From: Qii Wang <qii.wang@mediatek.com>
To: <wsa@the-dreams.de>
Cc: <linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <leilk.liu@mediatek.com>,
<qii.wang@mediatek.com>, <xinping.qian@mediatek.com>,
<liguo.zhang@mediatek.com>, <robh@kernel.org>
Subject: [PATCH v6 6/6] dts: arm64: mt8183: Add I2C nodes
Date: Mon, 11 Mar 2019 13:40:40 +0800 [thread overview]
Message-ID: <1552282840-12778-7-git-send-email-qii.wang@mediatek.com> (raw)
In-Reply-To: <1552282840-12778-1-git-send-email-qii.wang@mediatek.com>
This patch adds nodes for I2C controller.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 190 ++++++++++++++++++++++++++++++
1 file changed, 190 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 165b859..f20f1af 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -16,6 +16,21 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -268,6 +283,79 @@
status = "disabled";
};
+ i2c6: i2c@11005000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11005000 0 0x1000>,
+ <0 0x11000600 0 0x80>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C6>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11007000 0 0x1000>,
+ <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C0>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11008000 {
+ compatible = "mediatek,mt8183-i2c";
+ id = <4>;
+ reg = <0 0x11008000 0 0x1000>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C1>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C1_ARBITER>;
+ clock-names = "main", "dma","arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11009000 0 0x1000>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C2>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C2_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@1100f000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1100f000 0 0x1000>,
+ <0 0x11000400 0 0x80>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C3>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi0: spi@1100a000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -294,6 +382,20 @@
status = "disabled";
};
+ i2c1: i2c@11011000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11011000 0 0x1000>,
+ <0 0x11000480 0 0x80>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C4>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi2: spi@11012000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -320,6 +422,66 @@
status = "disabled";
};
+ i2c9: i2c@11014000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11014000 0 0x1000>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C1_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C1_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@11015000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11015000 0 0x1000>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C2_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C2_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@11016000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11016000 0 0x1000>,
+ <0 0x11000500 0 0x80>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C5>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C5_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@11017000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11017000 0 0x1000>,
+ <0 0x11000580 0 0x80>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C5_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C5_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi4: spi@11018000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -346,6 +508,34 @@
status = "disabled";
};
+ i2c7: i2c@1101a000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1101a000 0 0x1000>,
+ <0 0x11000680 0 0x80>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C7>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@1101b000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1101b000 0 0x1000>,
+ <0 0x11000700 0 0x80>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C8>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
audiosys: syscon@11220000 {
compatible = "mediatek,mt8183-audiosys", "syscon";
reg = <0 0x11220000 0 0x1000>;
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Qii Wang <qii.wang@mediatek.com>
To: wsa@the-dreams.de
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
srv_heupstream@mediatek.com, leilk.liu@mediatek.com,
qii.wang@mediatek.com, xinping.qian@mediatek.com,
liguo.zhang@mediatek.com, robh@kernel.org
Subject: [PATCH v6 6/6] dts: arm64: mt8183: Add I2C nodes
Date: Mon, 11 Mar 2019 13:40:40 +0800 [thread overview]
Message-ID: <1552282840-12778-7-git-send-email-qii.wang@mediatek.com> (raw)
In-Reply-To: <1552282840-12778-1-git-send-email-qii.wang@mediatek.com>
This patch adds nodes for I2C controller.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 190 ++++++++++++++++++++++++++++++
1 file changed, 190 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 165b859..f20f1af 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -16,6 +16,21 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -268,6 +283,79 @@
status = "disabled";
};
+ i2c6: i2c@11005000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11005000 0 0x1000>,
+ <0 0x11000600 0 0x80>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C6>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11007000 0 0x1000>,
+ <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C0>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11008000 {
+ compatible = "mediatek,mt8183-i2c";
+ id = <4>;
+ reg = <0 0x11008000 0 0x1000>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C1>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C1_ARBITER>;
+ clock-names = "main", "dma","arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11009000 0 0x1000>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C2>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C2_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@1100f000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1100f000 0 0x1000>,
+ <0 0x11000400 0 0x80>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C3>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi0: spi@1100a000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -294,6 +382,20 @@
status = "disabled";
};
+ i2c1: i2c@11011000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11011000 0 0x1000>,
+ <0 0x11000480 0 0x80>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C4>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi2: spi@11012000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -320,6 +422,66 @@
status = "disabled";
};
+ i2c9: i2c@11014000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11014000 0 0x1000>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C1_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C1_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@11015000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11015000 0 0x1000>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C2_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C2_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@11016000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11016000 0 0x1000>,
+ <0 0x11000500 0 0x80>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C5>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C5_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@11017000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11017000 0 0x1000>,
+ <0 0x11000580 0 0x80>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C5_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C5_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi4: spi@11018000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -346,6 +508,34 @@
status = "disabled";
};
+ i2c7: i2c@1101a000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1101a000 0 0x1000>,
+ <0 0x11000680 0 0x80>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C7>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@1101b000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1101b000 0 0x1000>,
+ <0 0x11000700 0 0x80>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C8>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
audiosys: syscon@11220000 {
compatible = "mediatek,mt8183-audiosys", "syscon";
reg = <0 0x11220000 0 0x1000>;
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Qii Wang <qii.wang@mediatek.com>
To: <wsa@the-dreams.de>
Cc: devicetree@vger.kernel.org, qii.wang@mediatek.com,
srv_heupstream@mediatek.com, robh@kernel.org,
leilk.liu@mediatek.com, xinping.qian@mediatek.com,
linux-kernel@vger.kernel.org, liguo.zhang@mediatek.com,
linux-mediatek@lists.infradead.org, linux-i2c@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 6/6] dts: arm64: mt8183: Add I2C nodes
Date: Mon, 11 Mar 2019 13:40:40 +0800 [thread overview]
Message-ID: <1552282840-12778-7-git-send-email-qii.wang@mediatek.com> (raw)
In-Reply-To: <1552282840-12778-1-git-send-email-qii.wang@mediatek.com>
This patch adds nodes for I2C controller.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 190 ++++++++++++++++++++++++++++++
1 file changed, 190 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 165b859..f20f1af 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -16,6 +16,21 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -268,6 +283,79 @@
status = "disabled";
};
+ i2c6: i2c@11005000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11005000 0 0x1000>,
+ <0 0x11000600 0 0x80>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C6>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11007000 0 0x1000>,
+ <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C0>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11008000 {
+ compatible = "mediatek,mt8183-i2c";
+ id = <4>;
+ reg = <0 0x11008000 0 0x1000>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C1>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C1_ARBITER>;
+ clock-names = "main", "dma","arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11009000 0 0x1000>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C2>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C2_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@1100f000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1100f000 0 0x1000>,
+ <0 0x11000400 0 0x80>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C3>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi0: spi@1100a000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -294,6 +382,20 @@
status = "disabled";
};
+ i2c1: i2c@11011000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11011000 0 0x1000>,
+ <0 0x11000480 0 0x80>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C4>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi2: spi@11012000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -320,6 +422,66 @@
status = "disabled";
};
+ i2c9: i2c@11014000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11014000 0 0x1000>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C1_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C1_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@11015000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11015000 0 0x1000>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C2_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C2_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@11016000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11016000 0 0x1000>,
+ <0 0x11000500 0 0x80>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C5>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C5_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@11017000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11017000 0 0x1000>,
+ <0 0x11000580 0 0x80>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C5_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C5_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi4: spi@11018000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -346,6 +508,34 @@
status = "disabled";
};
+ i2c7: i2c@1101a000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1101a000 0 0x1000>,
+ <0 0x11000680 0 0x80>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C7>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@1101b000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1101b000 0 0x1000>,
+ <0 0x11000700 0 0x80>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C8>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
audiosys: syscon@11220000 {
compatible = "mediatek,mt8183-audiosys", "syscon";
reg = <0 0x11220000 0 0x1000>;
--
1.7.9.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-11 5:41 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-11 5:40 [PATCH v6 0/6] add i2c support for mt8183 Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 5:40 ` [PATCH v6 1/6] i2c: mediatek: Add offsets array for new i2c registers Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 5:40 ` [PATCH v6 2/6] dt-bindings: i2c: Add Mediatek MT8183 i2c binding Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 5:40 ` [PATCH v6 3/6] i2c: mediatek: Add arb clock in i2c driver Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 8:28 ` Nicolas Boichat
2019-03-11 8:28 ` Nicolas Boichat
2019-03-11 8:28 ` Nicolas Boichat
2019-03-11 5:40 ` [PATCH v6 4/6] i2c: mediatek: Add i2c and apdma sync " Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 5:40 ` [PATCH v6 5/6] i2c: mediatek: Add i2c support for MediaTek MT8183 Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 8:34 ` Nicolas Boichat
2019-03-11 8:34 ` Nicolas Boichat
2019-03-11 8:34 ` Nicolas Boichat
2019-03-11 5:40 ` Qii Wang [this message]
2019-03-11 5:40 ` [PATCH v6 6/6] dts: arm64: mt8183: Add I2C nodes Qii Wang
2019-03-11 5:40 ` Qii Wang
2019-03-11 8:36 ` Nicolas Boichat
2019-03-11 8:36 ` Nicolas Boichat
2019-03-11 8:36 ` Nicolas Boichat
2019-03-11 9:43 ` Qii Wang
2019-03-11 9:43 ` Qii Wang
2019-03-11 9:43 ` Qii Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1552282840-12778-7-git-send-email-qii.wang@mediatek.com \
--to=qii.wang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=leilk.liu@mediatek.com \
--cc=liguo.zhang@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=robh@kernel.org \
--cc=srv_heupstream@mediatek.com \
--cc=wsa@the-dreams.de \
--cc=xinping.qian@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.