From: Elliot Berman <eberman@codeaurora.org>
To: bjorn.andersson@linaro.org, saiprakash.ranjan@codeaurora.org,
agross@kernel.org, swboyd@chromium.org
Cc: Elliot Berman <eberman@codeaurora.org>,
tsoni@codeaurora.org, sidgup@codeaurora.org,
psodagud@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 04/18] firmware: qcom_scm: Apply consistent naming scheme to command IDs
Date: Tue, 12 Nov 2019 13:22:40 -0800 [thread overview]
Message-ID: <1573593774-12539-5-git-send-email-eberman@codeaurora.org> (raw)
In-Reply-To: <1573593774-12539-1-git-send-email-eberman@codeaurora.org>
Create a consistent naming scheme for command IDs. The scheme is
QCOM_SCM_##svc_##cmd. Remove unused macros QCOM_SCM_FLAG_HLOS,
QCOM_SCM_FLAG_COLDBOOT_MC, QCOM_SCM_FLAG_WARMBOOT_MC,
QCOM_SCM_CMD_CORE_HOTPLUGGED, and QCOM_SCM_BOOT_ADDR_MC.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
---
drivers/firmware/qcom_scm-32.c | 28 +++++++++++++--------------
drivers/firmware/qcom_scm-64.c | 38 ++++++++++++++++++-------------------
drivers/firmware/qcom_scm.c | 13 +++++--------
drivers/firmware/qcom_scm.h | 43 +++++++++++++++++++-----------------------
4 files changed, 57 insertions(+), 65 deletions(-)
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 5077fcf..fca7279 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -360,7 +360,7 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
set_cpu_present(cpu, false);
}
- return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+ return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_ADDR,
flags, virt_to_phys(entry));
}
@@ -399,7 +399,7 @@ int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
cmd.addr = cpu_to_le32(virt_to_phys(entry));
cmd.flags = cpu_to_le32(flags);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_ADDR,
&cmd, sizeof(cmd), NULL, 0);
if (!ret) {
for_each_cpu(cpu, cpus)
@@ -419,7 +419,7 @@ int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
*/
void __qcom_scm_cpu_power_down(u32 flags)
{
- qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
+ qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_TERMINATE_PC,
flags & QCOM_SCM_FLUSH_FLAG_MASK);
}
@@ -429,7 +429,7 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
__le32 svc_cmd = cpu_to_le32(LEGACY_FUNCNUM(svc_id, cmd_id));
__le32 ret_val = 0;
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_SCM_INFO_IS_CALL_AVAIL,
&svc_cmd, sizeof(svc_cmd), &ret_val,
sizeof(ret_val));
if (ret)
@@ -444,7 +444,7 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
return -ERANGE;
- return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
+ return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_HDCP_INVOKE,
req, req_cnt * sizeof(*req), resp, sizeof(*resp));
}
@@ -460,7 +460,7 @@ bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
in = cpu_to_le32(peripheral);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_IS_SUPPORTED_CMD,
+ QCOM_SCM_PIL_PAS_IS_SUPPORTED,
&in, sizeof(in),
&out, sizeof(out));
@@ -481,7 +481,7 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
request.image_addr = cpu_to_le32(metadata_phys);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_INIT_IMAGE_CMD,
+ QCOM_SCM_PIL_PAS_INIT_IMAGE,
&request, sizeof(request),
&scm_ret, sizeof(scm_ret));
@@ -504,7 +504,7 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
request.len = cpu_to_le32(size);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_MEM_SETUP_CMD,
+ QCOM_SCM_PIL_PAS_MEM_SETUP,
&request, sizeof(request),
&scm_ret, sizeof(scm_ret));
@@ -519,7 +519,7 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
in = cpu_to_le32(peripheral);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
+ QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
&in, sizeof(in),
&out, sizeof(out));
@@ -534,7 +534,7 @@ int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
in = cpu_to_le32(peripheral);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_SHUTDOWN_CMD,
+ QCOM_SCM_PIL_PAS_SHUTDOWN,
&in, sizeof(in),
&out, sizeof(out));
@@ -547,7 +547,7 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
__le32 in = cpu_to_le32(reset);
int ret;
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MSS_RESET,
&in, sizeof(in),
&out, sizeof(out));
@@ -556,8 +556,8 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
{
- return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE,
- enable ? QCOM_SCM_SET_DLOAD_MODE : 0, 0);
+ return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE,
+ enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0, 0);
}
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
@@ -572,7 +572,7 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
req.state = cpu_to_le32(state);
req.id = cpu_to_le32(id);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_REMOTE_STATE,
&req, sizeof(req), &scm_ret, sizeof(scm_ret));
return ret ? : le32_to_cpu(scm_ret);
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index badc245..7de6022 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -256,7 +256,7 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
desc.args[0] = SMCCC_FUNCNUM(svc_id, cmd_id) |
(ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_SCM_INFO_IS_CALL_AVAIL,
&desc, &res);
return ret ? : res.a1;
@@ -284,7 +284,7 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
desc.args[9] = req[4].val;
desc.arginfo = QCOM_SCM_ARGS(10);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_HDCP_INVOKE, &desc,
&res);
*resp = res.a1;
@@ -295,7 +295,7 @@ void __qcom_scm_init(void)
{
u64 cmd;
struct arm_smccc_res res;
- u32 function = SMCCC_FUNCNUM(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);
+ u32 function = SMCCC_FUNCNUM(QCOM_SCM_SVC_INFO, QCOM_SCM_INFO_IS_CALL_AVAIL);
/* First try a SMC64 call */
cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64,
@@ -320,7 +320,7 @@ bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_IS_SUPPORTED_CMD,
+ QCOM_SCM_PIL_PAS_IS_SUPPORTED,
&desc, &res);
return ret ? false : !!res.a1;
@@ -337,7 +337,7 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
desc.args[1] = metadata_phys;
desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_INIT_IMAGE,
&desc, &res);
return ret ? : res.a1;
@@ -355,7 +355,7 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
desc.args[2] = size;
desc.arginfo = QCOM_SCM_ARGS(3);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MEM_SETUP,
&desc, &res);
return ret ? : res.a1;
@@ -371,7 +371,7 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
+ QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
&desc, &res);
return ret ? : res.a1;
@@ -386,7 +386,7 @@ int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_SHUTDOWN,
&desc, &res);
return ret ? : res.a1;
@@ -402,7 +402,7 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
desc.args[1] = 0;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MSS_RESET, &desc,
&res);
return ret ? : res.a1;
@@ -418,7 +418,7 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
desc.args[1] = id;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_REMOTE_STATE,
&desc, &res);
return ret ? : res.a1;
@@ -445,7 +445,7 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
QCOM_SCM_VAL, QCOM_SCM_VAL);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_MEM_PROT_ASSIGN_ID,
+ QCOM_SCM_MP_ASSIGN,
&desc, &res);
return ret ? : res.a1;
@@ -461,7 +461,7 @@ int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
desc.args[1] = spare;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_MP_RESTORE_SEC_CFG,
&desc, &res);
return ret ? : res.a1;
@@ -478,7 +478,7 @@ int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_SCM_IOMMU_SECURE_PTBL_SIZE, &desc, &res);
+ QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE, &desc, &res);
if (size)
*size = res.a1;
@@ -500,7 +500,7 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
QCOM_SCM_VAL);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_SCM_IOMMU_SECURE_PTBL_INIT, &desc, &res);
+ QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT, &desc, &res);
/* the pg table has been initialized already, ignore the error */
if (ret == -EPERM)
@@ -514,11 +514,11 @@ int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
- desc.args[0] = QCOM_SCM_SET_DLOAD_MODE;
- desc.args[1] = enable ? QCOM_SCM_SET_DLOAD_MODE : 0;
+ desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
+ desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
desc.arginfo = QCOM_SCM_ARGS(2);
- return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE,
+ return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE,
&desc, &res);
}
@@ -558,10 +558,10 @@ int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en)
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
- desc.args[0] = QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL;
+ desc.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL;
desc.args[1] = en;
desc.arginfo = QCOM_SCM_ARGS(2);
return qcom_scm_call_atomic(dev, QCOM_SCM_SVC_SMMU_PROGRAM,
- QCOM_SCM_CONFIG_ERRATA1, &desc, &res);
+ QCOM_SCM_SMMU_CONFIG_ERRATA1, &desc, &res);
}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index a729e05..72757c5 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1,8 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Qualcomm SCM driver
- *
- * Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010,2015,2019 The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*/
#include <linux/platform_device.h>
@@ -142,7 +139,7 @@ bool qcom_scm_hdcp_available(void)
return ret;
ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
- QCOM_SCM_CMD_HDCP);
+ QCOM_SCM_HDCP_INVOKE);
qcom_scm_clk_disable();
@@ -183,7 +180,7 @@ bool qcom_scm_pas_supported(u32 peripheral)
int ret;
ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_IS_SUPPORTED_CMD);
+ QCOM_SCM_PIL_PAS_IS_SUPPORTED);
if (ret <= 0)
return false;
@@ -370,12 +367,12 @@ static void qcom_scm_set_download_mode(bool enable)
avail = __qcom_scm_is_call_available(__scm->dev,
QCOM_SCM_SVC_BOOT,
- QCOM_SCM_SET_DLOAD_MODE);
+ QCOM_SCM_BOOT_SET_DLOAD_MODE);
if (avail) {
ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
} else if (__scm->dload_mode_addr) {
ret = __qcom_scm_io_writel(__scm->dev, __scm->dload_mode_addr,
- enable ? QCOM_SCM_SET_DLOAD_MODE : 0);
+ enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
} else {
dev_err(__scm->dev,
"No available mechanism for setting download mode\n");
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index baee744..dfb5db2 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -1,27 +1,22 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015,2019 The Linux Foundation. All rights reserved.
*/
#ifndef __QCOM_SCM_INT_H
#define __QCOM_SCM_INT_H
#define QCOM_SCM_SVC_BOOT 0x1
-#define QCOM_SCM_BOOT_ADDR 0x1
-#define QCOM_SCM_SET_DLOAD_MODE 0x10
-#define QCOM_SCM_BOOT_ADDR_MC 0x11
-#define QCOM_SCM_SET_REMOTE_STATE 0xa
+#define QCOM_SCM_BOOT_SET_ADDR 0x1
+#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
+#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0xa
extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
-#define QCOM_SCM_FLAG_HLOS 0x01
-#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
-#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
const cpumask_t *cpus);
extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
-#define QCOM_SCM_CMD_TERMINATE_PC 0x2
+#define QCOM_SCM_BOOT_TERMINATE_PC 0x2
#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
-#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10
extern void __qcom_scm_cpu_power_down(u32 flags);
#define QCOM_SCM_SVC_IO 0x5
@@ -31,24 +26,24 @@ extern int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr, unsigned in
extern int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val);
#define QCOM_SCM_SVC_INFO 0x6
-#define QCOM_IS_CALL_AVAIL_CMD 0x1
+#define QCOM_SCM_INFO_IS_CALL_AVAIL 0x1
extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
u32 cmd_id);
#define QCOM_SCM_SVC_HDCP 0x11
-#define QCOM_SCM_CMD_HDCP 0x01
+#define QCOM_SCM_HDCP_INVOKE 0x01
extern int __qcom_scm_hdcp_req(struct device *dev,
struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
extern void __qcom_scm_init(void);
#define QCOM_SCM_SVC_PIL 0x2
-#define QCOM_SCM_PAS_INIT_IMAGE_CMD 0x1
-#define QCOM_SCM_PAS_MEM_SETUP_CMD 0x2
-#define QCOM_SCM_PAS_AUTH_AND_RESET_CMD 0x5
-#define QCOM_SCM_PAS_SHUTDOWN_CMD 0x6
-#define QCOM_SCM_PAS_IS_SUPPORTED_CMD 0x7
-#define QCOM_SCM_PAS_MSS_RESET 0xa
+#define QCOM_SCM_PIL_PAS_INIT_IMAGE 0x1
+#define QCOM_SCM_PIL_PAS_MEM_SETUP 0x2
+#define QCOM_SCM_PIL_PAS_AUTH_AND_RESET 0x5
+#define QCOM_SCM_PIL_PAS_SHUTDOWN 0x6
+#define QCOM_SCM_PIL_PAS_IS_SUPPORTED 0x7
+#define QCOM_SCM_PIL_PAS_MSS_RESET 0xa
extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
dma_addr_t metadata_phys);
@@ -86,21 +81,21 @@ static inline int qcom_scm_remap_error(int err)
}
#define QCOM_SCM_SVC_MP 0xc
-#define QCOM_SCM_RESTORE_SEC_CFG 2
+#define QCOM_SCM_MP_RESTORE_SEC_CFG 2
extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
u32 spare);
-#define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE 3
-#define QCOM_SCM_IOMMU_SECURE_PTBL_INIT 4
+#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE 3
+#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT 4
#define QCOM_SCM_SVC_SMMU_PROGRAM 0x15
-#define QCOM_SCM_CONFIG_ERRATA1 0x3
-#define QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL 0x2
+#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x3
+#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x2
extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
size_t *size);
extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
u32 size, u32 spare);
extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev,
bool enable);
-#define QCOM_MEM_PROT_ASSIGN_ID 0x16
+#define QCOM_SCM_MP_ASSIGN 0x16
extern int __qcom_scm_assign_mem(struct device *dev,
phys_addr_t mem_region, size_t mem_sz,
phys_addr_t src, size_t src_sz,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-11-12 21:24 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-12 21:22 [PATCH v2 00/18] Restructure, improve target support for qcom_scm driver Elliot Berman
2019-11-12 21:22 ` [PATCH v2 01/18] firmware: qcom_scm: Rename macros and structures Elliot Berman
2019-11-15 23:27 ` Stephen Boyd
2019-11-16 1:19 ` eberman
2019-11-19 21:47 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 02/18] firmware: qcom_scm: Add funcnum IDs Elliot Berman
2019-11-15 23:30 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 03/18] firmware: qcom_scm-64: Make SMCCC macros less magical Elliot Berman
2019-11-15 22:43 ` Stephen Boyd
2019-11-12 21:22 ` Elliot Berman [this message]
2019-11-15 22:45 ` [PATCH v2 04/18] firmware: qcom_scm: Apply consistent naming scheme to command IDs Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 05/18] firmware: qcom_scm: Remove unused qcom_scm_get_version Elliot Berman
2019-11-15 22:45 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 06/18] firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc Elliot Berman
2019-11-15 23:40 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 07/18] firmware: qcom_scm-64: Add SCM results to descriptor Elliot Berman
2019-11-15 23:42 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 08/18] firmware: qcom_scm-64: Remove qcom_scm_call_do_smccc Elliot Berman
2019-11-15 23:45 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 09/18] firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc Elliot Berman
2019-11-15 23:57 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 10/18] firmware: qcom_scm-64: Improve SMC convention detection Elliot Berman
2019-11-16 0:21 ` Stephen Boyd
2019-11-16 1:29 ` eberman
2019-11-19 21:49 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 11/18] firmware: qcom_scm-32: Use SMC arch wrappers Elliot Berman
2019-11-16 0:41 ` Stephen Boyd
2019-12-12 19:45 ` Elliot Berman
2019-11-12 21:22 ` [PATCH v2 12/18] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls Elliot Berman
2019-11-19 22:03 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 13/18] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call Elliot Berman
2019-11-19 22:05 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 14/18] firmware: qcom_scm-32: Create common legacy atomic call Elliot Berman
2019-11-19 22:11 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 15/18] firmware: qcom_scm-32: Add device argument to atomic calls Elliot Berman
2019-11-19 22:13 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 16/18] firmware: qcom_scm: Remove thin wrappers Elliot Berman
2019-11-12 21:22 ` [PATCH v2 17/18] firmware: qcom_scm: Dynamically support SMCCC and legacy conventions Elliot Berman
2019-11-12 21:22 ` [PATCH v2 18/18] firmware: qcom_scm: Order functions, definitions by service/command Elliot Berman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1573593774-12539-5-git-send-email-eberman@codeaurora.org \
--to=eberman@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=psodagud@codeaurora.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sidgup@codeaurora.org \
--cc=swboyd@chromium.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.