All of lore.kernel.org
 help / color / mirror / Atom feed
From: Amit Nischal <anischal@codeaurora.org>
To: Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>
Cc: Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	Odelu Kukatla <okukatla@codeaurora.org>,
	Taniya Das <tdas@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	Amit Nischal <anischal@codeaurora.org>
Subject: [PATCH v2 1/4] clk: qcom: gdsc: Add support to enable/disable the clocks with GDSC
Date: Thu, 12 Jul 2018 22:39:38 +0530	[thread overview]
Message-ID: <1531415381-16885-2-git-send-email-anischal@codeaurora.org> (raw)
In-Reply-To: <1531415381-16885-1-git-send-email-anischal@codeaurora.org>

For some of the GDSCs, there is a requirement to enable/disable the
few clocks before turning on/off the gdsc power domain. Add support
for the same by specifying a list of clk_hw pointers per gdsc and
enable/disable them along with power domain on/off callbacks.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
---
 drivers/clk/qcom/gdsc.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/qcom/gdsc.h |  5 +++++
 2 files changed, 49 insertions(+)

diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index a077133..b6adca1 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -12,6 +12,8 @@
  */
 
 #include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/jiffies.h>
@@ -208,11 +210,41 @@ static inline void gdsc_assert_reset_aon(struct gdsc *sc)
 	regmap_update_bits(sc->regmap, sc->clamp_io_ctrl,
 			   GMEM_RESET_MASK, 0);
 }
+
+static int gdsc_clk_prepare_enable(struct gdsc *sc)
+{
+	int i, ret;
+
+	for (i = 0; i < sc->clk_count; i++) {
+		ret = clk_prepare_enable(sc->clk_hws[i]->clk);
+		if (ret) {
+			for (i--; i >= 0; i--)
+				clk_disable_unprepare(sc->clk_hws[i]->clk);
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static void gdsc_clk_disable_unprepare(struct gdsc *sc)
+{
+	int i;
+
+	for (i = 0; i < sc->clk_count; i++)
+		clk_disable_unprepare(sc->clk_hws[i]->clk);
+}
+
 static int gdsc_enable(struct generic_pm_domain *domain)
 {
 	struct gdsc *sc = domain_to_gdsc(domain);
 	int ret;
 
+	if (sc->clk_count) {
+		ret = gdsc_clk_prepare_enable(sc);
+		if (ret)
+			return ret;
+	}
+
 	if (sc->pwrsts == PWRSTS_ON)
 		return gdsc_deassert_reset(sc);
 
@@ -260,6 +292,9 @@ static int gdsc_enable(struct generic_pm_domain *domain)
 		udelay(1);
 	}
 
+	if (sc->clk_count)
+		gdsc_clk_disable_unprepare(sc);
+
 	return 0;
 }
 
@@ -268,6 +303,12 @@ static int gdsc_disable(struct generic_pm_domain *domain)
 	struct gdsc *sc = domain_to_gdsc(domain);
 	int ret;
 
+	if (sc->clk_count) {
+		ret = gdsc_clk_prepare_enable(sc);
+		if (ret)
+			return ret;
+	}
+
 	if (sc->pwrsts == PWRSTS_ON)
 		return gdsc_assert_reset(sc);
 
@@ -299,6 +340,9 @@ static int gdsc_disable(struct generic_pm_domain *domain)
 	if (sc->flags & CLAMP_IO)
 		gdsc_assert_clamp_io(sc);
 
+	if (sc->clk_count)
+		gdsc_clk_disable_unprepare(sc);
+
 	return 0;
 }
 
diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
index bd1f2c7..59957d7 100644
--- a/drivers/clk/qcom/gdsc.h
+++ b/drivers/clk/qcom/gdsc.h
@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/pm_domain.h>
 
+struct clk_hw;
 struct regmap;
 struct reset_controller_dev;
 
@@ -32,6 +33,8 @@
  * @resets: ids of resets associated with this gdsc
  * @reset_count: number of @resets
  * @rcdev: reset controller
+ * @clk_count: number of associated clocks
+ * @clk_hws: clk_hw pointers for associated clocks with gdsc
  */
 struct gdsc {
 	struct generic_pm_domain	pd;
@@ -60,6 +63,8 @@ struct gdsc {
 	struct reset_controller_dev	*rcdev;
 	unsigned int			*resets;
 	unsigned int			reset_count;
+	unsigned int			clk_count;
+	struct clk_hw			*clk_hws[];
 };
 
 struct gdsc_desc {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

  reply	other threads:[~2018-07-12 17:09 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-12 17:09 [PATCH v2 0/4] Add QCOM graphics clock controller driver for SDM845 Amit Nischal
2018-07-12 17:09 ` Amit Nischal [this message]
2018-07-12 17:09 ` [PATCH v2 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops " Amit Nischal
2018-07-12 17:09 ` [PATCH v2 3/4] dt-bindings: clock: Introduce QCOM Graphics clock bindings Amit Nischal
2018-07-12 17:09 ` [PATCH v2 4/4] clk: qcom: Add graphics clock controller driver for SDM845 Amit Nischal
2018-07-14  0:46   ` kbuild test robot
2018-07-14  0:46     ` kbuild test robot
2018-07-14  3:20   ` kbuild test robot
2018-07-14  3:20     ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1531415381-16885-2-git-send-email-anischal@codeaurora.org \
    --to=anischal@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=okukatla@codeaurora.org \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@kernel.org \
    --cc=tdas@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.