All of lore.kernel.org
 help / color / mirror / Atom feed
From: Don Brace <don.brace@pmcs.com>
To: scott.teel@pmcs.com, Kevin.Barnett@pmcs.com,
	james.bottomley@parallels.com, hch@infradead.org,
	Justin.Lindley@pmcs.com, brace@pmcs.com
Cc: linux-scsi@vger.kernel.org
Subject: [PATCH v3 17/42] hpsa: clean up error handling
Date: Tue, 17 Mar 2015 15:03:57 -0500	[thread overview]
Message-ID: <20150317200357.19856.32749.stgit@brunhilda> (raw)
In-Reply-To: <20150317200139.19856.87982.stgit@brunhilda>

From: Robert Elliott <elliott@hp.com>

refactor error cleanup and shutdown
disable interrupts and pci_disable_device on critical failures
add hpsa_free_cfgtables function

Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
 drivers/scsi/hpsa.c |   92 ++++++++++++++++++++++++++++++++-------------------
 1 file changed, 58 insertions(+), 34 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index c98c591..3559425a4 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -6546,6 +6546,17 @@ static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
 	return 0;
 }
 
+static void hpsa_free_cfgtables(struct ctlr_info *h)
+{
+	if (h->transtable)
+		iounmap(h->transtable);
+	if (h->cfgtable)
+		iounmap(h->cfgtable);
+}
+
+/* Find and map CISS config table and transfer table
++ * several items must be unmapped (freed) later
++ * */
 static int hpsa_find_cfgtables(struct ctlr_info *h)
 {
 	u64 cfg_offset;
@@ -6572,8 +6583,11 @@ static int hpsa_find_cfgtables(struct ctlr_info *h)
 	h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
 				cfg_base_addr_index)+cfg_offset+trans_offset,
 				sizeof(*h->transtable));
-	if (!h->transtable)
+	if (!h->transtable) {
+		dev_err(&h->pdev->dev, "Failed mapping transfer table\n");
+		hpsa_free_cfgtables(h);
 		return -ENOMEM;
+	}
 	return 0;
 }
 
@@ -6749,6 +6763,17 @@ error:
 	return -ENODEV;
 }
 
+/* free items allocated or mapped by hpsa_pci_init */
+static void hpsa_free_pci_init(struct ctlr_info *h)
+{
+	hpsa_free_cfgtables(h);			/* pci_init 4 */
+	iounmap(h->vaddr);			/* pci_init 3 */
+	hpsa_disable_interrupt_mode(h);		/* pci_init 2 */
+	pci_release_regions(h->pdev);		/* pci_init 2 */
+	pci_disable_device(h->pdev);		/* pci_init 1 */
+}
+
+/* several items must be freed later */
 static int hpsa_pci_init(struct ctlr_info *h)
 {
 	int prod_index, err;
@@ -6767,15 +6792,15 @@ static int hpsa_pci_init(struct ctlr_info *h)
 
 	err = pci_enable_device(h->pdev);
 	if (err) {
-		dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
+		dev_err(&h->pdev->dev, "failed to enable PCI device\n");
 		return err;
 	}
 
 	err = pci_request_regions(h->pdev, HPSA);
 	if (err) {
 		dev_err(&h->pdev->dev,
-			"cannot obtain PCI resources, aborting\n");
-		return err;
+			"failed to obtain PCI resources\n");
+		goto clean1;	/* pci */
 	}
 
 	pci_set_master(h->pdev);
@@ -6783,40 +6808,41 @@ static int hpsa_pci_init(struct ctlr_info *h)
 	hpsa_interrupt_mode(h);
 	err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
 	if (err)
-		goto err_out_free_res;
+		goto clean2;	/* intmode+region, pci */
 	h->vaddr = remap_pci_mem(h->paddr, 0x250);
 	if (!h->vaddr) {
+		dev_err(&h->pdev->dev, "failed to remap PCI mem\n");
 		err = -ENOMEM;
-		goto err_out_free_res;
+		goto clean2;	/* intmode+region, pci */
 	}
 	err = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
 	if (err)
-		goto err_out_free_res;
+		goto clean3;	/* vaddr, intmode+region, pci */
 	err = hpsa_find_cfgtables(h);
 	if (err)
-		goto err_out_free_res;
+		goto clean3;	/* vaddr, intmode+region, pci */
 	hpsa_find_board_params(h);
 
 	if (!hpsa_CISS_signature_present(h)) {
 		err = -ENODEV;
-		goto err_out_free_res;
+		goto clean4;	/* cfgtables, vaddr, intmode+region, pci */
 	}
 	hpsa_set_driver_support_bits(h);
 	hpsa_p600_dma_prefetch_quirk(h);
 	err = hpsa_enter_simple_mode(h);
 	if (err)
-		goto err_out_free_res;
+		goto clean4;	/* cfgtables, vaddr, intmode+region, pci */
 	return 0;
 
-err_out_free_res:
-	if (h->transtable)
-		iounmap(h->transtable);
-	if (h->cfgtable)
-		iounmap(h->cfgtable);
-	if (h->vaddr)
-		iounmap(h->vaddr);
-	pci_disable_device(h->pdev);
+clean4:	/* cfgtables, vaddr, intmode+region, pci */
+	hpsa_free_cfgtables(h);
+clean3:	/* vaddr, intmode+region, pci */
+	iounmap(h->vaddr);
+clean2:	/* intmode+region, pci */
+	hpsa_disable_interrupt_mode(h);
 	pci_release_regions(h->pdev);
+clean1:	/* pci */
+	pci_disable_device(h->pdev);
 	return err;
 }
 
@@ -7025,8 +7051,9 @@ static int hpsa_request_irqs(struct ctlr_info *h,
 		}
 	}
 	if (rc) {
-		dev_err(&h->pdev->dev, "unable to get irq %d for %s\n",
+		dev_err(&h->pdev->dev, "failed to get irq %d for %s\n",
 		       h->intr[h->intr_mode], h->devname);
+		hpsa_free_irqs(h);
 		return -ENODEV;
 	}
 	return 0;
@@ -7078,15 +7105,11 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
 	kfree(h->ioaccel1_blockFetchTable);
 	kfree(h->blockFetchTable);
 	hpsa_free_reply_queues(h);
-	if (h->vaddr)
-		iounmap(h->vaddr);
-	if (h->transtable)
-		iounmap(h->transtable);
-	if (h->cfgtable)
-		iounmap(h->cfgtable);
-	hpsa_disable_interrupt_mode(h);
+	hpsa_free_cfgtables(h);			/* pci_init 4 */
+	iounmap(h->vaddr);			/* pci_init 3 */
+	hpsa_disable_interrupt_mode(h);		/* pci_init 2 */
 	pci_disable_device(h->pdev);
-	pci_release_regions(h->pdev);
+	pci_release_regions(h->pdev);		/* pci_init 2 */
 	kfree(h);
 }
 
@@ -7404,7 +7427,7 @@ reinit_after_soft_reset:
 			dac = 0;
 		} else {
 			dev_err(&pdev->dev, "no suitable DMA available\n");
-			goto clean1;
+			goto clean2;
 		}
 	}
 
@@ -7515,6 +7538,7 @@ clean4:
 clean2_and_free_irqs:
 	hpsa_free_irqs(h);
 clean2:
+	hpsa_free_pci_init(h);
 clean1:
 	if (h->resubmit_wq)
 		destroy_workqueue(h->resubmit_wq);
@@ -7606,12 +7630,10 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 	destroy_workqueue(h->resubmit_wq);
 	hpsa_unregister_scsi(h);	/* unhook from SCSI subsystem */
 
-	/* includes hpsa_free_irqs and hpsa_disable_interrupt_mode */
+	/* includes hpsa_free_irqs */
+	/* includes hpsa_disable_interrupt_mode - pci_init 2 */
 	hpsa_shutdown(pdev);
 
-	iounmap(h->vaddr);
-	iounmap(h->transtable);
-	iounmap(h->cfgtable);
 	hpsa_free_device_info(h);
 	hpsa_free_sg_chain_blocks(h);
 	pci_free_consistent(h->pdev,
@@ -7626,8 +7648,10 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 	kfree(h->ioaccel1_blockFetchTable);
 	kfree(h->ioaccel2_blockFetchTable);
 	kfree(h->hba_inquiry_data);
-	pci_disable_device(pdev);
-	pci_release_regions(pdev);
+
+	/* includes hpsa_disable_interrupt_mode - pci_init 2 */
+	hpsa_free_pci_init(h);
+
 	free_percpu(h->lockup_detected);
 	kfree(h);
 }


  parent reply	other threads:[~2015-03-17 20:05 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-17 20:02 [PATCH v3 00/42] hpsa updates Don Brace
2015-03-17 20:02 ` [PATCH v3 01/42] hpsa: add masked physical devices into h->dev[] array Don Brace
2015-03-17 20:02 ` [PATCH v3 02/42] hpsa: clean up host, channel, target, lun prints Don Brace
2015-03-17 20:02 ` [PATCH v3 03/42] hpsa: rework controller command submission Don Brace
2015-03-27 15:11   ` Tomas Henzl
2015-03-27 18:04     ` brace
2015-03-17 20:02 ` [PATCH v3 04/42] hpsa: clean up aborts Don Brace
2015-03-17 20:02 ` [PATCH v3 05/42] hpsa: decrement h->commands_outstanding in fail_all_outstanding_cmds Don Brace
2015-04-02 13:33   ` Tomas Henzl
2015-03-17 20:02 ` [PATCH v3 06/42] hpsa: hpsa decode sense data for io and tmf Don Brace
2015-03-17 20:03 ` [PATCH v3 07/42] hpsa: allow lockup detected to be viewed via sysfs Don Brace
2015-03-17 20:03 ` [PATCH v3 08/42] hpsa: make function names consistent Don Brace
2015-03-17 20:03 ` [PATCH v3 09/42] hpsa: factor out hpsa_init_cmd function Don Brace
2015-03-17 20:03 ` [PATCH v3 10/42] hpsa: do not ignore return value of hpsa_register_scsi Don Brace
2015-03-17 20:03 ` [PATCH v3 11/42] hpsa: try resubmitting down raid path on task set full Don Brace
2015-03-17 20:03 ` [PATCH v3 12/42] hpsa: factor out hpsa_ioaccel_submit function Don Brace
2015-03-17 20:03 ` [PATCH v3 13/42] hpsa: print accurate SSD Smart Path Enabled status Don Brace
2015-03-17 20:03 ` [PATCH v3 14/42] hpsa: use ioaccel2 path to submit IOs to physical drives in HBA mode Don Brace
2015-03-17 20:03 ` [PATCH v3 15/42] hpsa: Get queue depth from identify physical bmic for physical disks Don Brace
2015-03-17 20:03 ` [PATCH v3 16/42] hpsa: break hpsa_free_irqs_and_disable_msix into two functions Don Brace
2015-03-17 20:03 ` Don Brace [this message]
2015-03-17 20:04 ` [PATCH v3 18/42] hpsa: refactor freeing of resources into more logical functions Don Brace
2015-03-17 20:04 ` [PATCH v3 19/42] hpsa: add ioaccel sg chaining for the ioaccel2 path Don Brace
2015-03-17 20:04 ` [PATCH v3 20/42] hpsa: add more ioaccel2 error handling, including underrun statuses Don Brace
2015-03-17 20:04 ` [PATCH v3 21/42] hpsa: do not check cmd_alloc return value - it cannnot return NULL Don Brace
2015-03-17 20:04 ` [PATCH v3 22/42] hpsa: correct return values from driver functions Don Brace
2015-03-17 20:04 ` [PATCH v3 23/42] hpsa: clean up driver init Don Brace
2015-03-17 20:04 ` [PATCH v3 24/42] hpsa: clean up some error reporting output in abort handler Don Brace
2015-03-17 20:04 ` [PATCH v3 25/42] hpsa: do not print ioaccel2 warning messages about unusual completions Don Brace
2015-03-17 20:04 ` [PATCH v3 26/42] hpsa: add support sending aborts to physical devices via the ioaccel2 path Don Brace
2015-03-17 20:04 ` [PATCH v3 27/42] hpsa: use helper routines for finishing commands Don Brace
2015-03-17 20:04 ` [PATCH v3 28/42] hpsa: don't return abort request until target is complete Don Brace
2015-03-17 20:05 ` [PATCH v3 29/42] hpsa: refactor and rework support for sending TEST_UNIT_READY Don Brace
2015-03-17 20:05 ` [PATCH v3 30/42] hpsa: performance tweak for hpsa_scatter_gather() Don Brace
2015-03-17 20:05 ` [PATCH v3 31/42] hpsa: call pci_release_regions after pci_disable_device Don Brace
2015-03-17 20:05 ` [PATCH v3 32/42] hpsa: skip free_irq calls if irqs are not allocated Don Brace
2015-03-17 20:05 ` [PATCH v3 33/42] hpsa: cleanup for init_one step 2 in kdump Don Brace
2015-03-17 20:05 ` [PATCH v3 34/42] hpsa: fix try_soft_reset error handling Don Brace
2015-03-17 20:05 ` [PATCH v3 35/42] hpsa: create workqueue after the driver is ready for use Don Brace
2015-03-17 20:06 ` [PATCH v3 36/42] hpsa: add interrupt number to /proc/interrupts interrupt name Don Brace
2015-03-17 20:06 ` [PATCH v3 37/42] hpsa: use block layer tag for command allocation Don Brace
2015-03-23 16:57   ` Tomas Henzl
     [not found]     ` <07F70BBF6832E34FA1C923241E8833AB486892F9@BBYEXM01.pmc-sierra.internal>
2015-03-25 18:33       ` Webb Scales
2015-03-26 12:47         ` Tomas Henzl
2015-03-26 14:38           ` Webb Scales
2015-03-26 15:10             ` Tomas Henzl
2015-03-26 15:18               ` Webb Scales
2015-04-10 15:13                 ` James Bottomley
2015-03-27 18:49     ` brace
2015-03-17 20:06 ` [PATCH v3 38/42] hpsa: use scsi host_no as hpsa controller number Don Brace
2015-03-17 20:07 ` [PATCH v3 39/42] hpsa: propagate the error code in hpsa_kdump_soft_reset Don Brace
2015-03-17 20:07 ` [PATCH v3 40/42] hpsa: cleanup reset Don Brace
2015-03-17 20:07 ` [PATCH v3 41/42] hpsa: change driver version Don Brace
2015-03-17 20:07 ` [PATCH v3 42/42] hpsa: add PMC to copyright Don Brace

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150317200357.19856.32749.stgit@brunhilda \
    --to=don.brace@pmcs.com \
    --cc=Justin.Lindley@pmcs.com \
    --cc=Kevin.Barnett@pmcs.com \
    --cc=brace@pmcs.com \
    --cc=hch@infradead.org \
    --cc=james.bottomley@parallels.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=scott.teel@pmcs.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.