From: Schrempf Frieder <frieder.schrempf@kontron.de>
To: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
NXP Linux Team <linux-imx@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: "boris.brezillon@bootlin.com" <boris.brezillon@bootlin.com>,
"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
"broonie@kernel.org" <broonie@kernel.org>,
"linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
Schrempf Frieder <frieder.schrempf@kontron.de>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH 3/5] ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
Date: Mon, 10 Dec 2018 16:28:49 +0000 [thread overview]
Message-ID: <1544459182-23655-4-git-send-email-frieder.schrempf@kontron.de> (raw)
In-Reply-To: <1544459182-23655-1-git-send-email-frieder.schrempf@kontron.de>
From: Frieder Schrempf <frieder.schrempf@kontron.de>
The current driver does not use the reg properties, but we will
add a new driver soon. To make sure we have a consistent scheme,
let's fix the reg properties here.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ++--
arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 9cc6ff2..344abc2 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -134,8 +134,8 @@
spi-max-frequency = <66000000>;
};
- flash1: s25fl128s@1 {
- reg = <1>;
+ flash1: s25fl128s@2 {
+ reg = <2>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl128s", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 6dd9beb..5a39703 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -120,12 +120,12 @@
reg = <0>;
};
- flash1: n25q256a@1 {
+ flash1: n25q256a@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
- reg = <1>;
+ reg = <2>;
};
};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Schrempf Frieder <frieder.schrempf@kontron.de>
To: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
NXP Linux Team <linux-imx@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Schrempf Frieder <frieder.schrempf@kontron.de>,
"linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
"boris.brezillon@bootlin.com" <boris.brezillon@bootlin.com>,
"broonie@kernel.org" <broonie@kernel.org>,
"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 3/5] ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
Date: Mon, 10 Dec 2018 16:28:49 +0000 [thread overview]
Message-ID: <1544459182-23655-4-git-send-email-frieder.schrempf@kontron.de> (raw)
In-Reply-To: <1544459182-23655-1-git-send-email-frieder.schrempf@kontron.de>
From: Frieder Schrempf <frieder.schrempf@kontron.de>
The current driver does not use the reg properties, but we will
add a new driver soon. To make sure we have a consistent scheme,
let's fix the reg properties here.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ++--
arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 9cc6ff2..344abc2 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -134,8 +134,8 @@
spi-max-frequency = <66000000>;
};
- flash1: s25fl128s@1 {
- reg = <1>;
+ flash1: s25fl128s@2 {
+ reg = <2>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl128s", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 6dd9beb..5a39703 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -120,12 +120,12 @@
reg = <0>;
};
- flash1: n25q256a@1 {
+ flash1: n25q256a@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
- reg = <1>;
+ reg = <2>;
};
};
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-10 16:28 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 16:28 [PATCH 0/5] Prepare devicetrees for the new FSL QSPI driver Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:28 ` [PATCH 2/5] ARM: dts: Remove unused properties from FSL QSPI driver nodes Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:28 ` [PATCH 1/5] arm64: " Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:28 ` [PATCH 4/5] arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder [this message]
2018-12-10 16:28 ` [PATCH 3/5] ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:28 ` [PATCH 5/5] ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:28 ` Schrempf Frieder
2018-12-10 16:31 ` [PATCH 0/5] Prepare devicetrees for the new FSL QSPI driver Schrempf Frieder
2018-12-10 16:31 ` Schrempf Frieder
2018-12-10 16:31 ` Schrempf Frieder
2018-12-13 9:45 ` Schrempf Frieder
2018-12-13 9:45 ` Schrempf Frieder
2018-12-13 9:45 ` Schrempf Frieder
2018-12-14 0:42 ` Shawn Guo
2018-12-14 0:42 ` Shawn Guo
2018-12-14 0:42 ` Shawn Guo
2018-12-15 10:04 ` AW: " Schrempf Frieder
2018-12-15 10:04 ` Schrempf Frieder
2018-12-15 10:04 ` Schrempf Frieder
2018-12-16 7:51 ` Shawn Guo
2018-12-16 7:51 ` Shawn Guo
2018-12-16 7:51 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1544459182-23655-4-git-send-email-frieder.schrempf@kontron.de \
--to=frieder.schrempf@kontron.de \
--cc=boris.brezillon@bootlin.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.