From: Carl Huang <cjhuang@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 2/2] ath10k: support MAC address randomization in scan
Date: Fri, 30 Mar 2018 11:14:00 +0800 [thread overview]
Message-ID: <1522379640-6442-3-git-send-email-cjhuang@codeaurora.org> (raw)
In-Reply-To: <1522379640-6442-1-git-send-email-cjhuang@codeaurora.org>
The ath10k reports the random_mac_addr capability to upper layer
based on the service bit firmware reported. Driver sets the
spoofed flag in scan_ctrl_flag to firmware if upper layer has
enabled this feature in scan request.
Test with QCA6174 hw3.0 and firmware-6.bin_WLAN.RM.4.4.1-00102-QCARMSWP-1,
but QCA9377 is also affected.
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 17 +++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-ops.h | 22 ++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 25 +++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.h | 11 +++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 5 +++++
drivers/net/wireless/ath/ath10k/wmi.h | 9 +++++++++
6 files changed, 89 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ebb3f1b..c5cd5e5 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5699,6 +5699,12 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw,
arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
}
+ if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
+ arg.scan_ctrl_flags |= WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ;
+ ether_addr_copy(arg.mac_addr.addr, req->mac_addr);
+ ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask);
+ }
+
if (req->n_channels) {
arg.n_channels = req->n_channels;
for (i = 0; i < arg.n_channels; i++)
@@ -8397,6 +8403,17 @@ int ath10k_mac_register(struct ath10k *ar)
goto err_dfs_detector_exit;
}
+ if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) {
+ ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr);
+ if (ret) {
+ ath10k_err(ar, "failed to set prob req oui: %i\n", ret);
+ goto err_dfs_detector_exit;
+ }
+
+ ar->hw->wiphy->features |=
+ NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
+ }
+
ar->hw->wiphy->cipher_suites = cipher_suites;
/* QCA988x and QCA6174 family chips do not support CCMP-256, GCMP-128
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 86d083d..cf17d91 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -118,6 +118,8 @@ struct wmi_ops {
u32 value);
struct sk_buff *(*gen_scan_chan_list)(struct ath10k *ar,
const struct wmi_scan_chan_list_arg *arg);
+ struct sk_buff *(*gen_scan_prob_req_oui)(struct ath10k *ar,
+ u32 prob_req_oui);
struct sk_buff *(*gen_beacon_dma)(struct ath10k *ar, u32 vdev_id,
const void *bcn, size_t bcn_len,
u32 bcn_paddr, bool dtim_zero,
@@ -892,6 +894,26 @@ ath10k_wmi_scan_chan_list(struct ath10k *ar,
}
static inline int
+ath10k_wmi_scan_prob_req_oui(struct ath10k *ar, const u8 mac_addr[ETH_ALEN])
+{
+ struct sk_buff *skb;
+ u32 prob_req_oui;
+
+ prob_req_oui = (((u32)mac_addr[0]) << 16) |
+ (((u32)mac_addr[1]) << 8) | mac_addr[2];
+
+ if (!ar->wmi.ops->gen_scan_prob_req_oui)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_scan_prob_req_oui(ar, prob_req_oui);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->scan_prob_req_oui_cmdid);
+}
+
+static inline int
ath10k_wmi_peer_assoc(struct ath10k *ar,
const struct wmi_peer_assoc_complete_arg *arg)
{
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index cb0d130..20e3fd4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1573,6 +1573,8 @@ ath10k_wmi_tlv_op_gen_start_scan(struct ath10k *ar,
cmd->num_bssids = __cpu_to_le32(arg->n_bssids);
cmd->ie_len = __cpu_to_le32(arg->ie_len);
cmd->num_probes = __cpu_to_le32(3);
+ ether_addr_copy(cmd->mac_addr.addr, arg->mac_addr.addr);
+ ether_addr_copy(cmd->mac_mask.addr, arg->mac_mask.addr);
/* FIXME: There are some scan flag inconsistencies across firmwares,
* e.g. WMI-TLV inverts the logic behind the following flag.
@@ -2420,6 +2422,27 @@ ath10k_wmi_tlv_op_gen_scan_chan_list(struct ath10k *ar,
}
static struct sk_buff *
+ath10k_wmi_tlv_op_gen_scan_prob_req_oui(struct ath10k *ar, u32 prob_req_oui)
+{
+ struct wmi_scan_prob_req_oui_cmd *cmd;
+ struct wmi_tlv *tlv;
+ struct sk_buff *skb;
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*tlv) + sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ tlv = (void *)skb->data;
+ tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_SCAN_PROB_REQ_OUI_CMD);
+ tlv->len = __cpu_to_le16(sizeof(*cmd));
+ cmd = (void *)tlv->value;
+ cmd->prob_req_oui = __cpu_to_le32(prob_req_oui);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv scan prob req oui\n");
+ return skb;
+}
+
+static struct sk_buff *
ath10k_wmi_tlv_op_gen_beacon_dma(struct ath10k *ar, u32 vdev_id,
const void *bcn, size_t bcn_len,
u32 bcn_paddr, bool dtim_zero,
@@ -3366,6 +3389,7 @@ static struct wmi_cmd_map wmi_tlv_cmd_map = {
.stop_scan_cmdid = WMI_TLV_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_TLV_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_TLV_SCAN_SCH_PRIO_TBL_CMDID,
+ .scan_prob_req_oui_cmdid = WMI_TLV_SCAN_PROB_REQ_OUI_CMDID,
.pdev_set_regdomain_cmdid = WMI_TLV_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_TLV_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_TLV_PDEV_SET_PARAM_CMDID,
@@ -3734,6 +3758,7 @@ static const struct wmi_ops wmi_tlv_ops = {
.gen_set_sta_ps = ath10k_wmi_tlv_op_gen_set_sta_ps,
.gen_set_ap_ps = ath10k_wmi_tlv_op_gen_set_ap_ps,
.gen_scan_chan_list = ath10k_wmi_tlv_op_gen_scan_chan_list,
+ .gen_scan_prob_req_oui = ath10k_wmi_tlv_op_gen_scan_prob_req_oui,
.gen_beacon_dma = ath10k_wmi_tlv_op_gen_beacon_dma,
.gen_pdev_set_wmm = ath10k_wmi_tlv_op_gen_pdev_set_wmm,
.gen_request_stats = ath10k_wmi_tlv_op_gen_request_stats,
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 2889225..e8ec1c3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1695,6 +1695,15 @@ struct wmi_tlv_scan_chan_list_cmd {
__le32 num_scan_chans;
} __packed;
+struct wmi_scan_prob_req_oui_cmd {
+/* OUI to be used in Probe Request frame when random MAC address is
+ * requested part of scan parameters. This is applied to both FW internal
+ * scans and host initiated scans. Host can request for random MAC address
+ * with WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ flag.
+ */
+ __le32 prob_req_oui;
+} __packed;
+
struct wmi_tlv_start_scan_cmd {
struct wmi_start_scan_common common;
__le32 burst_duration_ms;
@@ -1703,6 +1712,8 @@ struct wmi_tlv_start_scan_cmd {
__le32 num_ssids;
__le32 ie_len;
__le32 num_probes;
+ struct wmi_mac_addr mac_addr;
+ struct wmi_mac_addr mac_mask;
} __packed;
struct wmi_tlv_vdev_start_cmd {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 4aca166..04b5606 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -41,6 +41,7 @@ static struct wmi_cmd_map wmi_cmd_map = {
.stop_scan_cmdid = WMI_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_SCAN_SCH_PRIO_TBL_CMDID,
+ .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
.pdev_set_regdomain_cmdid = WMI_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_PDEV_SET_PARAM_CMDID,
@@ -205,6 +206,7 @@ static struct wmi_cmd_map wmi_10x_cmd_map = {
.stop_scan_cmdid = WMI_10X_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_10X_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED,
+ .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
.pdev_set_regdomain_cmdid = WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_10X_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_10X_PDEV_SET_PARAM_CMDID,
@@ -371,6 +373,7 @@ static struct wmi_cmd_map wmi_10_2_4_cmd_map = {
.stop_scan_cmdid = WMI_10_2_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_10_2_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED,
+ .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
.pdev_set_regdomain_cmdid = WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_10_2_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_10_2_PDEV_SET_PARAM_CMDID,
@@ -537,6 +540,7 @@ static struct wmi_cmd_map wmi_10_4_cmd_map = {
.stop_scan_cmdid = WMI_10_4_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_10_4_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
+ .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
.pdev_set_regdomain_cmdid = WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_10_4_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_10_4_PDEV_SET_PARAM_CMDID,
@@ -1334,6 +1338,7 @@ static struct wmi_cmd_map wmi_10_2_cmd_map = {
.stop_scan_cmdid = WMI_10_2_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_10_2_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED,
+ .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
.pdev_set_regdomain_cmdid = WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_10_2_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_10_2_PDEV_SET_PARAM_CMDID,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 6919618..3dd8f76 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -767,6 +767,7 @@ struct wmi_cmd_map {
u32 stop_scan_cmdid;
u32 scan_chan_list_cmdid;
u32 scan_sch_prio_tbl_cmdid;
+ u32 scan_prob_req_oui_cmdid;
u32 pdev_set_regdomain_cmdid;
u32 pdev_set_channel_cmdid;
u32 pdev_set_param_cmdid;
@@ -3144,6 +3145,8 @@ struct wmi_start_scan_arg {
u16 channels[64];
struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
+ struct wmi_mac_addr mac_addr;
+ struct wmi_mac_addr mac_mask;
};
/* scan control flags */
@@ -3167,6 +3170,12 @@ struct wmi_start_scan_arg {
*/
#define WMI_SCAN_CONTINUE_ON_ERROR 0x80
+/* Use random MAC address for TA for Probe Request frame and add
+ * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
+ * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
+ */
+#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000
+
/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
#define WMI_SCAN_CLASS_MASK 0xFF000000
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Carl Huang <cjhuang@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 2/2] ath10k: support MAC address randomization in scan
Date: Fri, 30 Mar 2018 11:14:00 +0800 [thread overview]
Message-ID: <1522379640-6442-3-git-send-email-cjhuang@codeaurora.org> (raw)
In-Reply-To: <1522379640-6442-1-git-send-email-cjhuang@codeaurora.org>
The ath10k reports the random_mac_addr capability to upper layer
based on the service bit firmware reported. Driver sets the
spoofed flag in scan_ctrl_flag to firmware if upper layer has
enabled this feature in scan request.
Test with QCA6174 hw3.0 and firmware-6.bin_WLAN.RM.4.4.1-00102-QCARMSWP-1,
but QCA9377 is also affected.
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 17 +++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-ops.h | 22 ++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 25 +++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.h | 11 +++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 5 +++++
drivers/net/wireless/ath/ath10k/wmi.h | 9 +++++++++
6 files changed, 89 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ebb3f1b..c5cd5e5 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5699,6 +5699,12 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw,
arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
}
+ if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
+ arg.scan_ctrl_flags |= WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ;
+ ether_addr_copy(arg.mac_addr.addr, req->mac_addr);
+ ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask);
+ }
+
if (req->n_channels) {
arg.n_channels = req->n_channels;
for (i = 0; i < arg.n_channels; i++)
@@ -8397,6 +8403,17 @@ int ath10k_mac_register(struct ath10k *ar)
goto err_dfs_detector_exit;
}
+ if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) {
+ ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr);
+ if (ret) {
+ ath10k_err(ar, "failed to set prob req oui: %i\n", ret);
+ goto err_dfs_detector_exit;
+ }
+
+ ar->hw->wiphy->features |=
+ NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
+ }
+
ar->hw->wiphy->cipher_suites = cipher_suites;
/* QCA988x and QCA6174 family chips do not support CCMP-256, GCMP-128
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 86d083d..cf17d91 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -118,6 +118,8 @@ struct wmi_ops {
u32 value);
struct sk_buff *(*gen_scan_chan_list)(struct ath10k *ar,
const struct wmi_scan_chan_list_arg *arg);
+ struct sk_buff *(*gen_scan_prob_req_oui)(struct ath10k *ar,
+ u32 prob_req_oui);
struct sk_buff *(*gen_beacon_dma)(struct ath10k *ar, u32 vdev_id,
const void *bcn, size_t bcn_len,
u32 bcn_paddr, bool dtim_zero,
@@ -892,6 +894,26 @@ ath10k_wmi_scan_chan_list(struct ath10k *ar,
}
static inline int
+ath10k_wmi_scan_prob_req_oui(struct ath10k *ar, const u8 mac_addr[ETH_ALEN])
+{
+ struct sk_buff *skb;
+ u32 prob_req_oui;
+
+ prob_req_oui = (((u32)mac_addr[0]) << 16) |
+ (((u32)mac_addr[1]) << 8) | mac_addr[2];
+
+ if (!ar->wmi.ops->gen_scan_prob_req_oui)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_scan_prob_req_oui(ar, prob_req_oui);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->scan_prob_req_oui_cmdid);
+}
+
+static inline int
ath10k_wmi_peer_assoc(struct ath10k *ar,
const struct wmi_peer_assoc_complete_arg *arg)
{
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index cb0d130..20e3fd4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1573,6 +1573,8 @@ ath10k_wmi_tlv_op_gen_start_scan(struct ath10k *ar,
cmd->num_bssids = __cpu_to_le32(arg->n_bssids);
cmd->ie_len = __cpu_to_le32(arg->ie_len);
cmd->num_probes = __cpu_to_le32(3);
+ ether_addr_copy(cmd->mac_addr.addr, arg->mac_addr.addr);
+ ether_addr_copy(cmd->mac_mask.addr, arg->mac_mask.addr);
/* FIXME: There are some scan flag inconsistencies across firmwares,
* e.g. WMI-TLV inverts the logic behind the following flag.
@@ -2420,6 +2422,27 @@ ath10k_wmi_tlv_op_gen_scan_chan_list(struct ath10k *ar,
}
static struct sk_buff *
+ath10k_wmi_tlv_op_gen_scan_prob_req_oui(struct ath10k *ar, u32 prob_req_oui)
+{
+ struct wmi_scan_prob_req_oui_cmd *cmd;
+ struct wmi_tlv *tlv;
+ struct sk_buff *skb;
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*tlv) + sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ tlv = (void *)skb->data;
+ tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_SCAN_PROB_REQ_OUI_CMD);
+ tlv->len = __cpu_to_le16(sizeof(*cmd));
+ cmd = (void *)tlv->value;
+ cmd->prob_req_oui = __cpu_to_le32(prob_req_oui);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv scan prob req oui\n");
+ return skb;
+}
+
+static struct sk_buff *
ath10k_wmi_tlv_op_gen_beacon_dma(struct ath10k *ar, u32 vdev_id,
const void *bcn, size_t bcn_len,
u32 bcn_paddr, bool dtim_zero,
@@ -3366,6 +3389,7 @@ static struct wmi_cmd_map wmi_tlv_cmd_map = {
.stop_scan_cmdid = WMI_TLV_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_TLV_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_TLV_SCAN_SCH_PRIO_TBL_CMDID,
+ .scan_prob_req_oui_cmdid = WMI_TLV_SCAN_PROB_REQ_OUI_CMDID,
.pdev_set_regdomain_cmdid = WMI_TLV_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_TLV_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_TLV_PDEV_SET_PARAM_CMDID,
@@ -3734,6 +3758,7 @@ static const struct wmi_ops wmi_tlv_ops = {
.gen_set_sta_ps = ath10k_wmi_tlv_op_gen_set_sta_ps,
.gen_set_ap_ps = ath10k_wmi_tlv_op_gen_set_ap_ps,
.gen_scan_chan_list = ath10k_wmi_tlv_op_gen_scan_chan_list,
+ .gen_scan_prob_req_oui = ath10k_wmi_tlv_op_gen_scan_prob_req_oui,
.gen_beacon_dma = ath10k_wmi_tlv_op_gen_beacon_dma,
.gen_pdev_set_wmm = ath10k_wmi_tlv_op_gen_pdev_set_wmm,
.gen_request_stats = ath10k_wmi_tlv_op_gen_request_stats,
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 2889225..e8ec1c3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1695,6 +1695,15 @@ struct wmi_tlv_scan_chan_list_cmd {
__le32 num_scan_chans;
} __packed;
+struct wmi_scan_prob_req_oui_cmd {
+/* OUI to be used in Probe Request frame when random MAC address is
+ * requested part of scan parameters. This is applied to both FW internal
+ * scans and host initiated scans. Host can request for random MAC address
+ * with WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ flag.
+ */
+ __le32 prob_req_oui;
+} __packed;
+
struct wmi_tlv_start_scan_cmd {
struct wmi_start_scan_common common;
__le32 burst_duration_ms;
@@ -1703,6 +1712,8 @@ struct wmi_tlv_start_scan_cmd {
__le32 num_ssids;
__le32 ie_len;
__le32 num_probes;
+ struct wmi_mac_addr mac_addr;
+ struct wmi_mac_addr mac_mask;
} __packed;
struct wmi_tlv_vdev_start_cmd {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 4aca166..04b5606 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -41,6 +41,7 @@ static struct wmi_cmd_map wmi_cmd_map = {
.stop_scan_cmdid = WMI_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_SCAN_SCH_PRIO_TBL_CMDID,
+ .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
.pdev_set_regdomain_cmdid = WMI_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_PDEV_SET_PARAM_CMDID,
@@ -205,6 +206,7 @@ static struct wmi_cmd_map wmi_10x_cmd_map = {
.stop_scan_cmdid = WMI_10X_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_10X_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED,
+ .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
.pdev_set_regdomain_cmdid = WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_10X_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_10X_PDEV_SET_PARAM_CMDID,
@@ -371,6 +373,7 @@ static struct wmi_cmd_map wmi_10_2_4_cmd_map = {
.stop_scan_cmdid = WMI_10_2_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_10_2_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED,
+ .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
.pdev_set_regdomain_cmdid = WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_10_2_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_10_2_PDEV_SET_PARAM_CMDID,
@@ -537,6 +540,7 @@ static struct wmi_cmd_map wmi_10_4_cmd_map = {
.stop_scan_cmdid = WMI_10_4_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_10_4_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
+ .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
.pdev_set_regdomain_cmdid = WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_10_4_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_10_4_PDEV_SET_PARAM_CMDID,
@@ -1334,6 +1338,7 @@ static struct wmi_cmd_map wmi_10_2_cmd_map = {
.stop_scan_cmdid = WMI_10_2_STOP_SCAN_CMDID,
.scan_chan_list_cmdid = WMI_10_2_SCAN_CHAN_LIST_CMDID,
.scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED,
+ .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
.pdev_set_regdomain_cmdid = WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
.pdev_set_channel_cmdid = WMI_10_2_PDEV_SET_CHANNEL_CMDID,
.pdev_set_param_cmdid = WMI_10_2_PDEV_SET_PARAM_CMDID,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 6919618..3dd8f76 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -767,6 +767,7 @@ struct wmi_cmd_map {
u32 stop_scan_cmdid;
u32 scan_chan_list_cmdid;
u32 scan_sch_prio_tbl_cmdid;
+ u32 scan_prob_req_oui_cmdid;
u32 pdev_set_regdomain_cmdid;
u32 pdev_set_channel_cmdid;
u32 pdev_set_param_cmdid;
@@ -3144,6 +3145,8 @@ struct wmi_start_scan_arg {
u16 channels[64];
struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
+ struct wmi_mac_addr mac_addr;
+ struct wmi_mac_addr mac_mask;
};
/* scan control flags */
@@ -3167,6 +3170,12 @@ struct wmi_start_scan_arg {
*/
#define WMI_SCAN_CONTINUE_ON_ERROR 0x80
+/* Use random MAC address for TA for Probe Request frame and add
+ * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
+ * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
+ */
+#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000
+
/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
#define WMI_SCAN_CLASS_MASK 0xFF000000
--
2.7.4
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2018-03-30 3:14 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-30 3:13 [PATCH 0/2] ath10k: support MAC address randomization in scan Carl Huang
2018-03-30 3:13 ` Carl Huang
2018-03-30 3:13 ` [PATCH 1/2] ath10k: Add WMI_SERVICE_AVAILABLE_EVENT support Carl Huang
2018-03-30 3:13 ` Carl Huang
2018-04-16 13:40 ` [1/2] " Kalle Valo
2018-04-16 13:40 ` Kalle Valo
2018-04-24 5:46 ` Kalle Valo
2018-04-24 5:46 ` Kalle Valo
2018-03-30 3:14 ` Carl Huang [this message]
2018-03-30 3:14 ` [PATCH 2/2] ath10k: support MAC address randomization in scan Carl Huang
2018-04-12 20:59 ` Brian Norris
2018-04-12 20:59 ` Brian Norris
2018-04-13 6:53 ` cjhuang
2018-04-13 6:53 ` cjhuang
2018-04-13 11:28 ` Kalle Valo
2018-04-13 11:28 ` Kalle Valo
2018-04-13 21:13 ` Arend van Spriel
2018-04-13 21:13 ` Arend van Spriel
2018-04-16 5:16 ` cjhuang
2018-04-16 5:16 ` cjhuang
2018-04-16 11:32 ` Kalle Valo
2018-04-16 11:32 ` Kalle Valo
2018-04-17 0:28 ` Brian Norris
2018-04-17 0:28 ` Brian Norris
2018-04-17 8:22 ` Arend van Spriel
2018-04-17 8:22 ` Arend van Spriel
2018-04-17 16:07 ` Brian Norris
2018-04-17 16:07 ` Brian Norris
2018-04-17 21:49 ` Arend van Spriel
2018-04-17 21:49 ` Arend van Spriel
2018-04-17 22:26 ` Brian Norris
2018-04-17 22:26 ` Brian Norris
2018-04-18 2:35 ` Dan Williams
2018-04-18 2:35 ` Dan Williams
2018-04-18 8:29 ` Arend van Spriel
2018-04-18 8:29 ` Arend van Spriel
2018-04-18 9:58 ` Johannes Berg
2018-04-18 9:58 ` Johannes Berg
2018-04-16 5:17 ` cjhuang
2018-04-16 5:17 ` cjhuang
2018-04-16 13:42 ` [2/2] " Kalle Valo
2018-04-16 13:42 ` Kalle Valo
[not found] ` <20180416134238.B16596076A@smtp.codeaurora.org>
2018-04-17 7:29 ` cjhuang
2018-04-17 7:29 ` cjhuang
2018-04-20 10:30 ` Kalle Valo
2018-04-20 10:30 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1522379640-6442-3-git-send-email-cjhuang@codeaurora.org \
--to=cjhuang@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.