All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Anholt <eric@anholt.net>
To: dri-devel@lists.freedesktop.org,
	Archit Taneja <architt@codeaurora.org>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Thierry Reding <thierry.reding@gmail.com>
Cc: linux-kernel@vger.kernel.org, Eric Anholt <eric@anholt.net>
Subject: [PATCH 5/8] drm/vc4: Delay DSI host registration until the panel has probed.
Date: Tue, 27 Jun 2017 12:58:36 -0700	[thread overview]
Message-ID: <20170627195839.3338-6-eric@anholt.net> (raw)
In-Reply-To: <20170627195839.3338-1-eric@anholt.net>

The vc4 driver was unusual in that it was delaying the panel lookup
until the attach step, while most DSI hosts will -EPROBE_DEFER until
they get a panel.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 40 ++++++++++++++++------------------------
 1 file changed, 16 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index fca4d7fd677e..31627522dd8c 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -33,6 +33,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
@@ -504,7 +505,6 @@ struct vc4_dsi {
 	struct mipi_dsi_host dsi_host;
 	struct drm_encoder *encoder;
 	struct drm_bridge *bridge;
-	bool is_panel_bridge;
 
 	void __iomem *regs;
 
@@ -1290,7 +1290,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 			       struct mipi_dsi_device *device)
 {
 	struct vc4_dsi *dsi = host_to_dsi(host);
-	int ret = 0;
 
 	dsi->lanes = device->lanes;
 	dsi->channel = device->channel;
@@ -1325,34 +1324,12 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 		return 0;
 	}
 
-	dsi->bridge = of_drm_find_bridge(device->dev.of_node);
-	if (!dsi->bridge) {
-		struct drm_panel *panel =
-			of_drm_find_panel(device->dev.of_node);
-
-		dsi->bridge = drm_panel_bridge_add(panel,
-						   DRM_MODE_CONNECTOR_DSI);
-		if (IS_ERR(dsi->bridge)) {
-			ret = PTR_ERR(dsi->bridge);
-			dsi->bridge = NULL;
-			return ret;
-		}
-		dsi->is_panel_bridge = true;
-	}
-
 	return drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
 }
 
 static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
 			       struct mipi_dsi_device *device)
 {
-	struct vc4_dsi *dsi = host_to_dsi(host);
-
-	if (dsi->is_panel_bridge) {
-		drm_panel_bridge_remove(dsi->bridge);
-		dsi->bridge = NULL;
-	}
-
 	return 0;
 }
 
@@ -1496,6 +1473,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_dev *vc4 = to_vc4_dev(drm);
 	struct vc4_dsi *dsi;
 	struct vc4_dsi_encoder *vc4_dsi_encoder;
+	struct drm_panel *panel;
 	const struct of_device_id *match;
 	dma_cap_mask_t dma_mask;
 	int ret;
@@ -1599,6 +1577,20 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
+					  &panel, &dsi->bridge);
+	if (ret) {
+		dev_info(dev, "find panel: %d\n", ret);
+		return ret;
+	}
+
+	if (panel) {
+		dsi->bridge = devm_drm_panel_bridge_add(dev, panel,
+							DRM_MODE_CONNECTOR_DSI);
+		if (IS_ERR(dsi->bridge))
+			return PTR_ERR(dsi->bridge);
+	}
+
 	/* The esc clock rate is supposed to always be 100Mhz. */
 	ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
 	if (ret) {
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: Eric Anholt <eric@anholt.net>
To: dri-devel@lists.freedesktop.org,
	Archit Taneja <architt@codeaurora.org>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Thierry Reding <thierry.reding@gmail.com>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 5/8] drm/vc4: Delay DSI host registration until the panel has probed.
Date: Tue, 27 Jun 2017 12:58:36 -0700	[thread overview]
Message-ID: <20170627195839.3338-6-eric@anholt.net> (raw)
In-Reply-To: <20170627195839.3338-1-eric@anholt.net>

The vc4 driver was unusual in that it was delaying the panel lookup
until the attach step, while most DSI hosts will -EPROBE_DEFER until
they get a panel.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 40 ++++++++++++++++------------------------
 1 file changed, 16 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index fca4d7fd677e..31627522dd8c 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -33,6 +33,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
@@ -504,7 +505,6 @@ struct vc4_dsi {
 	struct mipi_dsi_host dsi_host;
 	struct drm_encoder *encoder;
 	struct drm_bridge *bridge;
-	bool is_panel_bridge;
 
 	void __iomem *regs;
 
@@ -1290,7 +1290,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 			       struct mipi_dsi_device *device)
 {
 	struct vc4_dsi *dsi = host_to_dsi(host);
-	int ret = 0;
 
 	dsi->lanes = device->lanes;
 	dsi->channel = device->channel;
@@ -1325,34 +1324,12 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 		return 0;
 	}
 
-	dsi->bridge = of_drm_find_bridge(device->dev.of_node);
-	if (!dsi->bridge) {
-		struct drm_panel *panel =
-			of_drm_find_panel(device->dev.of_node);
-
-		dsi->bridge = drm_panel_bridge_add(panel,
-						   DRM_MODE_CONNECTOR_DSI);
-		if (IS_ERR(dsi->bridge)) {
-			ret = PTR_ERR(dsi->bridge);
-			dsi->bridge = NULL;
-			return ret;
-		}
-		dsi->is_panel_bridge = true;
-	}
-
 	return drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
 }
 
 static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
 			       struct mipi_dsi_device *device)
 {
-	struct vc4_dsi *dsi = host_to_dsi(host);
-
-	if (dsi->is_panel_bridge) {
-		drm_panel_bridge_remove(dsi->bridge);
-		dsi->bridge = NULL;
-	}
-
 	return 0;
 }
 
@@ -1496,6 +1473,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 	struct vc4_dev *vc4 = to_vc4_dev(drm);
 	struct vc4_dsi *dsi;
 	struct vc4_dsi_encoder *vc4_dsi_encoder;
+	struct drm_panel *panel;
 	const struct of_device_id *match;
 	dma_cap_mask_t dma_mask;
 	int ret;
@@ -1599,6 +1577,20 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
+					  &panel, &dsi->bridge);
+	if (ret) {
+		dev_info(dev, "find panel: %d\n", ret);
+		return ret;
+	}
+
+	if (panel) {
+		dsi->bridge = devm_drm_panel_bridge_add(dev, panel,
+							DRM_MODE_CONNECTOR_DSI);
+		if (IS_ERR(dsi->bridge))
+			return PTR_ERR(dsi->bridge);
+	}
+
 	/* The esc clock rate is supposed to always be 100Mhz. */
 	ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
 	if (ret) {
-- 
2.11.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2017-06-27 19:59 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-27 19:58 [PATCH 0/8] RPi touchscreen panel driver v4 Eric Anholt
2017-06-27 19:58 ` Eric Anholt
2017-06-27 19:58 ` [PATCH 1/8] drm/vc4: Fix DSI T_INIT timing Eric Anholt
2017-06-27 19:58   ` Eric Anholt
2017-06-29  9:02   ` Andrzej Hajda
2017-06-29  9:02     ` Andrzej Hajda
2017-06-27 19:58 ` [PATCH 2/8] drm/vc4: Fix misleading name of the continuous flag Eric Anholt
2017-06-27 19:58   ` Eric Anholt
2017-06-29  9:03   ` Andrzej Hajda
2017-06-29  9:03     ` Andrzej Hajda
2017-06-27 19:58 ` [PATCH 3/8] drm/vc4: Use drm_mode_vrefresh() in DSI fixup, in case vrefresh is 0 Eric Anholt
2017-06-27 19:58   ` Eric Anholt
2017-06-29  9:24   ` Andrzej Hajda
2017-06-29  9:24     ` Andrzej Hajda
2017-06-27 19:58 ` [PATCH 4/8] drm/bridge: Add a devm_ allocator for panel bridge Eric Anholt
2017-06-27 19:58   ` Eric Anholt
2017-06-29  9:30   ` Andrzej Hajda
2017-06-29  9:30     ` Andrzej Hajda
2017-06-27 19:58 ` Eric Anholt [this message]
2017-06-27 19:58   ` [PATCH 5/8] drm/vc4: Delay DSI host registration until the panel has probed Eric Anholt
2017-06-29  9:42   ` Andrzej Hajda
2017-06-29  9:42     ` Andrzej Hajda
2017-06-27 19:58 ` [PATCH 6/8] drm: Allow DSI devices to be registered before the host registers Eric Anholt
2017-06-27 19:58   ` Eric Anholt
2017-06-29  5:03   ` Archit Taneja
2017-06-29  5:03     ` Archit Taneja
2017-06-29 10:39     ` Andrzej Hajda
2017-06-29 10:39       ` Andrzej Hajda
2017-06-29 15:22       ` Eric Anholt
2017-06-29 15:22         ` Eric Anholt
2017-06-30  8:48         ` Andrzej Hajda
2017-06-30  8:48           ` Andrzej Hajda
2017-07-03 10:56       ` Archit Taneja
2017-07-03 10:56         ` Archit Taneja
2017-07-14 23:01         ` Eric Anholt
2017-07-14 23:01           ` Eric Anholt
2017-07-17 13:39           ` Archit Taneja
2017-07-17 13:39             ` Archit Taneja
2017-07-14 22:58     ` Eric Anholt
2017-07-14 22:58       ` Eric Anholt
2017-07-17  4:26       ` Archit Taneja
2017-07-17  4:26         ` Archit Taneja
2017-07-18 20:13         ` Eric Anholt
2017-07-18 20:13           ` Eric Anholt
2017-07-19  3:29           ` Archit Taneja
2017-07-19  3:29             ` Archit Taneja
2017-08-04  9:29           ` Boris Brezillon
2017-08-04  9:29             ` Boris Brezillon
2017-06-27 19:58 ` [PATCH 7/8] dt-bindings: Document the Raspberry Pi Touchscreen nodes Eric Anholt
2017-06-27 19:58   ` Eric Anholt
2017-06-27 19:58 ` [PATCH 8/8] drm/panel: Add support for the Raspberry Pi 7" Touchscreen Eric Anholt
2017-06-27 19:58   ` Eric Anholt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170627195839.3338-6-eric@anholt.net \
    --to=eric@anholt.net \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=architt@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.