All of lore.kernel.org
 help / color / mirror / Atom feed
From: Julien Thierry <julien.thierry@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: mark.rutland@arm.com, Julien Thierry <julien.thierry@arm.com>,
	peterz@infradead.org, Catalin Marinas <catalin.marinas@arm.com>,
	will.deacon@arm.com, acme@kernel.org,
	alexander.shishkin@linux.intel.com, mingo@redhat.com,
	namhyung@kernel.org, jolsa@redhat.com
Subject: [PATCH v2 1/9] arm64: perf: avoid PMXEV* indirection
Date: Fri, 22 Mar 2019 16:23:56 +0000	[thread overview]
Message-ID: <1553271844-49003-2-git-send-email-julien.thierry@arm.com> (raw)
In-Reply-To: <1553271844-49003-1-git-send-email-julien.thierry@arm.com>

From: Mark Rutland <mark.rutland@arm.com>

Currently we access the counter registers and their respective type
registers indirectly. This requires us to write to PMSELR, issue an ISB,
then access the relevant PMXEV* registers.

This is unfortunate, because:

* Under virtualization, accessing one registers requires two traps to
  the hypervisor, even though we could access the register directly with
  a single trap.

* We have to issue an ISB which we could otherwise avoid the cost of.

* When we use NMIs, the NMI handler will have to save/restore the select
  register in case the code it preempted was attempting to access a
  counter or its type register.

We can avoid these issues by directly accessing the relevant registers.
This patch adds helpers to do so.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[Julien T.: Don't inline read/write functions to avoid big code-size
	increase, remove unused read_pmevtypern function.]
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm64/kernel/perf_event.c | 87 +++++++++++++++++++++++++++++++++++-------
 1 file changed, 74 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 4addb38..63d45e2 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -379,6 +379,77 @@ static inline bool armv8pmu_event_is_chained(struct perf_event *event)
 #define	ARMV8_IDX_TO_COUNTER(x)	\
 	(((x) - ARMV8_IDX_COUNTER0) & ARMV8_PMU_COUNTER_MASK)

+/*
+ * This code is really good
+ */
+
+#define PMEVN_CASE(__n, case_macro) \
+	case __n: case_macro(__n); break;
+
+#define PMEVN_SWITCH(__x, case_macro)				\
+	do {							\
+		switch (__x) {					\
+		PMEVN_CASE(0,  case_macro);			\
+		PMEVN_CASE(1,  case_macro);			\
+		PMEVN_CASE(2,  case_macro);			\
+		PMEVN_CASE(3,  case_macro);			\
+		PMEVN_CASE(4,  case_macro);			\
+		PMEVN_CASE(5,  case_macro);			\
+		PMEVN_CASE(6,  case_macro);			\
+		PMEVN_CASE(7,  case_macro);			\
+		PMEVN_CASE(8,  case_macro);			\
+		PMEVN_CASE(9,  case_macro);			\
+		PMEVN_CASE(10, case_macro);			\
+		PMEVN_CASE(11, case_macro);			\
+		PMEVN_CASE(12, case_macro);			\
+		PMEVN_CASE(13, case_macro);			\
+		PMEVN_CASE(14, case_macro);			\
+		PMEVN_CASE(15, case_macro);			\
+		PMEVN_CASE(16, case_macro);			\
+		PMEVN_CASE(17, case_macro);			\
+		PMEVN_CASE(18, case_macro);			\
+		PMEVN_CASE(19, case_macro);			\
+		PMEVN_CASE(21, case_macro);			\
+		PMEVN_CASE(22, case_macro);			\
+		PMEVN_CASE(23, case_macro);			\
+		PMEVN_CASE(24, case_macro);			\
+		PMEVN_CASE(25, case_macro);			\
+		PMEVN_CASE(26, case_macro);			\
+		PMEVN_CASE(27, case_macro);			\
+		PMEVN_CASE(28, case_macro);			\
+		PMEVN_CASE(29, case_macro);			\
+		PMEVN_CASE(30, case_macro);			\
+		default: WARN(1, "Inavlid PMEV* index");	\
+		}						\
+	} while (0)
+
+#define RETURN_READ_PMEVCNTRN(n) \
+	return read_sysreg(pmevcntr##n##_el0);
+static unsigned long read_pmevcntrn(int n)
+{
+	PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN);
+	return 0;
+}
+#undef RETURN_READ_PMEVCNTRN
+
+#define WRITE_PMEVCNTRN(n) \
+	write_sysreg(val, pmevcntr##n##_el0);
+static void write_pmevcntrn(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVCNTRN);
+}
+#undef WRITE_PMEVCNTRN
+
+#define WRITE_PMEVTYPERN(n) \
+	write_sysreg(val, pmevtyper##n##_el0);
+static void write_pmevtypern(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVTYPERN);
+}
+#undef WRITE_PMEVTYPERN
+
+#undef GENERATE_PMEVN_SWITCH
+
 static inline u32 armv8pmu_pmcr_read(void)
 {
 	return read_sysreg(pmcr_el0);
@@ -407,17 +478,9 @@ static inline int armv8pmu_counter_has_overflowed(u32 pmnc, int idx)
 	return pmnc & BIT(ARMV8_IDX_TO_COUNTER(idx));
 }

-static inline void armv8pmu_select_counter(int idx)
-{
-	u32 counter = ARMV8_IDX_TO_COUNTER(idx);
-	write_sysreg(counter, pmselr_el0);
-	isb();
-}
-
 static inline u32 armv8pmu_read_evcntr(int idx)
 {
-	armv8pmu_select_counter(idx);
-	return read_sysreg(pmxevcntr_el0);
+	return read_pmevcntrn(idx);
 }

 static inline u64 armv8pmu_read_hw_counter(struct perf_event *event)
@@ -451,8 +514,7 @@ static inline u64 armv8pmu_read_counter(struct perf_event *event)

 static inline void armv8pmu_write_evcntr(int idx, u32 value)
 {
-	armv8pmu_select_counter(idx);
-	write_sysreg(value, pmxevcntr_el0);
+	write_pmevcntrn(idx, value);
 }

 static inline void armv8pmu_write_hw_counter(struct perf_event *event,
@@ -493,9 +555,8 @@ static inline void armv8pmu_write_counter(struct perf_event *event, u64 value)

 static inline void armv8pmu_write_evtype(int idx, u32 val)
 {
-	armv8pmu_select_counter(idx);
 	val &= ARMV8_PMU_EVTYPE_MASK;
-	write_sysreg(val, pmxevtyper_el0);
+	write_pmevtypern(idx, val);
 }

 static inline void armv8pmu_write_event_type(struct perf_event *event)
--
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-03-22 16:24 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-22 16:23 [PATCH v2 0/9] arm_pmu: Use NMI for perf interrupt Julien Thierry
2019-03-22 16:23 ` Julien Thierry [this message]
2019-03-25 12:36   ` [PATCH v2 1/9] arm64: perf: avoid PMXEV* indirection liwei (GF)
2019-03-25 13:59     ` Julien Thierry
2019-03-25 12:37   ` liwei (GF)
2019-03-25 13:59     ` Julien Thierry
2019-03-26  2:10       ` liwei (GF)
2019-03-28  9:48         ` Julien Thierry
2019-03-25 13:01   ` Marc Gonzalez
2019-07-08 11:40     ` Julien Thierry
2019-03-22 16:23 ` [PATCH v2 2/9] arm64: perf: Remove PMU locking Julien Thierry
2019-03-22 16:23 ` [PATCH v2 3/9] arm: perf: save/resore pmsel Julien Thierry
2019-03-22 16:23 ` [PATCH v2 4/9] arm: perf: Remove Remove PMU locking Julien Thierry
2019-03-22 16:24 ` [PATCH v2 5/9] perf/arm_pmu: Move PMU lock to ARMv6 events Julien Thierry
2019-03-22 16:24 ` [PATCH v2 6/9] arm64: perf: Do not call irq_work_run in NMI context Julien Thierry
2019-03-22 16:24 ` [PATCH v2 7/9] arm/arm64: kvm: pmu: Make overflow handler NMI safe Julien Thierry
2019-03-22 16:24   ` Julien Thierry
2019-03-22 16:24 ` [PATCH v2 8/9] arm_pmu: Introduce pmu_irq_ops Julien Thierry
2019-03-22 16:24 ` [PATCH v2 9/9] arm_pmu: Use NMIs for PMU Julien Thierry
2019-03-22 16:49 ` [PATCH v2 0/9] arm_pmu: Use NMI for perf interrupt Peter Zijlstra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1553271844-49003-2-git-send-email-julien.thierry@arm.com \
    --to=julien.thierry@arm.com \
    --cc=acme@kernel.org \
    --cc=alexander.shishkin@linux.intel.com \
    --cc=catalin.marinas@arm.com \
    --cc=jolsa@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=mingo@redhat.com \
    --cc=namhyung@kernel.org \
    --cc=peterz@infradead.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.