All of lore.kernel.org
 help / color / mirror / Atom feed
From: fabrizio.castro@bp.renesas.com (Fabrizio Castro)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 4.19.y 11/17] arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodes
Date: Wed, 24 Apr 2019 18:20:34 +0100	[thread overview]
Message-ID: <1556126440-27978-12-git-send-email-fabrizio.castro@bp.renesas.com> (raw)
In-Reply-To: <1556126440-27978-1-git-send-email-fabrizio.castro@bp.renesas.com>

commit 19777736ced78c4ea9b171ff758f62e04915f005 upstream.

Add usb dmac and hsusb device nodes on RZ/G2E SoC dtsi.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 45 +++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index aa77094..a4eb5b8 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -637,6 +637,51 @@
 			status = "disabled";
 		};
 
+		hsusb: usb at e6590000 {
+			compatible = "renesas,usbhs-r8a774c0",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller at e65a0000 {
+			compatible = "renesas,r8a774c0-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller at e65b0000 {
+			compatible = "renesas,r8a774c0-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
 		dmac0: dma-controller at e6700000 {
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
-- 
2.7.4

  parent reply	other threads:[~2019-04-24 17:20 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-24 17:20 [cip-dev] [PATCH 4.19.y 00/17] Backport USB support for RZ/G2E Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 01/17] dt-bindings: rcar-gen3-phy-usb2: Add r8a774a1 support Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 02/17] dt-bindings: rcar-gen3-phy-usb2: Add r8a774c0 support Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 03/17] arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodes Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 04/17] usb: renesas_usbhs: add support for RZ/G2E Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 05/17] usb: renesas_usbhs: Add reset_control Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 06/17] usb: renesas_usbhs: Add multiple clocks management Fabrizio Castro
2019-04-25  8:26   ` Pavel Machek
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 07/17] Revert "usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel" Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 08/17] dt-bindings: usb: renesas_usbhs: add clock-names property Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 09/17] dt-bindings: usb: renesas_usbhs: Add r8a774c0 support Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 10/17] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0 Fabrizio Castro
2019-04-24 17:20 ` Fabrizio Castro [this message]
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 12/17] usb: gadget: udc: renesas_usb3: add support for r8a77990 Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 13/17] usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device Fabrizio Castro
2019-04-25  8:40   ` Pavel Machek
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 14/17] usb: gadget: udc: renesas_usb3: add support for r8a774c0 Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 15/17] usb: gadget: udc: renesas_usb3: Add r8a774a1 support Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 16/17] usb: gadget: udc: renesas_usb3: Add bindings for r8a774c0 Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 17/17] arm64: dts: renesas: r8a774c0: Add USB3.0 device nodes Fabrizio Castro
2019-04-25  0:54 ` [cip-dev] [PATCH 4.19.y 00/17] Backport USB support for RZ/G2E nobuhiro1.iwamatsu at toshiba.co.jp
2019-04-25  8:11   ` Pavel Machek
2019-04-25 10:00 ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1556126440-27978-12-git-send-email-fabrizio.castro@bp.renesas.com \
    --to=fabrizio.castro@bp.renesas.com \
    --cc=cip-dev@lists.cip-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.