From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH v2 8/9] ARM: dts: gose: use demuxer for I2C2
Date: Sun, 31 Dec 2017 12:23:19 +0100 [thread overview]
Message-ID: <20171231112320.3461-9-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20171231112320.3461-1-wsa+renesas@sang-engineering.com>
Create a separate bus for HDMI related I2C2 and provide fallback to GPIO.
Based on work for the r8a7790/lager by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, corrected board name in subject, fixed aliases, switched
to named GPIOs]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7793-gose.dts | 218 ++++++++++++++++++++-----------------
1 file changed, 121 insertions(+), 97 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 51b3ffac8efaad..2b330ef71f4c17 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -48,6 +48,8 @@
aliases {
serial0 = &scif0;
serial1 = &scif1;
+ i2c9 = &gpioi2c2;
+ i2c11 = &i2chdmi;
};
chosen {
@@ -296,6 +298,124 @@
#clock-cells = <0>;
clock-frequency = <148500000>;
};
+
+ gpioi2c2: i2c-9 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ status = "disabled";
+ scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <5>;
+ };
+
+ /*
+ * A fallback to GPIO is provided for I2C2.
+ */
+ i2chdmi: i2c-11 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&i2c2>, <&gpioi2c2>;
+ i2c-bus-name = "i2c-hdmi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ak4643: codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
+ composite-in@20 {
+ compatible = "adi,adv7180cp";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7180_in: endpoint {
+ remote-endpoint = <&composite_con_in>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ adv7180_out: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep>;
+ };
+ };
+ };
+ };
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ hdmi-in@4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ default-input = <0>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7612_in: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ adv7612_out: endpoint {
+ remote-endpoint = <&vin0ep2>;
+ };
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "renesas,r1ex24002", "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ };
};
&du {
@@ -544,107 +664,11 @@
&i2c2 {
pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
+ pinctrl-names = "i2c-hdmi";
status = "okay";
clock-frequency = <100000>;
- ak4643: codec@12 {
- compatible = "asahi-kasei,ak4643";
- #sound-dai-cells = <0>;
- reg = <0x12>;
- };
-
- composite-in@20 {
- compatible = "adi,adv7180cp";
- reg = <0x20>;
- remote = <&vin1>;
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7180_in: endpoint {
- remote-endpoint = <&composite_con_in>;
- };
- };
-
- port@3 {
- reg = <3>;
- adv7180_out: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin1ep>;
- };
- };
- };
- };
-
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio3>;
- interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
- };
- };
-
- hdmi-in@4c {
- compatible = "adi,adv7612";
- reg = <0x4c>;
- interrupt-parent = <&gpio4>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- default-input = <0>;
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7612_in: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
- };
-
- port@2 {
- reg = <2>;
- adv7612_out: endpoint {
- remote-endpoint = <&vin0ep2>;
- };
- };
- };
- };
-
- eeprom@50 {
- compatible = "renesas,r1ex24002", "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
};
&i2c6 {
--
2.11.0
next prev parent reply other threads:[~2017-12-31 11:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-31 11:23 [PATCH v2 0/9] ARM: dts: gen2: add IP core switcher for all busses Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 1/9] ARM: dts: lager: use demuxer for IIC2/I2C2 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 2/9] ARM: dts: lager: use demuxer for IIC3/I2C3 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 3/9] ARM: dts: koelsch: use demuxer for I2C2 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 4/9] ARM: dts: koelsch: use demuxer for I2C4 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 5/9] ARM: dts: porter: use demuxer for I2C2 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 6/9] ARM: dts: alt: use demuxer for I2C1 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 7/9] ARM: dts: silk: " Wolfram Sang
2017-12-31 11:23 ` Wolfram Sang [this message]
2017-12-31 11:23 ` [PATCH v2 9/9] ARM: dts: gose: use demuxer for I2C4 Wolfram Sang
2018-01-02 21:58 ` [PATCH v2 0/9] ARM: dts: gen2: add IP core switcher for all busses Niklas Söderlund
2018-01-02 22:28 ` Wolfram Sang
2018-01-30 10:51 ` Wolfram Sang
2018-01-30 16:45 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171231112320.3461-9-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=horms+renesas@verge.net.au \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.