From: Stefan Riedmueller <s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
fabio.estevam-3arQi8VN3Tc@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Christian Hemp <c.hemp-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>,
Stefan Christ <s.christ-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>,
Stefan Riedmueller
<s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH v5 3/6] ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDK
Date: Tue, 9 Jan 2018 17:09:57 +0100 [thread overview]
Message-ID: <1515514200-9801-4-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1515514200-9801-1-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
From: Christian Hemp <c.hemp-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
Add support for the PHYTEC phyBOARD-Mira Rapid Development Kit with
i.MX 6Quad/Dual with eMMC or NAND.
Following interfaces are supported:
- Gigabit Ethernet
- USB Host
- CAN
- RS232
- PCIe
- LVDS
- HDMI
Signed-off-by: Christian Hemp <c.hemp-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Stefan Christ <s.christ-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Stefan Riedmueller <s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
Reviewed-by: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 72 ++++++++++++++++++++++++
arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts | 72 ++++++++++++++++++++++++
3 files changed, 146 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
create mode 100644 arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..b793617 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -449,6 +449,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-nitrogen6_max.dtb \
imx6q-nitrogen6_som2.dtb \
imx6q-novena.dtb \
+ imx6q-phytec-mira-rdk-emmc.dtb \
+ imx6q-phytec-mira-rdk-nand.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-pistachio.dtb \
imx6q-rex-pro.dtb \
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
new file mode 100644
index 0000000..8fdce3c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
+ compatible = "phytec,imx6q-pbac06-emmc", "phytec,imx6q-pbac06",
+ "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+ chosen {
+ linux,stdout-path = &uart2;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&fec {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+&m25p80 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
+
+&usdhc4 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
new file mode 100644
index 0000000..8afa5ce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
+ compatible = "phytec,imx6q-pbac06-nand", "phytec,imx6q-pbac06",
+ "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+ chosen {
+ linux,stdout-path = &uart2;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&fec {
+ status = "okay";
+};
+
+&gpmi {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+&m25p80 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: s.riedmueller@phytec.de (Stefan Riedmueller)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 3/6] ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDK
Date: Tue, 9 Jan 2018 17:09:57 +0100 [thread overview]
Message-ID: <1515514200-9801-4-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1515514200-9801-1-git-send-email-s.riedmueller@phytec.de>
From: Christian Hemp <c.hemp@phytec.de>
Add support for the PHYTEC phyBOARD-Mira Rapid Development Kit with
i.MX 6Quad/Dual with eMMC or NAND.
Following interfaces are supported:
- Gigabit Ethernet
- USB Host
- CAN
- RS232
- PCIe
- LVDS
- HDMI
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 72 ++++++++++++++++++++++++
arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts | 72 ++++++++++++++++++++++++
3 files changed, 146 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
create mode 100644 arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..b793617 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -449,6 +449,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-nitrogen6_max.dtb \
imx6q-nitrogen6_som2.dtb \
imx6q-novena.dtb \
+ imx6q-phytec-mira-rdk-emmc.dtb \
+ imx6q-phytec-mira-rdk-nand.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-pistachio.dtb \
imx6q-rex-pro.dtb \
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
new file mode 100644
index 0000000..8fdce3c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
+ compatible = "phytec,imx6q-pbac06-emmc", "phytec,imx6q-pbac06",
+ "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+ chosen {
+ linux,stdout-path = &uart2;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&fec {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+&m25p80 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
+
+&usdhc4 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
new file mode 100644
index 0000000..8afa5ce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
+ compatible = "phytec,imx6q-pbac06-nand", "phytec,imx6q-pbac06",
+ "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+ chosen {
+ linux,stdout-path = &uart2;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&fec {
+ status = "okay";
+};
+
+&gpmi {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+&m25p80 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
--
2.7.4
next prev parent reply other threads:[~2018-01-09 16:09 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-09 16:09 [PATCH v5 0/6] ARM: dts: Add PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira carrier board support Stefan Riedmueller
2018-01-09 16:09 ` Stefan Riedmueller
[not found] ` <1515514200-9801-1-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
2018-01-09 16:09 ` [PATCH v5 1/6] ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM Stefan Riedmueller
2018-01-09 16:09 ` Stefan Riedmueller
2018-01-09 16:09 ` [PATCH v5 2/6] ARM: dts: imx6: Add initial support for phyBOARD-Mira Stefan Riedmueller
2018-01-09 16:09 ` Stefan Riedmueller
2018-01-09 16:09 ` Stefan Riedmueller [this message]
2018-01-09 16:09 ` [PATCH v5 3/6] ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDK Stefan Riedmueller
2018-01-09 16:09 ` [PATCH v5 4/6] ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6 DualLight/Solo RDK Stefan Riedmueller
2018-01-09 16:09 ` Stefan Riedmueller
2018-01-09 16:09 ` [PATCH v5 5/6] ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus Stefan Riedmueller
2018-01-09 16:09 ` Stefan Riedmueller
2018-01-09 16:10 ` [PATCH v5 6/6] ARM: imx_v6_v7_defconfig: Enable Dialog Semiconductor DA9062 driver Stefan Riedmueller
2018-01-09 16:10 ` Stefan Riedmueller
2018-01-22 10:28 ` [PATCH v5 0/6] ARM: dts: Add PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira carrier board support Stefan Riedmüller
2018-01-22 10:28 ` Stefan Riedmüller
2018-02-02 6:06 ` Shawn Guo
2018-02-02 6:06 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515514200-9801-4-git-send-email-s.riedmueller@phytec.de \
--to=s.riedmueller-gut5v/wyfqezqb+pc5nmwq@public.gmane.org \
--cc=c.hemp-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=s.christ-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.