From: Joel Stanley <joel@jms.id.au>
To: Joel Stanley <joel@jms.id.au>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: "Russell King" <linux@armlinux.org.uk>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, "Andrew Jeffery" <andrew@aj.id.au>,
"Rick Altherr" <raltherr@google.com>,
"Brendan Higgins" <brendanhiggins@google.com>,
"Cédric Le Goater" <clg@kaod.org>,
linux-aspeed@lists.ozlabs.org
Subject: [PATCH v2 6/9] ARM: dts: aspeed-ast2500: Add I2C devices
Date: Wed, 4 Oct 2017 17:19:14 +1030 [thread overview]
Message-ID: <20171004064917.2498-7-joel@jms.id.au> (raw)
In-Reply-To: <20171004064917.2498-1-joel@jms.id.au>
Enable the buses that are in use and the devices that are attached.
Currently that includes temperature measurement and EEPROM.
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-ast2500-evb.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 7c90dac99822..dc7d73b02b76 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -59,3 +59,22 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
+
+&i2c3 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ lm75@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+};
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
To: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: "Russell King" <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Andrew Jeffery" <andrew-zrmu5oMJ5Fs@public.gmane.org>,
"Rick Altherr" <raltherr-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
"Brendan Higgins"
<brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
"Cédric Le Goater" <clg-Bxea+6Xhats@public.gmane.org>,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: [PATCH v2 6/9] ARM: dts: aspeed-ast2500: Add I2C devices
Date: Wed, 4 Oct 2017 17:19:14 +1030 [thread overview]
Message-ID: <20171004064917.2498-7-joel@jms.id.au> (raw)
In-Reply-To: <20171004064917.2498-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Enable the buses that are in use and the devices that are attached.
Currently that includes temperature measurement and EEPROM.
Reviewed-by: Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
arch/arm/boot/dts/aspeed-ast2500-evb.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 7c90dac99822..dc7d73b02b76 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -59,3 +59,22 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
+
+&i2c3 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ lm75@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+};
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: joel@jms.id.au (Joel Stanley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/9] ARM: dts: aspeed-ast2500: Add I2C devices
Date: Wed, 4 Oct 2017 17:19:14 +1030 [thread overview]
Message-ID: <20171004064917.2498-7-joel@jms.id.au> (raw)
In-Reply-To: <20171004064917.2498-1-joel@jms.id.au>
Enable the buses that are in use and the devices that are attached.
Currently that includes temperature measurement and EEPROM.
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-ast2500-evb.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 7c90dac99822..dc7d73b02b76 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -59,3 +59,22 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
+
+&i2c3 {
+ status = "okay";
+
+ eeprom at 50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ lm75 at 4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+};
--
2.14.1
next prev parent reply other threads:[~2017-10-04 6:50 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-04 6:49 [PATCH v2 0/9] ARM: dts: aspeed: Device tree updates Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 6:49 ` [PATCH v2 1/9] ARM: dts: aspeed: Move pinctrl subnodes to improve readability Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 6:49 ` [PATCH v2 2/9] ARM: dts: aspeed: Reorder ADC node Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 23:31 ` Andrew Jeffery
2017-10-04 23:31 ` Andrew Jeffery
2017-10-04 6:49 ` [PATCH v2 3/9] ARM: dts: aspeed: Add I2C buses Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 6:49 ` [PATCH v2 4/9] ARM: dts: aspeed-romulus: Add I2C devices Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 23:35 ` Andrew Jeffery
2017-10-04 23:35 ` Andrew Jeffery
2017-10-04 23:35 ` Andrew Jeffery
2017-10-04 6:49 ` [PATCH v2 5/9] ARM: dts: aspeed-palmetto: " Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 6:49 ` Joel Stanley [this message]
2017-10-04 6:49 ` [PATCH v2 6/9] ARM: dts: aspeed-ast2500: " Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 6:49 ` [PATCH v2 7/9] ARM: dts: aspeed: Add aliases for UARTs Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 6:49 ` [PATCH v2 8/9] ARM: dts: aspeed: Correctly order UART nodes Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 23:37 ` Andrew Jeffery
2017-10-04 23:37 ` Andrew Jeffery
2017-10-04 23:37 ` Andrew Jeffery
2017-10-04 6:49 ` [PATCH v2 9/9] ARM: dts: aspeed: Clean up " Joel Stanley
2017-10-04 6:49 ` Joel Stanley
2017-10-04 6:52 ` Joel Stanley
2017-10-04 6:52 ` Joel Stanley
2017-10-04 6:52 ` Joel Stanley
2017-10-04 23:39 ` Andrew Jeffery
2017-10-04 23:39 ` Andrew Jeffery
2017-10-04 23:39 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171004064917.2498-7-joel@jms.id.au \
--to=joel@jms.id.au \
--cc=andrew@aj.id.au \
--cc=brendanhiggins@google.com \
--cc=clg@kaod.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=raltherr@google.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.