All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sricharan R <sricharan@codeaurora.org>
To: robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com,
	linux@armlinux.org.uk, andy.gross@linaro.org,
	david.brown@linaro.org, catalin.marinas@arm.com,
	will.deacon@arm.com, sboyd@codeaurora.org,
	bjorn.andersson@linaro.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	absahu@codeaurora.org, marc.zyngier@arm.com,
	richardcochran@gmail.com, sricharan@codeaurora.org
Subject: [PATCH v8 07/12] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
Date: Fri, 25 May 2018 11:41:17 +0530	[thread overview]
Message-ID: <1527228682-12285-8-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1527228682-12285-1-git-send-email-sricharan@codeaurora.org>

Add the common data for all dk07 based boards.

Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 75 +++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
new file mode 100644
index 0000000..9f1a5a66
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinctrl@1000000 {
+			serial_0_pins: serial0-pinmux {
+				pins = "gpio16", "gpio17";
+				function = "blsp_uart0";
+				bias-disable;
+			};
+
+			i2c_0_pins: i2c-0-pinmux {
+				pins = "gpio20", "gpio21";
+				function = "blsp_i2c0";
+				bias-disable;
+			};
+
+			nand_pins: nand-pins {
+				pins = "gpio53", "gpio55", "gpio56",
+				       "gpio57", "gpio58", "gpio59",
+				       "gpio60", "gpio62", "gpio63",
+				       "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68", "gpio69";
+				function = "qpic";
+                        };
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		dma@7884000 {
+			status = "ok";
+		};
+
+		i2c@78b7000 { /* BLSP1 QUP2 */
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		dma@7984000 {
+			status = "ok";
+		};
+
+		qpic-nand@79b0000 {
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+	};
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sricharan@codeaurora.org (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 07/12] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
Date: Fri, 25 May 2018 11:41:17 +0530	[thread overview]
Message-ID: <1527228682-12285-8-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1527228682-12285-1-git-send-email-sricharan@codeaurora.org>

Add the common data for all dk07 based boards.

Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 75 +++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
new file mode 100644
index 0000000..9f1a5a66
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinctrl at 1000000 {
+			serial_0_pins: serial0-pinmux {
+				pins = "gpio16", "gpio17";
+				function = "blsp_uart0";
+				bias-disable;
+			};
+
+			i2c_0_pins: i2c-0-pinmux {
+				pins = "gpio20", "gpio21";
+				function = "blsp_i2c0";
+				bias-disable;
+			};
+
+			nand_pins: nand-pins {
+				pins = "gpio53", "gpio55", "gpio56",
+				       "gpio57", "gpio58", "gpio59",
+				       "gpio60", "gpio62", "gpio63",
+				       "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68", "gpio69";
+				function = "qpic";
+                        };
+		};
+
+		serial at 78af000 {
+			pinctrl-0 = <&serial_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		dma at 7884000 {
+			status = "ok";
+		};
+
+		i2c at 78b7000 { /* BLSP1 QUP2 */
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		dma at 7984000 {
+			status = "ok";
+		};
+
+		qpic-nand at 79b0000 {
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+	};
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2018-05-25  6:11 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-25  6:11 [PATCH v8 00/12] ARM: dts: ipq: updates to enable a few peripherals Sricharan R
2018-05-25  6:11 ` Sricharan R
2018-05-25  6:11 ` [PATCH v8 01/12] ARM: dts: ipq4019: Add a default chosen node Sricharan R
2018-05-25  6:11   ` Sricharan R
2018-05-25  6:11 ` [PATCH v8 02/12] ARM: dts: ipq4019: Add a few peripheral nodes Sricharan R
2018-05-25  6:11   ` Sricharan R
2018-05-25  6:11 ` [PATCH v8 03/12] ARM: dts: ipq4019: Change the max opp frequency Sricharan R
2018-05-25  6:11   ` Sricharan R
2018-05-25  6:11 ` [PATCH v8 04/12] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi Sricharan R
2018-05-25  6:11   ` Sricharan R
2018-05-25  6:11 ` [PATCH v8 05/12] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file Sricharan R
2018-05-25  6:11   ` Sricharan R
2018-05-25  6:11 ` [PATCH v8 06/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 " Sricharan R
2018-05-25  6:11   ` Sricharan R
2018-05-25  6:11 ` Sricharan R [this message]
2018-05-25  6:11   ` [PATCH v8 07/12] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data Sricharan R
2018-05-25  6:11 ` [PATCH v8 08/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file Sricharan R
2018-05-25  6:11   ` Sricharan R
2018-05-25  6:11 ` [PATCH v8 09/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 " Sricharan R
2018-05-25  6:11   ` Sricharan R
2018-05-25  6:11 ` [PATCH v8 10/12] ARM: dts: ipq8074: Add peripheral nodes Sricharan R
2018-05-25  6:11   ` Sricharan R
2018-05-25  6:11 ` [PATCH v8 11/12] ARM: dts: ipq8074: Add pcie nodes Sricharan R
2018-05-25  6:11   ` Sricharan R
2018-05-25  6:11 ` [PATCH v8 12/12] ARM: dts: ipq8074: Enable few peripherals for hk01 board Sricharan R
2018-05-25  6:11   ` Sricharan R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1527228682-12285-8-git-send-email-sricharan@codeaurora.org \
    --to=sricharan@codeaurora.org \
    --cc=absahu@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=richardcochran@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.