From: Icenowy Zheng <icenowy@aosc.io>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Liam Girdwood <lgirdwood@gmail.com>
Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 07/11] regulator: axp20x-regulator: add support for AXP803
Date: Wed, 5 Apr 2017 02:01:41 +0800 [thread overview]
Message-ID: <20170404180145.12897-8-icenowy@aosc.io> (raw)
In-Reply-To: <20170404180145.12897-1-icenowy@aosc.io>
AXP803 PMIC also have a series of regulators (DCDCs and LDOs)
controllable via I2C/RSB bus.
Add support for them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
drivers/regulator/axp20x-regulator.c | 135 +++++++++++++++++++++++++++++++----
include/linux/mfd/axp20x.h | 37 ++++++++++
2 files changed, 158 insertions(+), 14 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 0b9d4e3e52c7..219a731df392 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -355,6 +355,81 @@ static const struct regulator_desc axp809_regulators[] = {
AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
};
+static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000),
+ REGULATOR_LINEAR_RANGE(1200000, 0x47, 0x4b, 20000),
+};
+
+static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
+ REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 10000),
+ REGULATOR_LINEAR_RANGE(1140000, 0x21, 0x43, 20000),
+};
+
+static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
+ REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
+};
+
+static const struct regulator_linear_range axp803_dldo2_ranges[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
+ REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
+};
+
+static const struct regulator_desc axp803_regulators[] = {
+ AXP_DESC(AXP803, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+ AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+ AXP_DESC_RANGES(AXP803, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(1)),
+ AXP_DESC_RANGES(AXP803, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(2)),
+ AXP_DESC_RANGES(AXP803, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(3)),
+ AXP_DESC_RANGES(AXP803, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges,
+ 68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(4)),
+ AXP_DESC_RANGES(AXP803, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges,
+ 72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(5)),
+ /* secondary switchable output of DCDC1 */
+ AXP_DESC_SW(AXP803, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
+ BIT(7)),
+ AXP_DESC(AXP803, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
+ AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
+ AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
+ AXP_DESC(AXP803, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
+ AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges,
+ 32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
+ BIT(4)),
+ AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
+ AXP_DESC(AXP803, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
+ AXP_DESC(AXP803, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+ AXP_DESC(AXP803, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+ AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+ AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
+ AXP803_FLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
+ AXP_DESC(AXP803, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
+ AXP803_FLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
+ AXP_DESC_IO(AXP803, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
+ AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+ AXP_DESC_IO(AXP803, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
+ AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+ AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc_ldo", "ips", 3000),
+};
+
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -377,6 +452,13 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
* (See include/linux/mfd/axp20x.h)
*/
reg = AXP806_DCDC_FREQ_CTRL;
+ case AXP803_ID:
+ /*
+ * AXP803 also have DCDC work frequency setting register at a
+ * different position.
+ */
+ if (axp20x->variant == AXP803_ID)
+ reg = AXP803_DCDC_FREQ_CTRL;
case AXP221_ID:
case AXP223_ID:
case AXP809_ID:
@@ -474,7 +556,13 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1);
workmode <<= id - AXP22X_DCDC1;
break;
+ case AXP803_ID:
+ if (id < AXP803_DCDC1 || id > AXP803_DCDC6)
+ return -EINVAL;
+ mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP803_DCDC1);
+ workmode <<= id - AXP803_DCDC1;
+ break;
default:
/* should not happen */
WARN_ON(1);
@@ -492,20 +580,34 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
{
u32 reg = 0;
- /* Only AXP806 has poly-phase outputs */
- if (axp20x->variant != AXP806_ID)
+ /*
+ * Currently in our supported AXP variants, only AXP806 and AXP803
+ * have polyphase regulators.
+ */
+ switch (axp20x->variant) {
+ case AXP806_ID:
+ regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
+
+ switch (id) {
+ case AXP806_DCDCB:
+ return (((reg & GENMASK(7, 6)) == BIT(6)) ||
+ ((reg & GENMASK(7, 6)) == BIT(7)));
+ case AXP806_DCDCC:
+ return ((reg & GENMASK(7, 6)) == BIT(7));
+ case AXP806_DCDCE:
+ return !!(reg & BIT(5));
+ }
+ case AXP803_ID:
+ regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, ®);
+
+ switch (id) {
+ case AXP803_DCDC3:
+ return !!(reg & BIT(6));
+ case AXP803_DCDC6:
+ return !!(reg & BIT(7));
+ }
+ default:
return false;
-
- regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
-
- switch (id) {
- case AXP806_DCDCB:
- return (((reg & GENMASK(7, 6)) == BIT(6)) ||
- ((reg & GENMASK(7, 6)) == BIT(7)));
- case AXP806_DCDCC:
- return ((reg & GENMASK(7, 6)) == BIT(7));
- case AXP806_DCDCE:
- return !!(reg & BIT(5));
}
return false;
@@ -548,6 +650,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
regulators = axp809_regulators;
nregulators = AXP809_REG_ID_MAX;
break;
+ case AXP803_ID:
+ regulators = axp803_regulators;
+ nregulators = AXP803_REG_ID_MAX;
+ break;
default:
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
axp20x->variant);
@@ -579,7 +685,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
* name.
*/
if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
- (regulators == axp809_regulators && i == AXP809_DC1SW)) {
+ (regulators == axp809_regulators && i == AXP809_DC1SW) ||
+ (regulators == axp803_regulators && i == AXP803_DC1SW)) {
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
GFP_KERNEL);
*new_desc = regulators[i];
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index b3220ef374d3..858d5b1b43b9 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -119,6 +119,17 @@ enum axp20x_variants {
#define AXP806_BUS_ADDR_EXT 0xfe
#define AXP806_REG_ADDR_EXT 0xff
+#define AXP803_POLYPHASE_CTRL 0x14
+#define AXP803_FLDO1_V_OUT 0x1c
+#define AXP803_FLDO2_V_OUT 0x1d
+#define AXP803_DCDC1_V_OUT 0x20
+#define AXP803_DCDC2_V_OUT 0x21
+#define AXP803_DCDC3_V_OUT 0x22
+#define AXP803_DCDC4_V_OUT 0x23
+#define AXP803_DCDC5_V_OUT 0x24
+#define AXP803_DCDC6_V_OUT 0x25
+#define AXP803_DCDC_FREQ_CTRL 0x3b
+
/* Interrupt */
#define AXP152_IRQ1_EN 0x40
#define AXP152_IRQ2_EN 0x41
@@ -350,6 +361,32 @@ enum {
AXP809_REG_ID_MAX,
};
+enum {
+ AXP803_DCDC1 = 0,
+ AXP803_DCDC2,
+ AXP803_DCDC3,
+ AXP803_DCDC4,
+ AXP803_DCDC5,
+ AXP803_DCDC6,
+ AXP803_DC1SW,
+ AXP803_ALDO1,
+ AXP803_ALDO2,
+ AXP803_ALDO3,
+ AXP803_DLDO1,
+ AXP803_DLDO2,
+ AXP803_DLDO3,
+ AXP803_DLDO4,
+ AXP803_ELDO1,
+ AXP803_ELDO2,
+ AXP803_ELDO3,
+ AXP803_FLDO1,
+ AXP803_FLDO2,
+ AXP803_RTC_LDO,
+ AXP803_LDO_IO0,
+ AXP803_LDO_IO1,
+ AXP803_REG_ID_MAX,
+};
+
/* IRQs */
enum {
AXP152_IRQ_LDO0IN_CONNECT = 1,
--
2.12.2
WARNING: multiple messages have this Message-ID (diff)
From: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
To: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
Subject: [PATCH 07/11] regulator: axp20x-regulator: add support for AXP803
Date: Wed, 5 Apr 2017 02:01:41 +0800 [thread overview]
Message-ID: <20170404180145.12897-8-icenowy@aosc.io> (raw)
In-Reply-To: <20170404180145.12897-1-icenowy-h8G6r0blFSE@public.gmane.org>
AXP803 PMIC also have a series of regulators (DCDCs and LDOs)
controllable via I2C/RSB bus.
Add support for them.
Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
---
drivers/regulator/axp20x-regulator.c | 135 +++++++++++++++++++++++++++++++----
include/linux/mfd/axp20x.h | 37 ++++++++++
2 files changed, 158 insertions(+), 14 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 0b9d4e3e52c7..219a731df392 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -355,6 +355,81 @@ static const struct regulator_desc axp809_regulators[] = {
AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
};
+static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000),
+ REGULATOR_LINEAR_RANGE(1200000, 0x47, 0x4b, 20000),
+};
+
+static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
+ REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 10000),
+ REGULATOR_LINEAR_RANGE(1140000, 0x21, 0x43, 20000),
+};
+
+static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
+ REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
+};
+
+static const struct regulator_linear_range axp803_dldo2_ranges[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
+ REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
+};
+
+static const struct regulator_desc axp803_regulators[] = {
+ AXP_DESC(AXP803, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+ AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+ AXP_DESC_RANGES(AXP803, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(1)),
+ AXP_DESC_RANGES(AXP803, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(2)),
+ AXP_DESC_RANGES(AXP803, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(3)),
+ AXP_DESC_RANGES(AXP803, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges,
+ 68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(4)),
+ AXP_DESC_RANGES(AXP803, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges,
+ 72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(5)),
+ /* secondary switchable output of DCDC1 */
+ AXP_DESC_SW(AXP803, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
+ BIT(7)),
+ AXP_DESC(AXP803, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
+ AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
+ AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
+ AXP_DESC(AXP803, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
+ AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges,
+ 32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
+ BIT(4)),
+ AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
+ AXP_DESC(AXP803, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
+ AXP_DESC(AXP803, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+ AXP_DESC(AXP803, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+ AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+ AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
+ AXP803_FLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
+ AXP_DESC(AXP803, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
+ AXP803_FLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
+ AXP_DESC_IO(AXP803, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
+ AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+ AXP_DESC_IO(AXP803, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
+ AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+ AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc_ldo", "ips", 3000),
+};
+
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -377,6 +452,13 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
* (See include/linux/mfd/axp20x.h)
*/
reg = AXP806_DCDC_FREQ_CTRL;
+ case AXP803_ID:
+ /*
+ * AXP803 also have DCDC work frequency setting register at a
+ * different position.
+ */
+ if (axp20x->variant == AXP803_ID)
+ reg = AXP803_DCDC_FREQ_CTRL;
case AXP221_ID:
case AXP223_ID:
case AXP809_ID:
@@ -474,7 +556,13 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1);
workmode <<= id - AXP22X_DCDC1;
break;
+ case AXP803_ID:
+ if (id < AXP803_DCDC1 || id > AXP803_DCDC6)
+ return -EINVAL;
+ mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP803_DCDC1);
+ workmode <<= id - AXP803_DCDC1;
+ break;
default:
/* should not happen */
WARN_ON(1);
@@ -492,20 +580,34 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
{
u32 reg = 0;
- /* Only AXP806 has poly-phase outputs */
- if (axp20x->variant != AXP806_ID)
+ /*
+ * Currently in our supported AXP variants, only AXP806 and AXP803
+ * have polyphase regulators.
+ */
+ switch (axp20x->variant) {
+ case AXP806_ID:
+ regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
+
+ switch (id) {
+ case AXP806_DCDCB:
+ return (((reg & GENMASK(7, 6)) == BIT(6)) ||
+ ((reg & GENMASK(7, 6)) == BIT(7)));
+ case AXP806_DCDCC:
+ return ((reg & GENMASK(7, 6)) == BIT(7));
+ case AXP806_DCDCE:
+ return !!(reg & BIT(5));
+ }
+ case AXP803_ID:
+ regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, ®);
+
+ switch (id) {
+ case AXP803_DCDC3:
+ return !!(reg & BIT(6));
+ case AXP803_DCDC6:
+ return !!(reg & BIT(7));
+ }
+ default:
return false;
-
- regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
-
- switch (id) {
- case AXP806_DCDCB:
- return (((reg & GENMASK(7, 6)) == BIT(6)) ||
- ((reg & GENMASK(7, 6)) == BIT(7)));
- case AXP806_DCDCC:
- return ((reg & GENMASK(7, 6)) == BIT(7));
- case AXP806_DCDCE:
- return !!(reg & BIT(5));
}
return false;
@@ -548,6 +650,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
regulators = axp809_regulators;
nregulators = AXP809_REG_ID_MAX;
break;
+ case AXP803_ID:
+ regulators = axp803_regulators;
+ nregulators = AXP803_REG_ID_MAX;
+ break;
default:
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
axp20x->variant);
@@ -579,7 +685,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
* name.
*/
if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
- (regulators == axp809_regulators && i == AXP809_DC1SW)) {
+ (regulators == axp809_regulators && i == AXP809_DC1SW) ||
+ (regulators == axp803_regulators && i == AXP803_DC1SW)) {
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
GFP_KERNEL);
*new_desc = regulators[i];
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index b3220ef374d3..858d5b1b43b9 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -119,6 +119,17 @@ enum axp20x_variants {
#define AXP806_BUS_ADDR_EXT 0xfe
#define AXP806_REG_ADDR_EXT 0xff
+#define AXP803_POLYPHASE_CTRL 0x14
+#define AXP803_FLDO1_V_OUT 0x1c
+#define AXP803_FLDO2_V_OUT 0x1d
+#define AXP803_DCDC1_V_OUT 0x20
+#define AXP803_DCDC2_V_OUT 0x21
+#define AXP803_DCDC3_V_OUT 0x22
+#define AXP803_DCDC4_V_OUT 0x23
+#define AXP803_DCDC5_V_OUT 0x24
+#define AXP803_DCDC6_V_OUT 0x25
+#define AXP803_DCDC_FREQ_CTRL 0x3b
+
/* Interrupt */
#define AXP152_IRQ1_EN 0x40
#define AXP152_IRQ2_EN 0x41
@@ -350,6 +361,32 @@ enum {
AXP809_REG_ID_MAX,
};
+enum {
+ AXP803_DCDC1 = 0,
+ AXP803_DCDC2,
+ AXP803_DCDC3,
+ AXP803_DCDC4,
+ AXP803_DCDC5,
+ AXP803_DCDC6,
+ AXP803_DC1SW,
+ AXP803_ALDO1,
+ AXP803_ALDO2,
+ AXP803_ALDO3,
+ AXP803_DLDO1,
+ AXP803_DLDO2,
+ AXP803_DLDO3,
+ AXP803_DLDO4,
+ AXP803_ELDO1,
+ AXP803_ELDO2,
+ AXP803_ELDO3,
+ AXP803_FLDO1,
+ AXP803_FLDO2,
+ AXP803_RTC_LDO,
+ AXP803_LDO_IO0,
+ AXP803_LDO_IO1,
+ AXP803_REG_ID_MAX,
+};
+
/* IRQs */
enum {
AXP152_IRQ_LDO0IN_CONNECT = 1,
--
2.12.2
WARNING: multiple messages have this Message-ID (diff)
From: icenowy@aosc.io (Icenowy Zheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/11] regulator: axp20x-regulator: add support for AXP803
Date: Wed, 5 Apr 2017 02:01:41 +0800 [thread overview]
Message-ID: <20170404180145.12897-8-icenowy@aosc.io> (raw)
In-Reply-To: <20170404180145.12897-1-icenowy@aosc.io>
AXP803 PMIC also have a series of regulators (DCDCs and LDOs)
controllable via I2C/RSB bus.
Add support for them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
drivers/regulator/axp20x-regulator.c | 135 +++++++++++++++++++++++++++++++----
include/linux/mfd/axp20x.h | 37 ++++++++++
2 files changed, 158 insertions(+), 14 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 0b9d4e3e52c7..219a731df392 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -355,6 +355,81 @@ static const struct regulator_desc axp809_regulators[] = {
AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
};
+static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000),
+ REGULATOR_LINEAR_RANGE(1200000, 0x47, 0x4b, 20000),
+};
+
+static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
+ REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 10000),
+ REGULATOR_LINEAR_RANGE(1140000, 0x21, 0x43, 20000),
+};
+
+static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
+ REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
+};
+
+static const struct regulator_linear_range axp803_dldo2_ranges[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
+ REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
+};
+
+static const struct regulator_desc axp803_regulators[] = {
+ AXP_DESC(AXP803, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+ AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+ AXP_DESC_RANGES(AXP803, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(1)),
+ AXP_DESC_RANGES(AXP803, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(2)),
+ AXP_DESC_RANGES(AXP803, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges,
+ 76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(3)),
+ AXP_DESC_RANGES(AXP803, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges,
+ 68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(4)),
+ AXP_DESC_RANGES(AXP803, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges,
+ 72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+ BIT(5)),
+ /* secondary switchable output of DCDC1 */
+ AXP_DESC_SW(AXP803, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
+ BIT(7)),
+ AXP_DESC(AXP803, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
+ AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
+ AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
+ AXP_DESC(AXP803, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
+ AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges,
+ 32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
+ BIT(4)),
+ AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
+ AXP_DESC(AXP803, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
+ AXP_DESC(AXP803, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+ AXP_DESC(AXP803, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+ AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
+ AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+ AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
+ AXP803_FLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
+ AXP_DESC(AXP803, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
+ AXP803_FLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
+ AXP_DESC_IO(AXP803, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
+ AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+ AXP_DESC_IO(AXP803, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
+ AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+ AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc_ldo", "ips", 3000),
+};
+
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -377,6 +452,13 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
* (See include/linux/mfd/axp20x.h)
*/
reg = AXP806_DCDC_FREQ_CTRL;
+ case AXP803_ID:
+ /*
+ * AXP803 also have DCDC work frequency setting register at a
+ * different position.
+ */
+ if (axp20x->variant == AXP803_ID)
+ reg = AXP803_DCDC_FREQ_CTRL;
case AXP221_ID:
case AXP223_ID:
case AXP809_ID:
@@ -474,7 +556,13 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1);
workmode <<= id - AXP22X_DCDC1;
break;
+ case AXP803_ID:
+ if (id < AXP803_DCDC1 || id > AXP803_DCDC6)
+ return -EINVAL;
+ mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP803_DCDC1);
+ workmode <<= id - AXP803_DCDC1;
+ break;
default:
/* should not happen */
WARN_ON(1);
@@ -492,20 +580,34 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
{
u32 reg = 0;
- /* Only AXP806 has poly-phase outputs */
- if (axp20x->variant != AXP806_ID)
+ /*
+ * Currently in our supported AXP variants, only AXP806 and AXP803
+ * have polyphase regulators.
+ */
+ switch (axp20x->variant) {
+ case AXP806_ID:
+ regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
+
+ switch (id) {
+ case AXP806_DCDCB:
+ return (((reg & GENMASK(7, 6)) == BIT(6)) ||
+ ((reg & GENMASK(7, 6)) == BIT(7)));
+ case AXP806_DCDCC:
+ return ((reg & GENMASK(7, 6)) == BIT(7));
+ case AXP806_DCDCE:
+ return !!(reg & BIT(5));
+ }
+ case AXP803_ID:
+ regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, ®);
+
+ switch (id) {
+ case AXP803_DCDC3:
+ return !!(reg & BIT(6));
+ case AXP803_DCDC6:
+ return !!(reg & BIT(7));
+ }
+ default:
return false;
-
- regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
-
- switch (id) {
- case AXP806_DCDCB:
- return (((reg & GENMASK(7, 6)) == BIT(6)) ||
- ((reg & GENMASK(7, 6)) == BIT(7)));
- case AXP806_DCDCC:
- return ((reg & GENMASK(7, 6)) == BIT(7));
- case AXP806_DCDCE:
- return !!(reg & BIT(5));
}
return false;
@@ -548,6 +650,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
regulators = axp809_regulators;
nregulators = AXP809_REG_ID_MAX;
break;
+ case AXP803_ID:
+ regulators = axp803_regulators;
+ nregulators = AXP803_REG_ID_MAX;
+ break;
default:
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
axp20x->variant);
@@ -579,7 +685,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
* name.
*/
if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
- (regulators == axp809_regulators && i == AXP809_DC1SW)) {
+ (regulators == axp809_regulators && i == AXP809_DC1SW) ||
+ (regulators == axp803_regulators && i == AXP803_DC1SW)) {
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
GFP_KERNEL);
*new_desc = regulators[i];
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index b3220ef374d3..858d5b1b43b9 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -119,6 +119,17 @@ enum axp20x_variants {
#define AXP806_BUS_ADDR_EXT 0xfe
#define AXP806_REG_ADDR_EXT 0xff
+#define AXP803_POLYPHASE_CTRL 0x14
+#define AXP803_FLDO1_V_OUT 0x1c
+#define AXP803_FLDO2_V_OUT 0x1d
+#define AXP803_DCDC1_V_OUT 0x20
+#define AXP803_DCDC2_V_OUT 0x21
+#define AXP803_DCDC3_V_OUT 0x22
+#define AXP803_DCDC4_V_OUT 0x23
+#define AXP803_DCDC5_V_OUT 0x24
+#define AXP803_DCDC6_V_OUT 0x25
+#define AXP803_DCDC_FREQ_CTRL 0x3b
+
/* Interrupt */
#define AXP152_IRQ1_EN 0x40
#define AXP152_IRQ2_EN 0x41
@@ -350,6 +361,32 @@ enum {
AXP809_REG_ID_MAX,
};
+enum {
+ AXP803_DCDC1 = 0,
+ AXP803_DCDC2,
+ AXP803_DCDC3,
+ AXP803_DCDC4,
+ AXP803_DCDC5,
+ AXP803_DCDC6,
+ AXP803_DC1SW,
+ AXP803_ALDO1,
+ AXP803_ALDO2,
+ AXP803_ALDO3,
+ AXP803_DLDO1,
+ AXP803_DLDO2,
+ AXP803_DLDO3,
+ AXP803_DLDO4,
+ AXP803_ELDO1,
+ AXP803_ELDO2,
+ AXP803_ELDO3,
+ AXP803_FLDO1,
+ AXP803_FLDO2,
+ AXP803_RTC_LDO,
+ AXP803_LDO_IO0,
+ AXP803_LDO_IO1,
+ AXP803_REG_ID_MAX,
+};
+
/* IRQs */
enum {
AXP152_IRQ_LDO0IN_CONNECT = 1,
--
2.12.2
next prev parent reply other threads:[~2017-04-04 18:06 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-04 18:01 [PATCH 00/11] AXP803 PMIC support for Pine64 Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` [PATCH 01/11] arm64: allwinner: a64: enable RSB on A64 Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-05 3:48 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-05 3:48 ` Chen-Yu Tsai
2017-04-05 3:48 ` Chen-Yu Tsai
2017-04-04 18:01 ` [PATCH 02/11] arm64: allwinner: a64: add NMI controller " Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-05 3:51 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-05 3:51 ` Chen-Yu Tsai
2017-04-05 3:51 ` Chen-Yu Tsai
2017-04-05 6:11 ` [linux-sunxi] " Maxime Ripard
2017-04-05 6:11 ` Maxime Ripard
2017-04-05 6:20 ` Chen-Yu Tsai
2017-04-05 6:20 ` Chen-Yu Tsai
2017-04-05 6:20 ` Chen-Yu Tsai
2017-04-05 7:28 ` [linux-sunxi] " Maxime Ripard
2017-04-05 7:28 ` Maxime Ripard
2017-04-05 7:28 ` Maxime Ripard
2017-04-05 11:59 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-05 11:59 ` Chen-Yu Tsai
2017-04-05 11:59 ` Chen-Yu Tsai
2017-04-04 18:01 ` [PATCH 03/11] dt-bindings: add device tree binding for X-Powers AXP803 PMIC Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-05 3:52 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-05 3:52 ` Chen-Yu Tsai
2017-04-05 3:52 ` Chen-Yu Tsai
2017-04-04 18:01 ` [PATCH 04/11] mfd: axp20x: support AXP803 variant Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-05 14:58 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-05 14:58 ` Chen-Yu Tsai
2017-04-05 14:58 ` Chen-Yu Tsai
2017-04-04 18:01 ` [PATCH 05/11] arm64: allwinner: a64: add AXP803 node to Pine64 device tree Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` [PATCH 06/11] dt-bindings: add AXP803's regulator info Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng [this message]
2017-04-04 18:01 ` [PATCH 07/11] regulator: axp20x-regulator: add support for AXP803 Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-05 16:01 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-05 16:01 ` Chen-Yu Tsai
2017-04-05 16:01 ` Chen-Yu Tsai
2017-04-04 18:01 ` [PATCH 08/11] mfd: axp20x: add axp20x-regulator cell " Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` [PATCH 09/11] arm64: allwinner: a64: add DTSI file for AXP803 PMIC Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` [PATCH 10/11] arm64: allwinner: a64: enable AXP803 regulators for Pine64 Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-05 6:13 ` Maxime Ripard
2017-04-05 6:13 ` Maxime Ripard
2017-04-05 6:13 ` Maxime Ripard
2017-04-04 18:01 ` [PATCH 11/11] arm64: allwinner: a64: enable Wi-Fi " Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
2017-04-04 18:01 ` Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170404180145.12897-8-icenowy@aosc.io \
--to=icenowy@aosc.io \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.