All of lore.kernel.org
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <sam@ravnborg.org>, <bbrezillon@kernel.org>, <airlied@linux.ie>,
	<daniel@ffwll.ch>, <nicolas.ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <lee.jones@linaro.org>
Cc: <dri-devel@lists.freedesktop.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH 0/5] fixes for atmel-hlcdc
Date: Tue, 10 Dec 2019 15:24:42 +0200	[thread overview]
Message-ID: <1575984287-26787-1-git-send-email-claudiu.beznea@microchip.com> (raw)

Hi,

I have few fixes for atmel-hlcdc driver in this series as well
as two reverts.
Revert "drm: atmel-hlcdc: enable sys_clk during initalization." is
due to the fix in in patch 2/5.

Thank you,
Claudiu Beznea

Claudiu Beznea (5):
  drm: atmel-hlcdc: use double rate for pixel clock only if supported
  drm: atmel-hlcdc: enable clock before configuring timing engine
  mfd: atmel-hlcdc: return in case of error
  Revert "drm/atmel-hlcdc: allow selecting a higher pixel-clock than
    requested"
  Revert "drm: atmel-hlcdc: enable sys_clk during initalization."

 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 26 ++++++++++----------------
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c   | 19 +------------------
 drivers/mfd/atmel-hlcdc.c                      | 14 ++++++++++----
 3 files changed, 21 insertions(+), 38 deletions(-)

-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <sam@ravnborg.org>, <bbrezillon@kernel.org>, <airlied@linux.ie>,
	<daniel@ffwll.ch>, <nicolas.ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <lee.jones@linaro.org>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>,
	linux-arm-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH 0/5] fixes for atmel-hlcdc
Date: Tue, 10 Dec 2019 15:24:42 +0200	[thread overview]
Message-ID: <1575984287-26787-1-git-send-email-claudiu.beznea@microchip.com> (raw)

Hi,

I have few fixes for atmel-hlcdc driver in this series as well
as two reverts.
Revert "drm: atmel-hlcdc: enable sys_clk during initalization." is
due to the fix in in patch 2/5.

Thank you,
Claudiu Beznea

Claudiu Beznea (5):
  drm: atmel-hlcdc: use double rate for pixel clock only if supported
  drm: atmel-hlcdc: enable clock before configuring timing engine
  mfd: atmel-hlcdc: return in case of error
  Revert "drm/atmel-hlcdc: allow selecting a higher pixel-clock than
    requested"
  Revert "drm: atmel-hlcdc: enable sys_clk during initalization."

 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 26 ++++++++++----------------
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c   | 19 +------------------
 drivers/mfd/atmel-hlcdc.c                      | 14 ++++++++++----
 3 files changed, 21 insertions(+), 38 deletions(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <sam@ravnborg.org>, <bbrezillon@kernel.org>, <airlied@linux.ie>,
	<daniel@ffwll.ch>, <nicolas.ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <lee.jones@linaro.org>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>,
	linux-arm-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH 0/5] fixes for atmel-hlcdc
Date: Tue, 10 Dec 2019 15:24:42 +0200	[thread overview]
Message-ID: <1575984287-26787-1-git-send-email-claudiu.beznea@microchip.com> (raw)

Hi,

I have few fixes for atmel-hlcdc driver in this series as well
as two reverts.
Revert "drm: atmel-hlcdc: enable sys_clk during initalization." is
due to the fix in in patch 2/5.

Thank you,
Claudiu Beznea

Claudiu Beznea (5):
  drm: atmel-hlcdc: use double rate for pixel clock only if supported
  drm: atmel-hlcdc: enable clock before configuring timing engine
  mfd: atmel-hlcdc: return in case of error
  Revert "drm/atmel-hlcdc: allow selecting a higher pixel-clock than
    requested"
  Revert "drm: atmel-hlcdc: enable sys_clk during initalization."

 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 26 ++++++++++----------------
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c   | 19 +------------------
 drivers/mfd/atmel-hlcdc.c                      | 14 ++++++++++----
 3 files changed, 21 insertions(+), 38 deletions(-)

-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2019-12-10 13:24 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-10 13:24 Claudiu Beznea [this message]
2019-12-10 13:24 ` [PATCH 0/5] fixes for atmel-hlcdc Claudiu Beznea
2019-12-10 13:24 ` Claudiu Beznea
2019-12-10 13:24 ` [PATCH 1/5] drm: atmel-hlcdc: use double rate for pixel clock only if supported Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24 ` [PATCH 2/5] drm: atmel-hlcdc: enable clock before configuring timing engine Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 20:18   ` Sam Ravnborg
2019-12-10 20:18     ` Sam Ravnborg
2019-12-10 20:18     ` Sam Ravnborg
2019-12-10 13:24 ` [PATCH 3/5] mfd: atmel-hlcdc: return in case of error Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 20:37   ` Sam Ravnborg
2019-12-10 20:37     ` Sam Ravnborg
2019-12-10 20:37     ` Sam Ravnborg
2019-12-11 12:07     ` Claudiu.Beznea
2019-12-11 12:07       ` Claudiu.Beznea
2019-12-11 12:07       ` Claudiu.Beznea
2019-12-10 13:24 ` [PATCH 4/5] Revert "drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested" Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 14:11   ` Peter Rosin
2019-12-10 14:11     ` Peter Rosin
2019-12-10 14:11     ` Peter Rosin
2019-12-10 14:59     ` Claudiu.Beznea
2019-12-10 14:59       ` Claudiu.Beznea
2019-12-10 14:59       ` Claudiu.Beznea
2019-12-10 17:22       ` Peter Rosin
2019-12-10 17:22         ` Peter Rosin
2019-12-10 17:22         ` Peter Rosin
2019-12-11 11:45         ` Claudiu.Beznea
2019-12-11 11:45           ` Claudiu.Beznea
2019-12-11 11:45           ` Claudiu.Beznea
2019-12-11 13:28           ` Peter Rosin
2019-12-11 13:28             ` Peter Rosin
2019-12-11 13:28             ` Peter Rosin
2019-12-13  9:28             ` Claudiu.Beznea
2019-12-13  9:28               ` Claudiu.Beznea
2019-12-13  9:28               ` Claudiu.Beznea
2019-12-13  9:30               ` Peter Rosin
2019-12-13  9:30                 ` Peter Rosin
2019-12-13  9:30                 ` Peter Rosin
2019-12-10 13:24 ` [PATCH 5/5] Revert "drm: atmel-hlcdc: enable sys_clk during initalization." Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 20:34   ` Sam Ravnborg
2019-12-10 20:34     ` Sam Ravnborg
2019-12-10 20:34     ` Sam Ravnborg
2019-12-11 11:55     ` Claudiu.Beznea
2019-12-11 11:55       ` Claudiu.Beznea
2019-12-11 11:55       ` Claudiu.Beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1575984287-26787-1-git-send-email-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=airlied@linux.ie \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bbrezillon@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.