From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: niklas.soderlund@ragnatech.se, laurent.pinchart@ideasonboard.com,
kieran.bingham@ideasonboard.com
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: [PATCH] media: rcar-csi2: Fix PHTW table values for E3/V3M
Date: Mon, 10 Dec 2018 15:53:55 +0100 [thread overview]
Message-ID: <1544453635-16359-1-git-send-email-jacopo+renesas@jmondi.org> (raw)
The PHTW selection algorithm implemented in rcsi2_phtw_write_mbps() checks for
lower bound of the interval used to match the desired bandwidth. Use that
in place of the currently used upport bound.
Fixes: 10c08812fe60 ("media: rcar: rcar-csi2: Update V3M/E3 PHTW tables")
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 62 ++++++++++++++---------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 80ad906d1136..7e9cb8bcfe70 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -152,37 +152,37 @@ static const struct rcsi2_mbps_reg phtw_mbps_h3_v3h_m3n[] = {
};
static const struct rcsi2_mbps_reg phtw_mbps_v3m_e3[] = {
- { .mbps = 89, .reg = 0x00 },
- { .mbps = 99, .reg = 0x20 },
- { .mbps = 109, .reg = 0x40 },
- { .mbps = 129, .reg = 0x02 },
- { .mbps = 139, .reg = 0x22 },
- { .mbps = 149, .reg = 0x42 },
- { .mbps = 169, .reg = 0x04 },
- { .mbps = 179, .reg = 0x24 },
- { .mbps = 199, .reg = 0x44 },
- { .mbps = 219, .reg = 0x06 },
- { .mbps = 239, .reg = 0x26 },
- { .mbps = 249, .reg = 0x46 },
- { .mbps = 269, .reg = 0x08 },
- { .mbps = 299, .reg = 0x28 },
- { .mbps = 329, .reg = 0x0a },
- { .mbps = 359, .reg = 0x2a },
- { .mbps = 399, .reg = 0x4a },
- { .mbps = 449, .reg = 0x0c },
- { .mbps = 499, .reg = 0x2c },
- { .mbps = 549, .reg = 0x0e },
- { .mbps = 599, .reg = 0x2e },
- { .mbps = 649, .reg = 0x10 },
- { .mbps = 699, .reg = 0x30 },
- { .mbps = 749, .reg = 0x12 },
- { .mbps = 799, .reg = 0x32 },
- { .mbps = 849, .reg = 0x52 },
- { .mbps = 899, .reg = 0x72 },
- { .mbps = 949, .reg = 0x14 },
- { .mbps = 999, .reg = 0x34 },
- { .mbps = 1049, .reg = 0x54 },
- { .mbps = 1099, .reg = 0x74 },
+ { .mbps = 80, .reg = 0x00 },
+ { .mbps = 90, .reg = 0x20 },
+ { .mbps = 100, .reg = 0x40 },
+ { .mbps = 110, .reg = 0x02 },
+ { .mbps = 130, .reg = 0x22 },
+ { .mbps = 140, .reg = 0x42 },
+ { .mbps = 150, .reg = 0x04 },
+ { .mbps = 170, .reg = 0x24 },
+ { .mbps = 180, .reg = 0x44 },
+ { .mbps = 200, .reg = 0x06 },
+ { .mbps = 220, .reg = 0x26 },
+ { .mbps = 240, .reg = 0x46 },
+ { .mbps = 250, .reg = 0x08 },
+ { .mbps = 270, .reg = 0x28 },
+ { .mbps = 300, .reg = 0x0a },
+ { .mbps = 330, .reg = 0x2a },
+ { .mbps = 360, .reg = 0x4a },
+ { .mbps = 400, .reg = 0x0c },
+ { .mbps = 450, .reg = 0x2c },
+ { .mbps = 500, .reg = 0x0e },
+ { .mbps = 550, .reg = 0x2e },
+ { .mbps = 600, .reg = 0x10 },
+ { .mbps = 650, .reg = 0x30 },
+ { .mbps = 700, .reg = 0x12 },
+ { .mbps = 750, .reg = 0x32 },
+ { .mbps = 800, .reg = 0x52 },
+ { .mbps = 850, .reg = 0x72 },
+ { .mbps = 900, .reg = 0x14 },
+ { .mbps = 950, .reg = 0x34 },
+ { .mbps = 1000, .reg = 0x54 },
+ { .mbps = 1050, .reg = 0x74 },
{ .mbps = 1125, .reg = 0x16 },
{ /* sentinel */ },
};
--
2.7.4
next reply other threads:[~2018-12-10 14:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 14:53 Jacopo Mondi [this message]
2018-12-10 15:24 ` [PATCH] media: rcar-csi2: Fix PHTW table values for E3/V3M Niklas Söderlund
2018-12-10 15:24 ` Niklas Söderlund
2018-12-10 20:16 ` Laurent Pinchart
2018-12-11 2:01 ` Niklas Söderlund
2018-12-11 2:01 ` Niklas Söderlund
2018-12-11 7:49 ` Laurent Pinchart
2018-12-11 11:33 ` jacopo mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1544453635-16359-1-git-send-email-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund@ragnatech.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.