All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ulrich Hecht <uli+renesas@fpond.eu>
To: linux-renesas-soc@vger.kernel.org, geert@linux-m68k.org,
	wsa@the-dreams.de
Cc: Takeshi Kihara <takeshi.kihara.df@renesas.com>,
	Ulrich Hecht <uli+renesas@fpond.eu>
Subject: [PATCH v2 3/4] pinctrl: sh-pfc: r8a7795-es1: Add I2C{0,3,5} pins, groups and functions
Date: Fri, 16 Nov 2018 15:20:50 +0800	[thread overview]
Message-ID: <1542352851-25393-4-git-send-email-uli+renesas@fpond.eu> (raw)
In-Reply-To: <1542352851-25393-1-git-send-email-uli+renesas@fpond.eu>

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch adds I2C{0,3,5} pins, groups and functions to
the R8A7795 ES1.x SoC.

These pins are physically muxed with other pins. Therefore, setup of
MOD_SEL is needed for exclusive control with other pins.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c | 97 ++++++++++++++++++++++++--------
 1 file changed, 75 insertions(+), 22 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
index 8c7de44..59cb0d7 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
@@ -537,6 +537,9 @@ MOD_SEL0_2_1		MOD_SEL1_2 \
 	FM(DU_DOTCLKIN0) FM(DU_DOTCLKIN1) FM(DU_DOTCLKIN2) FM(DU_DOTCLKIN3) \
 	FM(TMS) FM(TDO) FM(ASEBRK) FM(MLB_REF) FM(TDI) FM(TCK) FM(TRST) FM(EXTALR)
 
+#define PINMUX_PHYS \
+	FM(SCL0) FM(SDA0) FM(SCL3) FM(SDA3) FM(SCL5) FM(SDA5)
+
 enum {
 	PINMUX_RESERVED = 0,
 
@@ -562,6 +565,7 @@ enum {
 	PINMUX_IPSR
 	PINMUX_MOD_SELS
 	PINMUX_STATIC
+	PINMUX_PHYS
 	PINMUX_MARK_END,
 #undef F_
 #undef FM
@@ -574,9 +578,6 @@ static const u16 pinmux_data[] = {
 	PINMUX_SINGLE(AVS2),
 	PINMUX_SINGLE(HDMI0_CEC),
 	PINMUX_SINGLE(HDMI1_CEC),
-	PINMUX_SINGLE(I2C_SEL_0_1),
-	PINMUX_SINGLE(I2C_SEL_3_1),
-	PINMUX_SINGLE(I2C_SEL_5_1),
 	PINMUX_SINGLE(MSIOF0_RXD),
 	PINMUX_SINGLE(MSIOF0_SCK),
 	PINMUX_SINGLE(MSIOF0_TXD),
@@ -608,13 +609,15 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_MSEL(IP0_15_12,	MSIOF2_SCK_C,		SEL_MSIOF2_2),
 	PINMUX_IPSR_MSEL(IP0_15_12,	TX4_A,			SEL_SCIF4_0),
 
-	PINMUX_IPSR_MSEL(IP0_19_16,	AVB_AVTP_MATCH_A,	SEL_ETHERAVB_0),
-	PINMUX_IPSR_MSEL(IP0_19_16,	MSIOF2_RXD_C,		SEL_MSIOF2_2),
-	PINMUX_IPSR_MSEL(IP0_19_16,	CTS4_N_A,		SEL_SCIF4_0),
+	PINMUX_IPSR_MSEL2(IP0_19_16,	AVB_AVTP_MATCH_A,	I2C_SEL_5_0, SEL_ETHERAVB_0),
+	PINMUX_IPSR_MSEL2(IP0_19_16,	MSIOF2_RXD_C,		I2C_SEL_5_0, SEL_MSIOF2_2),
+	PINMUX_IPSR_MSEL2(IP0_19_16,	CTS4_N_A,		I2C_SEL_5_0, SEL_SCIF4_0),
+	PINMUX_IPSR_PHYS(IP0_19_16,	SCL5,			I2C_SEL_5_1),
 
-	PINMUX_IPSR_MSEL(IP0_23_20,	AVB_AVTP_CAPTURE_A,	SEL_ETHERAVB_0),
-	PINMUX_IPSR_MSEL(IP0_23_20,	MSIOF2_TXD_C,		SEL_MSIOF2_2),
-	PINMUX_IPSR_MSEL(IP0_23_20,	RTS4_N_TANS_A,		SEL_SCIF4_0),
+	PINMUX_IPSR_MSEL2(IP0_23_20,	AVB_AVTP_CAPTURE_A,	I2C_SEL_5_0, SEL_ETHERAVB_0),
+	PINMUX_IPSR_MSEL2(IP0_23_20,	MSIOF2_TXD_C,		I2C_SEL_5_0, SEL_MSIOF2_2),
+	PINMUX_IPSR_MSEL2(IP0_23_20,	RTS4_N_TANS_A,		I2C_SEL_5_0, SEL_SCIF4_0),
+	PINMUX_IPSR_PHYS(IP0_23_20,	SDA5,			I2C_SEL_5_1),
 
 	PINMUX_IPSR_GPSR(IP0_27_24,	IRQ0),
 	PINMUX_IPSR_GPSR(IP0_27_24,	QPOLB),
@@ -664,16 +667,18 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_MSEL(IP1_19_16,	VI4_DATA6_B,		SEL_VIN4_1),
 	PINMUX_IPSR_MSEL(IP1_19_16,	IECLK_B,		SEL_IEBUS_1),
 
-	PINMUX_IPSR_MSEL(IP1_23_20,	PWM1_A,			SEL_PWM1_0),
-	PINMUX_IPSR_GPSR(IP1_23_20,	A21),
-	PINMUX_IPSR_MSEL(IP1_23_20,	HRX3_D,			SEL_HSCIF3_3),
-	PINMUX_IPSR_MSEL(IP1_23_20,	VI4_DATA7_B,		SEL_VIN4_1),
-	PINMUX_IPSR_MSEL(IP1_23_20,	IERX_B,			SEL_IEBUS_1),
+	PINMUX_IPSR_MSEL2(IP1_23_20,	PWM1_A,		I2C_SEL_3_0,	SEL_PWM1_0),
+	PINMUX_IPSR_MSEL(IP1_23_20,	A21,		I2C_SEL_3_0),
+	PINMUX_IPSR_MSEL2(IP1_23_20,	HRX3_D,		I2C_SEL_3_0,	SEL_HSCIF3_3),
+	PINMUX_IPSR_MSEL2(IP1_23_20,	VI4_DATA7_B,	I2C_SEL_3_0,	SEL_VIN4_1),
+	PINMUX_IPSR_MSEL2(IP1_23_20,	IERX_B,		I2C_SEL_3_0,	SEL_IEBUS_1),
+	PINMUX_IPSR_PHYS(IP0_23_20,	SCL3,		I2C_SEL_3_1),
 
-	PINMUX_IPSR_MSEL(IP1_27_24,	PWM2_A,			SEL_PWM2_0),
-	PINMUX_IPSR_GPSR(IP1_27_24,	A20),
-	PINMUX_IPSR_MSEL(IP1_27_24,	HTX3_D,			SEL_HSCIF3_3),
-	PINMUX_IPSR_MSEL(IP1_27_24,	IETX_B,			SEL_IEBUS_1),
+	PINMUX_IPSR_MSEL2(IP1_27_24,	PWM2_A,		I2C_SEL_3_0,	SEL_PWM2_0),
+	PINMUX_IPSR_MSEL(IP1_27_24,	A20,		I2C_SEL_3_0),
+	PINMUX_IPSR_MSEL2(IP1_27_24,	HTX3_D,		I2C_SEL_3_0,	SEL_HSCIF3_3),
+	PINMUX_IPSR_MSEL2(IP1_27_24,	IETX_B,		I2C_SEL_3_0,	SEL_IEBUS_1),
+	PINMUX_IPSR_PHYS(IP1_27_24,	SDA3,		I2C_SEL_3_1),
 
 	PINMUX_IPSR_GPSR(IP1_31_28,	A0),
 	PINMUX_IPSR_GPSR(IP1_31_28,	LCDOUT16),
@@ -1067,11 +1072,13 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_GPSR(IP10_15_12,	SD0_WP),
 	PINMUX_IPSR_MSEL(IP10_15_12,	SDA2_B,			SEL_I2C2_1),
 
-	PINMUX_IPSR_GPSR(IP10_19_16,	SD1_CD),
-	PINMUX_IPSR_MSEL(IP10_19_16,	SIM0_CLK_B,		SEL_SIMCARD_1),
+	PINMUX_IPSR_MSEL(IP10_19_16,	SD1_CD,			I2C_SEL_0_0),
+	PINMUX_IPSR_MSEL2(IP10_19_16,	SIM0_CLK_B,		I2C_SEL_0_0, SEL_SIMCARD_1),
+	PINMUX_IPSR_PHYS(IP10_19_16,	SCL0,			I2C_SEL_0_1),
 
-	PINMUX_IPSR_GPSR(IP10_23_20,	SD1_WP),
-	PINMUX_IPSR_MSEL(IP10_23_20,	SIM0_D_B,		SEL_SIMCARD_1),
+	PINMUX_IPSR_MSEL(IP10_23_20,	SD1_WP,			I2C_SEL_0_0),
+	PINMUX_IPSR_MSEL2(IP10_23_20,	SIM0_D_B,		I2C_SEL_0_0, SEL_SIMCARD_1),
+	PINMUX_IPSR_PHYS(IP10_23_20,	SDA0,			I2C_SEL_0_1),
 
 	PINMUX_IPSR_GPSR(IP10_27_24,	SCK0),
 	PINMUX_IPSR_MSEL(IP10_27_24,	HSCK1_B,		SEL_HSCIF1_1),
@@ -2266,6 +2273,15 @@ static const unsigned int hscif4_data_b_mux[] = {
 };
 
 /* - I2C -------------------------------------------------------------------- */
+static const unsigned int i2c0_pins[] = {
+	/* SCL, SDA */
+	RCAR_GP_PIN(3, 14), RCAR_GP_PIN(3, 15),
+};
+
+static const unsigned int i2c0_mux[] = {
+	SCL0_MARK, SDA0_MARK,
+};
+
 static const unsigned int i2c1_a_pins[] = {
 	/* SDA, SCL */
 	RCAR_GP_PIN(5, 11), RCAR_GP_PIN(5, 10),
@@ -2294,6 +2310,25 @@ static const unsigned int i2c2_b_pins[] = {
 static const unsigned int i2c2_b_mux[] = {
 	SDA2_B_MARK, SCL2_B_MARK,
 };
+
+static const unsigned int i2c3_pins[] = {
+	/* SCL, SDA */
+	RCAR_GP_PIN(2, 7), RCAR_GP_PIN(2, 8),
+};
+
+static const unsigned int i2c3_mux[] = {
+	SCL3_MARK, SDA3_MARK,
+};
+
+static const unsigned int i2c5_pins[] = {
+	/* SCL, SDA */
+	RCAR_GP_PIN(2, 13), RCAR_GP_PIN(2, 14),
+};
+
+static const unsigned int i2c5_mux[] = {
+	SCL5_MARK, SDA5_MARK,
+};
+
 static const unsigned int i2c6_a_pins[] = {
 	/* SDA, SCL */
 	RCAR_GP_PIN(1, 8), RCAR_GP_PIN(1, 11),
@@ -3936,10 +3971,13 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
 	SH_PFC_PIN_GROUP(hscif4_clk),
 	SH_PFC_PIN_GROUP(hscif4_ctrl),
 	SH_PFC_PIN_GROUP(hscif4_data_b),
+	SH_PFC_PIN_GROUP(i2c0),
 	SH_PFC_PIN_GROUP(i2c1_a),
 	SH_PFC_PIN_GROUP(i2c1_b),
 	SH_PFC_PIN_GROUP(i2c2_a),
 	SH_PFC_PIN_GROUP(i2c2_b),
+	SH_PFC_PIN_GROUP(i2c3),
+	SH_PFC_PIN_GROUP(i2c5),
 	SH_PFC_PIN_GROUP(i2c6_a),
 	SH_PFC_PIN_GROUP(i2c6_b),
 	SH_PFC_PIN_GROUP(i2c6_c),
@@ -4309,6 +4347,10 @@ static const char * const hscif4_groups[] = {
 	"hscif4_data_b",
 };
 
+static const char * const i2c0_groups[] = {
+	"i2c0",
+};
+
 static const char * const i2c1_groups[] = {
 	"i2c1_a",
 	"i2c1_b",
@@ -4319,6 +4361,14 @@ static const char * const i2c2_groups[] = {
 	"i2c2_b",
 };
 
+static const char * const i2c3_groups[] = {
+	"i2c3",
+};
+
+static const char * const i2c5_groups[] = {
+	"i2c5",
+};
+
 static const char * const i2c6_groups[] = {
 	"i2c6_a",
 	"i2c6_b",
@@ -4651,8 +4701,11 @@ static const struct sh_pfc_function pinmux_functions[] = {
 	SH_PFC_FUNCTION(hscif2),
 	SH_PFC_FUNCTION(hscif3),
 	SH_PFC_FUNCTION(hscif4),
+	SH_PFC_FUNCTION(i2c0),
 	SH_PFC_FUNCTION(i2c1),
 	SH_PFC_FUNCTION(i2c2),
+	SH_PFC_FUNCTION(i2c3),
+	SH_PFC_FUNCTION(i2c5),
 	SH_PFC_FUNCTION(i2c6),
 	SH_PFC_FUNCTION(intc_ex),
 	SH_PFC_FUNCTION(msiof0),
-- 
2.7.4

  parent reply	other threads:[~2018-11-16 17:33 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-16  7:20 [PATCH v2 0/4] I2C0/3/5 pin control for H3 and M3-W Ulrich Hecht
2018-11-16  7:20 ` [PATCH v2 1/4] pinctrl: sh-pfc: Add physical pin multiplexing helper macros Ulrich Hecht
2018-11-16  8:42   ` Geert Uytterhoeven
2018-11-16 23:50     ` Ulrich Hecht
2018-11-16  7:20 ` [PATCH v2 2/4] pinctrl: sh-pfc: r8a7795: Add I2C{0,3,5} pins, groups and functions Ulrich Hecht
2018-11-16  8:39   ` Geert Uytterhoeven
2018-11-16  7:20 ` Ulrich Hecht [this message]
2018-11-16  8:40   ` [PATCH v2 3/4] pinctrl: sh-pfc: r8a7795-es1: " Geert Uytterhoeven
2018-11-16  7:20 ` [PATCH v2 4/4] pinctrl: sh-pfc: r8a7796: " Ulrich Hecht
2018-11-16  8:40   ` Geert Uytterhoeven
2018-11-16  8:30 ` [PATCH v2 0/4] I2C0/3/5 pin control for H3 and M3-W Geert Uytterhoeven
2018-12-05 21:23 ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1542352851-25393-4-git-send-email-uli+renesas@fpond.eu \
    --to=uli+renesas@fpond.eu \
    --cc=geert@linux-m68k.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=takeshi.kihara.df@renesas.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.