All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Felipe Balbi <felipe.balbi@linux.intel.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Mathias Nyman <mathias.nyman@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Jean Delvare <jdelvare@suse.de>,
	Sean Wang <sean.wang@mediatek.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>
Subject: [PATCH 3/7] usb: xhci-mtk: use APIs of mtu_wakeup to support remote wakeup
Date: Sat, 9 Dec 2017 16:45:32 +0800	[thread overview]
Message-ID: <1512809136-2779-4-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1512809136-2779-1-git-send-email-chunfeng.yun@mediatek.com>

On some platforms, there are two xHCI IPs, but the old way of
usb wakeup doesn't support it, so use the new APIs of mtu_wakeup
to support it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/host/xhci-mtk.c | 39 +++++++++++++++++++++++----------------
 drivers/usb/host/xhci-mtk.h |  2 ++
 2 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index b62a1d2..3176a10 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -19,6 +19,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <linux/soc/mediatek/usb-wakeup.h>
 
 #include "xhci.h"
 #include "xhci-mtk.h"
@@ -366,7 +367,9 @@ static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk)
 
 static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
 {
-	if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+	if (mtk->wakeup)
+		mtu_wakeup_enable(mtk->uwk);
+	else if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
 		usb_wakeup_ip_sleep_en(mtk);
 	else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
 		usb_wakeup_line_state_en(mtk);
@@ -374,7 +377,9 @@ static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
 
 static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
 {
-	if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+	if (mtk->wakeup)
+		mtu_wakeup_disable(mtk->uwk);
+	else if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
 		usb_wakeup_ip_sleep_dis(mtk);
 	else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
 		usb_wakeup_line_state_dis(mtk);
@@ -383,24 +388,26 @@ static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
 static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
 				struct device_node *dn)
 {
-	struct device *dev = mtk->dev;
+	/* try the new way first */
+	mtk->wakeup = of_property_read_bool(dn, "wakeup-source");
+	if (mtk->wakeup) {
+		mtk->uwk = devm_of_uwk_get_by_index(mtk->dev, dn, 0);
+		if (IS_ERR(mtk->uwk))
+			dev_err(mtk->dev, "fail to get uwk\n");
+
+		return PTR_ERR_OR_ZERO(mtk->uwk);
+	}
 
-	/*
-	* wakeup function is optional, so it is not an error if this property
-	* does not exist, and in such case, no need to get relative
-	* properties anymore.
-	*/
+	/* wakeup function is optional (deprecated, use the new way instead) */
 	of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src);
-	if (!mtk->wakeup_src)
-		return 0;
-
-	mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
+	if (mtk->wakeup_src) {
+		mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
 						"mediatek,syscon-wakeup");
-	if (IS_ERR(mtk->pericfg)) {
-		dev_err(dev, "fail to get pericfg regs\n");
-		return PTR_ERR(mtk->pericfg);
+		if (IS_ERR(mtk->pericfg)) {
+			dev_err(mtk->dev, "fail to get pericfg regs\n");
+			return PTR_ERR(mtk->pericfg);
+		}
 	}
-
 	return 0;
 }
 
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 6b74ce5..95bd6ca 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -124,6 +124,8 @@ struct xhci_hcd_mtk {
 	int num_phys;
 	int wakeup_src;
 	bool lpm_support;
+	struct mtu_wakeup *uwk;
+	bool wakeup;
 };
 
 static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Felipe Balbi <felipe.balbi@linux.intel.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Mathias Nyman <mathias.nyman@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sean Wang <sean.wang@mediatek.com>,
	Will Deacon <will.deacon@arm.com>,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	Catalin Marinas <catalin.marinas@arm.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Jean Delvare <jdelvare@suse.de>
Subject: [PATCH 3/7] usb: xhci-mtk: use APIs of mtu_wakeup to support remote wakeup
Date: Sat, 9 Dec 2017 16:45:32 +0800	[thread overview]
Message-ID: <1512809136-2779-4-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1512809136-2779-1-git-send-email-chunfeng.yun@mediatek.com>

On some platforms, there are two xHCI IPs, but the old way of
usb wakeup doesn't support it, so use the new APIs of mtu_wakeup
to support it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/host/xhci-mtk.c | 39 +++++++++++++++++++++++----------------
 drivers/usb/host/xhci-mtk.h |  2 ++
 2 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index b62a1d2..3176a10 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -19,6 +19,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <linux/soc/mediatek/usb-wakeup.h>
 
 #include "xhci.h"
 #include "xhci-mtk.h"
@@ -366,7 +367,9 @@ static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk)
 
 static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
 {
-	if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+	if (mtk->wakeup)
+		mtu_wakeup_enable(mtk->uwk);
+	else if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
 		usb_wakeup_ip_sleep_en(mtk);
 	else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
 		usb_wakeup_line_state_en(mtk);
@@ -374,7 +377,9 @@ static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
 
 static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
 {
-	if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+	if (mtk->wakeup)
+		mtu_wakeup_disable(mtk->uwk);
+	else if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
 		usb_wakeup_ip_sleep_dis(mtk);
 	else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
 		usb_wakeup_line_state_dis(mtk);
@@ -383,24 +388,26 @@ static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
 static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
 				struct device_node *dn)
 {
-	struct device *dev = mtk->dev;
+	/* try the new way first */
+	mtk->wakeup = of_property_read_bool(dn, "wakeup-source");
+	if (mtk->wakeup) {
+		mtk->uwk = devm_of_uwk_get_by_index(mtk->dev, dn, 0);
+		if (IS_ERR(mtk->uwk))
+			dev_err(mtk->dev, "fail to get uwk\n");
+
+		return PTR_ERR_OR_ZERO(mtk->uwk);
+	}
 
-	/*
-	* wakeup function is optional, so it is not an error if this property
-	* does not exist, and in such case, no need to get relative
-	* properties anymore.
-	*/
+	/* wakeup function is optional (deprecated, use the new way instead) */
 	of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src);
-	if (!mtk->wakeup_src)
-		return 0;
-
-	mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
+	if (mtk->wakeup_src) {
+		mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
 						"mediatek,syscon-wakeup");
-	if (IS_ERR(mtk->pericfg)) {
-		dev_err(dev, "fail to get pericfg regs\n");
-		return PTR_ERR(mtk->pericfg);
+		if (IS_ERR(mtk->pericfg)) {
+			dev_err(mtk->dev, "fail to get pericfg regs\n");
+			return PTR_ERR(mtk->pericfg);
+		}
 	}
-
 	return 0;
 }
 
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 6b74ce5..95bd6ca 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -124,6 +124,8 @@ struct xhci_hcd_mtk {
 	int num_phys;
 	int wakeup_src;
 	bool lpm_support;
+	struct mtu_wakeup *uwk;
+	bool wakeup;
 };
 
 static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Felipe Balbi <felipe.balbi@linux.intel.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Mathias Nyman <mathias.nyman@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Jean Delvare <jdelvare@suse.de>,
	Sean Wang <sean.wang@mediatek.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: [3/7] usb: xhci-mtk: use APIs of mtu_wakeup to support remote wakeup
Date: Sat, 9 Dec 2017 16:45:32 +0800	[thread overview]
Message-ID: <1512809136-2779-4-git-send-email-chunfeng.yun@mediatek.com> (raw)

On some platforms, there are two xHCI IPs, but the old way of
usb wakeup doesn't support it, so use the new APIs of mtu_wakeup
to support it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/host/xhci-mtk.c | 39 +++++++++++++++++++++++----------------
 drivers/usb/host/xhci-mtk.h |  2 ++
 2 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index b62a1d2..3176a10 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -19,6 +19,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <linux/soc/mediatek/usb-wakeup.h>
 
 #include "xhci.h"
 #include "xhci-mtk.h"
@@ -366,7 +367,9 @@ static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk)
 
 static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
 {
-	if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+	if (mtk->wakeup)
+		mtu_wakeup_enable(mtk->uwk);
+	else if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
 		usb_wakeup_ip_sleep_en(mtk);
 	else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
 		usb_wakeup_line_state_en(mtk);
@@ -374,7 +377,9 @@ static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
 
 static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
 {
-	if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+	if (mtk->wakeup)
+		mtu_wakeup_disable(mtk->uwk);
+	else if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
 		usb_wakeup_ip_sleep_dis(mtk);
 	else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
 		usb_wakeup_line_state_dis(mtk);
@@ -383,24 +388,26 @@ static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
 static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
 				struct device_node *dn)
 {
-	struct device *dev = mtk->dev;
+	/* try the new way first */
+	mtk->wakeup = of_property_read_bool(dn, "wakeup-source");
+	if (mtk->wakeup) {
+		mtk->uwk = devm_of_uwk_get_by_index(mtk->dev, dn, 0);
+		if (IS_ERR(mtk->uwk))
+			dev_err(mtk->dev, "fail to get uwk\n");
+
+		return PTR_ERR_OR_ZERO(mtk->uwk);
+	}
 
-	/*
-	* wakeup function is optional, so it is not an error if this property
-	* does not exist, and in such case, no need to get relative
-	* properties anymore.
-	*/
+	/* wakeup function is optional (deprecated, use the new way instead) */
 	of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src);
-	if (!mtk->wakeup_src)
-		return 0;
-
-	mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
+	if (mtk->wakeup_src) {
+		mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
 						"mediatek,syscon-wakeup");
-	if (IS_ERR(mtk->pericfg)) {
-		dev_err(dev, "fail to get pericfg regs\n");
-		return PTR_ERR(mtk->pericfg);
+		if (IS_ERR(mtk->pericfg)) {
+			dev_err(mtk->dev, "fail to get pericfg regs\n");
+			return PTR_ERR(mtk->pericfg);
+		}
 	}
-
 	return 0;
 }
 
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 6b74ce5..95bd6ca 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -124,6 +124,8 @@ struct xhci_hcd_mtk {
 	int num_phys;
 	int wakeup_src;
 	bool lpm_support;
+	struct mtu_wakeup *uwk;
+	bool wakeup;
 };
 
 static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)

WARNING: multiple messages have this Message-ID (diff)
From: chunfeng.yun@mediatek.com (Chunfeng Yun)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/7] usb: xhci-mtk: use APIs of mtu_wakeup to support remote wakeup
Date: Sat, 9 Dec 2017 16:45:32 +0800	[thread overview]
Message-ID: <1512809136-2779-4-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1512809136-2779-1-git-send-email-chunfeng.yun@mediatek.com>

On some platforms, there are two xHCI IPs, but the old way of
usb wakeup doesn't support it, so use the new APIs of mtu_wakeup
to support it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/host/xhci-mtk.c | 39 +++++++++++++++++++++++----------------
 drivers/usb/host/xhci-mtk.h |  2 ++
 2 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index b62a1d2..3176a10 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -19,6 +19,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <linux/soc/mediatek/usb-wakeup.h>
 
 #include "xhci.h"
 #include "xhci-mtk.h"
@@ -366,7 +367,9 @@ static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk)
 
 static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
 {
-	if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+	if (mtk->wakeup)
+		mtu_wakeup_enable(mtk->uwk);
+	else if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
 		usb_wakeup_ip_sleep_en(mtk);
 	else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
 		usb_wakeup_line_state_en(mtk);
@@ -374,7 +377,9 @@ static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
 
 static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
 {
-	if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+	if (mtk->wakeup)
+		mtu_wakeup_disable(mtk->uwk);
+	else if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
 		usb_wakeup_ip_sleep_dis(mtk);
 	else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
 		usb_wakeup_line_state_dis(mtk);
@@ -383,24 +388,26 @@ static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
 static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
 				struct device_node *dn)
 {
-	struct device *dev = mtk->dev;
+	/* try the new way first */
+	mtk->wakeup = of_property_read_bool(dn, "wakeup-source");
+	if (mtk->wakeup) {
+		mtk->uwk = devm_of_uwk_get_by_index(mtk->dev, dn, 0);
+		if (IS_ERR(mtk->uwk))
+			dev_err(mtk->dev, "fail to get uwk\n");
+
+		return PTR_ERR_OR_ZERO(mtk->uwk);
+	}
 
-	/*
-	* wakeup function is optional, so it is not an error if this property
-	* does not exist, and in such case, no need to get relative
-	* properties anymore.
-	*/
+	/* wakeup function is optional (deprecated, use the new way instead) */
 	of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src);
-	if (!mtk->wakeup_src)
-		return 0;
-
-	mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
+	if (mtk->wakeup_src) {
+		mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
 						"mediatek,syscon-wakeup");
-	if (IS_ERR(mtk->pericfg)) {
-		dev_err(dev, "fail to get pericfg regs\n");
-		return PTR_ERR(mtk->pericfg);
+		if (IS_ERR(mtk->pericfg)) {
+			dev_err(mtk->dev, "fail to get pericfg regs\n");
+			return PTR_ERR(mtk->pericfg);
+		}
 	}
-
 	return 0;
 }
 
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 6b74ce5..95bd6ca 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -124,6 +124,8 @@ struct xhci_hcd_mtk {
 	int num_phys;
 	int wakeup_src;
 	bool lpm_support;
+	struct mtu_wakeup *uwk;
+	bool wakeup;
 };
 
 static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
-- 
1.9.1

  parent reply	other threads:[~2017-12-09  8:48 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-09  8:45 [PATCH 0/7] Add USB remote wakeup driver Chunfeng Yun
2017-12-09  8:45 ` Chunfeng Yun
2017-12-09  8:45 ` Chunfeng Yun
2017-12-09  8:45 ` [PATCH 1/7] soc: mediatek: Add USB " Chunfeng Yun
2017-12-09  8:45   ` Chunfeng Yun
2017-12-09  8:45   ` [1/7] " Chunfeng Yun
2017-12-09  8:45   ` [PATCH 1/7] " Chunfeng Yun
2017-12-15 20:55   ` Rob Herring
2017-12-15 20:55     ` Rob Herring
2017-12-15 20:55     ` [1/7] " Rob Herring
2017-12-15 20:55     ` [PATCH 1/7] " Rob Herring
2017-12-21  6:50     ` Chunfeng Yun
2017-12-21  6:50       ` Chunfeng Yun
2017-12-21  6:50       ` [1/7] " Chunfeng Yun
2017-12-21  6:50       ` [PATCH 1/7] " Chunfeng Yun
2017-12-09  8:45 ` [PATCH 2/7] dt-bindings: soc: mediatek: add bindings document for USB wakeup Chunfeng Yun
2017-12-09  8:45   ` Chunfeng Yun
2017-12-09  8:45   ` [2/7] " Chunfeng Yun
2017-12-09  8:45   ` [PATCH 2/7] " Chunfeng Yun
2017-12-09  8:45 ` Chunfeng Yun [this message]
2017-12-09  8:45   ` [PATCH 3/7] usb: xhci-mtk: use APIs of mtu_wakeup to support remote wakeup Chunfeng Yun
2017-12-09  8:45   ` [3/7] " Chunfeng Yun
2017-12-09  8:45   ` [PATCH 3/7] " Chunfeng Yun
2017-12-09  8:45 ` [PATCH 4/7] usb: mtu3: " Chunfeng Yun
2017-12-09  8:45   ` Chunfeng Yun
2017-12-09  8:45   ` [4/7] " Chunfeng Yun
2017-12-09  8:45   ` [PATCH 4/7] " Chunfeng Yun
2017-12-09  8:45 ` [PATCH 5/7] dt-bindings: usb: mtk-xhci: add USB wakeup properties Chunfeng Yun
2017-12-09  8:45   ` Chunfeng Yun
2017-12-09  8:45   ` [5/7] " Chunfeng Yun
2017-12-09  8:45   ` [PATCH 5/7] " Chunfeng Yun
2017-12-09  8:45 ` [PATCH 6/7] dt-bindings: usb: mtu3: " Chunfeng Yun
2017-12-09  8:45   ` Chunfeng Yun
2017-12-09  8:45   ` [6/7] " Chunfeng Yun
2017-12-09  8:45   ` [PATCH 6/7] " Chunfeng Yun
2017-12-09  8:45 ` [PATCH 7/7] arm64: dts: mt8173: add uwk node and remove unused usb property Chunfeng Yun
2017-12-09  8:45   ` Chunfeng Yun
2017-12-09  8:45   ` [7/7] " Chunfeng Yun
2017-12-09  8:45   ` [PATCH 7/7] " Chunfeng Yun
2017-12-15 20:55 ` [PATCH 0/7] Add USB remote wakeup driver Rob Herring
2017-12-15 20:55   ` Rob Herring
2017-12-15 20:55   ` Rob Herring
2017-12-21  6:48   ` Chunfeng Yun
2017-12-21  6:48     ` Chunfeng Yun
2017-12-21  6:48     ` Chunfeng Yun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1512809136-2779-4-git-send-email-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=felipe.balbi@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jdelvare@suse.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mathias.nyman@intel.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.