From: Akinobu Mita <akinobu.mita@gmail.com> To: linux-nvme@lists.infradead.org, linux-hwmon@vger.kernel.org Cc: Akinobu Mita <akinobu.mita@gmail.com>, Keith Busch <kbusch@kernel.org>, Jens Axboe <axboe@fb.com>, Christoph Hellwig <hch@lst.de>, Sagi Grimberg <sagi@grimberg.me>, Jean Delvare <jdelvare@suse.com>, Guenter Roeck <linux@roeck-us.net> Subject: [PATCH v2 1/2] nvme: hwmon: provide temperature min and max values for each sensor Date: Fri, 15 Nov 2019 00:40:00 +0900 [thread overview] Message-ID: <1573746001-20979-2-git-send-email-akinobu.mita@gmail.com> (raw) In-Reply-To: <1573746001-20979-1-git-send-email-akinobu.mita@gmail.com> According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in nvme-hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> --- drivers/nvme/host/nvme-hwmon.c | 106 ++++++++++++++++++++++++++++++++++------- include/linux/nvme.h | 6 +++ 2 files changed, 96 insertions(+), 16 deletions(-) diff --git a/drivers/nvme/host/nvme-hwmon.c b/drivers/nvme/host/nvme-hwmon.c index 5480cbb..97a84b4 100644 --- a/drivers/nvme/host/nvme-hwmon.c +++ b/drivers/nvme/host/nvme-hwmon.c @@ -9,12 +9,57 @@ #include "nvme.h" +/* These macros should be moved to linux/temperature.h */ +#define MILLICELSIUS_TO_KELVIN(t) DIV_ROUND_CLOSEST((t) + 273150, 1000) +#define KELVIN_TO_MILLICELSIUS(t) ((t) * 1000L - 273150) + struct nvme_hwmon_data { struct nvme_ctrl *ctrl; struct nvme_smart_log log; struct mutex read_lock; }; +static int nvme_get_temp_thresh(struct nvme_ctrl *ctrl, int sensor, bool under, + long *temp) +{ + unsigned int threshold = sensor << NVME_TEMP_THRESH_SELECT_SHIFT; + u32 status; + int ret; + + if (under) + threshold |= NVME_TEMP_THRESH_TYPE_UNDER; + + ret = nvme_get_features(ctrl, NVME_FEAT_TEMP_THRESH, threshold, NULL, 0, + &status); + if (ret > 0) + return -EIO; + if (ret < 0) + return ret; + *temp = KELVIN_TO_MILLICELSIUS(status & NVME_TEMP_THRESH_MASK); + + return 0; +} + +static int nvme_set_temp_thresh(struct nvme_ctrl *ctrl, int sensor, bool under, + long temp) +{ + unsigned int threshold = sensor << NVME_TEMP_THRESH_SELECT_SHIFT; + int ret; + + temp = MILLICELSIUS_TO_KELVIN(temp); + threshold |= clamp_val(temp, 0, NVME_TEMP_THRESH_MASK); + + if (under) + threshold |= NVME_TEMP_THRESH_TYPE_UNDER; + + ret = nvme_set_features(ctrl, NVME_FEAT_TEMP_THRESH, threshold, NULL, 0, + NULL); + if (ret > 0) + return -EIO; + + return ret; +} + static int nvme_hwmon_get_smart_log(struct nvme_hwmon_data *data) { int ret; @@ -39,10 +84,11 @@ static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type, */ switch (attr) { case hwmon_temp_max: - *val = (data->ctrl->wctemp - 273) * 1000; - return 0; + return nvme_get_temp_thresh(data->ctrl, channel, false, val); + case hwmon_temp_min: + return nvme_get_temp_thresh(data->ctrl, channel, true, val); case hwmon_temp_crit: - *val = (data->ctrl->cctemp - 273) * 1000; + *val = KELVIN_TO_MILLICELSIUS(data->ctrl->cctemp); return 0; default: break; @@ -59,7 +105,7 @@ static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type, temp = get_unaligned_le16(log->temperature); else temp = le16_to_cpu(log->temp_sensor[channel - 1]); - *val = (temp - 273) * 1000; + *val = KELVIN_TO_MILLICELSIUS(temp); break; case hwmon_temp_alarm: *val = !!(log->critical_warning & NVME_SMART_CRIT_TEMPERATURE); @@ -73,6 +119,23 @@ static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type, return err; } +static int nvme_hwmon_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct nvme_hwmon_data *data = dev_get_drvdata(dev); + + switch (attr) { + case hwmon_temp_max: + return nvme_set_temp_thresh(data->ctrl, channel, false, val); + case hwmon_temp_min: + return nvme_set_temp_thresh(data->ctrl, channel, true, val); + default: + break; + } + + return -EOPNOTSUPP; +} + static const char * const nvme_hwmon_sensor_names[] = { "Composite", "Sensor 1", @@ -105,8 +168,10 @@ static umode_t nvme_hwmon_is_visible(const void *_data, return 0444; break; case hwmon_temp_max: - if (!channel && data->ctrl->wctemp) - return 0444; + case hwmon_temp_min: + if ((!channel && data->ctrl->wctemp) || + (channel && data->log.temp_sensor[channel - 1])) + return 0644; break; case hwmon_temp_alarm: if (!channel) @@ -126,16 +191,24 @@ static umode_t nvme_hwmon_is_visible(const void *_data, static const struct hwmon_channel_info *nvme_hwmon_info[] = { HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), HWMON_CHANNEL_INFO(temp, - HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | - HWMON_T_LABEL | HWMON_T_ALARM, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL), + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_CRIT | HWMON_T_LABEL | HWMON_T_ALARM, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL), NULL }; @@ -143,6 +216,7 @@ static const struct hwmon_ops nvme_hwmon_ops = { .is_visible = nvme_hwmon_is_visible, .read = nvme_hwmon_read, .read_string = nvme_hwmon_read_string, + .write = nvme_hwmon_write, }; static const struct hwmon_chip_info nvme_hwmon_chip_info = { diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 269b2e8..347a44f 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -803,6 +803,12 @@ struct nvme_write_zeroes_cmd { /* Features */ +enum { + NVME_TEMP_THRESH_MASK = 0xffff, + NVME_TEMP_THRESH_SELECT_SHIFT = 16, + NVME_TEMP_THRESH_TYPE_UNDER = 0x100000, +}; + struct nvme_feat_auto_pst { __le64 entries[32]; }; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Akinobu Mita <akinobu.mita@gmail.com> To: linux-nvme@lists.infradead.org, linux-hwmon@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.com>, Sagi Grimberg <sagi@grimberg.me>, Akinobu Mita <akinobu.mita@gmail.com>, Jens Axboe <axboe@fb.com>, Keith Busch <kbusch@kernel.org>, Christoph Hellwig <hch@lst.de>, Guenter Roeck <linux@roeck-us.net> Subject: [PATCH v2 1/2] nvme: hwmon: provide temperature min and max values for each sensor Date: Fri, 15 Nov 2019 00:40:00 +0900 [thread overview] Message-ID: <1573746001-20979-2-git-send-email-akinobu.mita@gmail.com> (raw) In-Reply-To: <1573746001-20979-1-git-send-email-akinobu.mita@gmail.com> According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in nvme-hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> --- drivers/nvme/host/nvme-hwmon.c | 106 ++++++++++++++++++++++++++++++++++------- include/linux/nvme.h | 6 +++ 2 files changed, 96 insertions(+), 16 deletions(-) diff --git a/drivers/nvme/host/nvme-hwmon.c b/drivers/nvme/host/nvme-hwmon.c index 5480cbb..97a84b4 100644 --- a/drivers/nvme/host/nvme-hwmon.c +++ b/drivers/nvme/host/nvme-hwmon.c @@ -9,12 +9,57 @@ #include "nvme.h" +/* These macros should be moved to linux/temperature.h */ +#define MILLICELSIUS_TO_KELVIN(t) DIV_ROUND_CLOSEST((t) + 273150, 1000) +#define KELVIN_TO_MILLICELSIUS(t) ((t) * 1000L - 273150) + struct nvme_hwmon_data { struct nvme_ctrl *ctrl; struct nvme_smart_log log; struct mutex read_lock; }; +static int nvme_get_temp_thresh(struct nvme_ctrl *ctrl, int sensor, bool under, + long *temp) +{ + unsigned int threshold = sensor << NVME_TEMP_THRESH_SELECT_SHIFT; + u32 status; + int ret; + + if (under) + threshold |= NVME_TEMP_THRESH_TYPE_UNDER; + + ret = nvme_get_features(ctrl, NVME_FEAT_TEMP_THRESH, threshold, NULL, 0, + &status); + if (ret > 0) + return -EIO; + if (ret < 0) + return ret; + *temp = KELVIN_TO_MILLICELSIUS(status & NVME_TEMP_THRESH_MASK); + + return 0; +} + +static int nvme_set_temp_thresh(struct nvme_ctrl *ctrl, int sensor, bool under, + long temp) +{ + unsigned int threshold = sensor << NVME_TEMP_THRESH_SELECT_SHIFT; + int ret; + + temp = MILLICELSIUS_TO_KELVIN(temp); + threshold |= clamp_val(temp, 0, NVME_TEMP_THRESH_MASK); + + if (under) + threshold |= NVME_TEMP_THRESH_TYPE_UNDER; + + ret = nvme_set_features(ctrl, NVME_FEAT_TEMP_THRESH, threshold, NULL, 0, + NULL); + if (ret > 0) + return -EIO; + + return ret; +} + static int nvme_hwmon_get_smart_log(struct nvme_hwmon_data *data) { int ret; @@ -39,10 +84,11 @@ static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type, */ switch (attr) { case hwmon_temp_max: - *val = (data->ctrl->wctemp - 273) * 1000; - return 0; + return nvme_get_temp_thresh(data->ctrl, channel, false, val); + case hwmon_temp_min: + return nvme_get_temp_thresh(data->ctrl, channel, true, val); case hwmon_temp_crit: - *val = (data->ctrl->cctemp - 273) * 1000; + *val = KELVIN_TO_MILLICELSIUS(data->ctrl->cctemp); return 0; default: break; @@ -59,7 +105,7 @@ static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type, temp = get_unaligned_le16(log->temperature); else temp = le16_to_cpu(log->temp_sensor[channel - 1]); - *val = (temp - 273) * 1000; + *val = KELVIN_TO_MILLICELSIUS(temp); break; case hwmon_temp_alarm: *val = !!(log->critical_warning & NVME_SMART_CRIT_TEMPERATURE); @@ -73,6 +119,23 @@ static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type, return err; } +static int nvme_hwmon_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct nvme_hwmon_data *data = dev_get_drvdata(dev); + + switch (attr) { + case hwmon_temp_max: + return nvme_set_temp_thresh(data->ctrl, channel, false, val); + case hwmon_temp_min: + return nvme_set_temp_thresh(data->ctrl, channel, true, val); + default: + break; + } + + return -EOPNOTSUPP; +} + static const char * const nvme_hwmon_sensor_names[] = { "Composite", "Sensor 1", @@ -105,8 +168,10 @@ static umode_t nvme_hwmon_is_visible(const void *_data, return 0444; break; case hwmon_temp_max: - if (!channel && data->ctrl->wctemp) - return 0444; + case hwmon_temp_min: + if ((!channel && data->ctrl->wctemp) || + (channel && data->log.temp_sensor[channel - 1])) + return 0644; break; case hwmon_temp_alarm: if (!channel) @@ -126,16 +191,24 @@ static umode_t nvme_hwmon_is_visible(const void *_data, static const struct hwmon_channel_info *nvme_hwmon_info[] = { HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), HWMON_CHANNEL_INFO(temp, - HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | - HWMON_T_LABEL | HWMON_T_ALARM, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL, - HWMON_T_INPUT | HWMON_T_LABEL), + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_CRIT | HWMON_T_LABEL | HWMON_T_ALARM, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_LABEL), NULL }; @@ -143,6 +216,7 @@ static const struct hwmon_ops nvme_hwmon_ops = { .is_visible = nvme_hwmon_is_visible, .read = nvme_hwmon_read, .read_string = nvme_hwmon_read_string, + .write = nvme_hwmon_write, }; static const struct hwmon_chip_info nvme_hwmon_chip_info = { diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 269b2e8..347a44f 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -803,6 +803,12 @@ struct nvme_write_zeroes_cmd { /* Features */ +enum { + NVME_TEMP_THRESH_MASK = 0xffff, + NVME_TEMP_THRESH_SELECT_SHIFT = 16, + NVME_TEMP_THRESH_TYPE_UNDER = 0x100000, +}; + struct nvme_feat_auto_pst { __le64 entries[32]; }; -- 2.7.4 _______________________________________________ Linux-nvme mailing list Linux-nvme@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-nvme
next prev parent reply other threads:[~2019-11-14 15:40 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-14 15:39 [PATCH v2 0/2] nvme: hwmon: provide temperature threshold features Akinobu Mita 2019-11-14 15:39 ` Akinobu Mita 2019-11-14 15:40 ` Akinobu Mita [this message] 2019-11-14 15:40 ` [PATCH v2 1/2] nvme: hwmon: provide temperature min and max values for each sensor Akinobu Mita 2019-11-14 19:06 ` Guenter Roeck 2019-11-14 19:06 ` Guenter Roeck 2019-11-20 18:48 ` Christoph Hellwig 2019-11-20 18:48 ` Christoph Hellwig 2019-11-21 13:48 ` Akinobu Mita 2019-11-21 13:48 ` Akinobu Mita 2019-11-21 14:27 ` Guenter Roeck 2019-11-21 14:27 ` Guenter Roeck 2019-11-21 15:15 ` Keith Busch 2019-11-21 15:15 ` Keith Busch 2019-11-14 15:40 ` [PATCH v2 2/2] nvme: hwmon: add quirk to avoid changing temperature threshold Akinobu Mita 2019-11-14 15:40 ` Akinobu Mita 2019-11-14 19:14 ` Guenter Roeck 2019-11-14 19:14 ` Guenter Roeck 2019-11-20 18:48 ` Christoph Hellwig 2019-11-20 18:48 ` Christoph Hellwig
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1573746001-20979-2-git-send-email-akinobu.mita@gmail.com \ --to=akinobu.mita@gmail.com \ --cc=axboe@fb.com \ --cc=hch@lst.de \ --cc=jdelvare@suse.com \ --cc=kbusch@kernel.org \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux-nvme@lists.infradead.org \ --cc=linux@roeck-us.net \ --cc=sagi@grimberg.me \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.