 2017-06-29 12:27 ` David Wu 2017-07-03 18:39 ` Boris Brezillon 2017-07-03 18:39 ` Boris Brezillon 2017-07-04 7:37 ` David.Wu 2017-07-04 7:37 ` David.Wu 2017-07-06 17:17 ` Rob Herring 2017-07-06 17:17 ` Rob Herring 2017-06-29 12:34 ` David Wu [this message] 2017-06-29 12:34 ` [PATCH 5/5] Arm64: dts: rockchip: Add pwm nodes " David Wu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1498739650-27774-1-git-send-email-david.wu@rock-chips.com \ --to=david.wu@rock-chips.com \ --cc=boris.brezillon@free-electrons.com \ --cc=briannorris@chromium.org \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=dianders@chromium.org \ --cc=heiko@sntech.de \ --cc=huangtao@rock-chips.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.