From: Alexander Duyck <alexander.h.duyck@linux.intel.com> To: linux-mm@kvack.org, akpm@linux-foundation.org, linux-kernel@vger.kernel.org, linux-nvdimm@lists.01.org Cc: pavel.tatashin@microsoft.com, mhocko@suse.com, dave.hansen@intel.com, jglisse@redhat.com, rppt@linux.vnet.ibm.com, mingo@kernel.org, kirill.shutemov@linux.intel.com Subject: [PATCH v5 0/4] Address issues slowing persistent memory initialization Date: Tue, 25 Sep 2018 13:18:08 -0700 [thread overview] Message-ID: <20180925200551.3576.18755.stgit@localhost.localdomain> (raw) This patch set is meant to be a v5 of my earlier submission with the same title[1]. The main changes from the previous version are that I have added a new patch to address an issue that had disabled deferred memory init on my system due to recent config changes related to CONFIG_NO_BOOTMEM. In addition I dropped the original patches 4 and 5 from the previous set as that is going to need to be a separate set of patches. The main thing this patch set achieves is that it allows us to initialize each node worth of persistent memory independently. As a result we reduce page init time by about 2 minutes because instead of taking 30 to 40 seconds per node and going through each node one at a time, we process all 4 nodes in parallel in the case of a 12TB persistent memory setup spread evenly over 4 nodes. [1]: https://lkml.org/lkml/2018/9/21/4 --- Alexander Duyck (4): mm: Remove now defunct NO_BOOTMEM from depends list for deferred init mm: Provide kernel parameter to allow disabling page init poisoning mm: Create non-atomic version of SetPageReserved for init use mm: Defer ZONE_DEVICE page initialization to the point where we init pgmap Documentation/admin-guide/kernel-parameters.txt | 12 +++ arch/csky/Kconfig | 1 include/linux/mm.h | 2 include/linux/page-flags.h | 9 ++ kernel/memremap.c | 24 ++--- mm/Kconfig | 1 mm/debug.c | 46 ++++++++++ mm/hmm.c | 12 ++- mm/memblock.c | 5 - mm/page_alloc.c | 101 ++++++++++++++++++++++- mm/sparse.c | 4 - 11 files changed, 184 insertions(+), 33 deletions(-) -- _______________________________________________ Linux-nvdimm mailing list Linux-nvdimm@lists.01.org https://lists.01.org/mailman/listinfo/linux-nvdimm
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Duyck <alexander.h.duyck@linux.intel.com> To: linux-mm@kvack.org, akpm@linux-foundation.org, linux-kernel@vger.kernel.org, linux-nvdimm@lists.01.org Cc: pavel.tatashin@microsoft.com, mhocko@suse.com, dave.jiang@intel.com, dave.hansen@intel.com, jglisse@redhat.com, rppt@linux.vnet.ibm.com, dan.j.williams@intel.com, logang@deltatee.com, mingo@kernel.org, kirill.shutemov@linux.intel.com Subject: [PATCH v5 0/4] Address issues slowing persistent memory initialization Date: Tue, 25 Sep 2018 13:18:08 -0700 [thread overview] Message-ID: <20180925200551.3576.18755.stgit@localhost.localdomain> (raw) This patch set is meant to be a v5 of my earlier submission with the same title[1]. The main changes from the previous version are that I have added a new patch to address an issue that had disabled deferred memory init on my system due to recent config changes related to CONFIG_NO_BOOTMEM. In addition I dropped the original patches 4 and 5 from the previous set as that is going to need to be a separate set of patches. The main thing this patch set achieves is that it allows us to initialize each node worth of persistent memory independently. As a result we reduce page init time by about 2 minutes because instead of taking 30 to 40 seconds per node and going through each node one at a time, we process all 4 nodes in parallel in the case of a 12TB persistent memory setup spread evenly over 4 nodes. [1]: https://lkml.org/lkml/2018/9/21/4 --- Alexander Duyck (4): mm: Remove now defunct NO_BOOTMEM from depends list for deferred init mm: Provide kernel parameter to allow disabling page init poisoning mm: Create non-atomic version of SetPageReserved for init use mm: Defer ZONE_DEVICE page initialization to the point where we init pgmap Documentation/admin-guide/kernel-parameters.txt | 12 +++ arch/csky/Kconfig | 1 include/linux/mm.h | 2 include/linux/page-flags.h | 9 ++ kernel/memremap.c | 24 ++--- mm/Kconfig | 1 mm/debug.c | 46 ++++++++++ mm/hmm.c | 12 ++- mm/memblock.c | 5 - mm/page_alloc.c | 101 ++++++++++++++++++++++- mm/sparse.c | 4 - 11 files changed, 184 insertions(+), 33 deletions(-) --
next reply other threads:[~2018-09-25 20:18 UTC|newest] Thread overview: 144+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-09-25 20:18 Alexander Duyck [this message] 2018-09-25 20:18 ` [PATCH v5 0/4] Address issues slowing persistent memory initialization Alexander Duyck 2018-09-25 20:19 ` [PATCH v5 1/4] mm: Remove now defunct NO_BOOTMEM from depends list for deferred init Alexander Duyck 2018-09-25 20:19 ` Alexander Duyck 2018-09-25 21:05 ` Mike Rapoport 2018-09-25 21:05 ` Mike Rapoport 2018-09-25 20:20 ` [PATCH v5 2/4] mm: Provide kernel parameter to allow disabling page init poisoning Alexander Duyck 2018-09-25 20:20 ` Alexander Duyck 2018-09-25 20:26 ` Dave Hansen 2018-09-25 20:26 ` Dave Hansen 2018-09-25 20:38 ` Alexander Duyck 2018-09-25 20:38 ` Alexander Duyck 2018-09-25 22:14 ` Dave Hansen 2018-09-25 22:14 ` Dave Hansen 2018-09-25 22:14 ` Dave Hansen 2018-09-25 22:27 ` Alexander Duyck 2018-09-25 22:27 ` Alexander Duyck 2018-09-25 22:27 ` Alexander Duyck 2018-09-26 7:38 ` Michal Hocko 2018-09-26 7:38 ` Michal Hocko 2018-09-26 15:24 ` Alexander Duyck 2018-09-26 15:39 ` Michal Hocko 2018-09-26 15:39 ` Michal Hocko 2018-09-26 15:41 ` Dave Hansen 2018-09-26 15:41 ` Dave Hansen 2018-09-26 16:18 ` Alexander Duyck 2018-09-26 15:36 ` Dave Hansen 2018-09-26 22:36 ` Andrew Morton 2018-09-26 22:36 ` Andrew Morton 2018-09-25 20:20 ` [PATCH v5 3/4] mm: Create non-atomic version of SetPageReserved for init use Alexander Duyck 2018-09-25 20:20 ` Alexander Duyck 2018-09-25 20:21 ` [PATCH v5 4/4] mm: Defer ZONE_DEVICE page initialization to the point where we init pgmap Alexander Duyck 2018-09-25 20:21 ` Alexander Duyck 2018-09-26 7:55 ` Michal Hocko 2018-09-26 18:25 ` Alexander Duyck 2018-09-26 18:25 ` Alexander Duyck 2018-09-26 18:52 ` Dan Williams 2018-09-26 18:52 ` Dan Williams 2018-09-27 11:20 ` Michal Hocko 2018-09-27 11:20 ` Michal Hocko 2018-09-27 11:09 ` Michal Hocko 2018-09-27 11:09 ` Michal Hocko 2018-09-27 12:25 ` Oscar Salvador 2018-09-27 13:13 ` Michal Hocko 2018-09-27 14:50 ` Oscar Salvador 2018-09-27 14:50 ` Oscar Salvador 2018-09-27 14:50 ` Oscar Salvador 2018-09-27 15:41 ` David Hildenbrand 2018-09-27 15:41 ` David Hildenbrand 2018-09-28 8:12 ` Oscar Salvador 2018-09-28 8:12 ` Oscar Salvador 2018-09-28 8:44 ` Oscar Salvador 2018-09-28 8:44 ` Oscar Salvador 2018-09-28 15:50 ` Dan Williams 2018-09-28 15:50 ` Dan Williams 2018-09-27 12:32 ` Oscar Salvador 2018-10-08 21:01 ` Dan Williams 2018-10-08 21:01 ` Dan Williams 2018-10-08 21:38 ` Alexander Duyck 2018-10-08 21:38 ` Alexander Duyck 2018-10-08 22:00 ` Dan Williams 2018-10-08 22:00 ` Dan Williams 2018-10-08 22:00 ` Dan Williams 2018-10-08 22:07 ` Alexander Duyck 2018-10-08 22:07 ` Alexander Duyck 2018-10-08 22:36 ` Alexander Duyck 2018-10-08 22:36 ` Alexander Duyck 2018-10-08 22:59 ` Dan Williams 2018-10-08 23:34 ` [mm PATCH] memremap: Fix reference count for pgmap in devm_memremap_pages Alexander Duyck 2018-10-08 23:34 ` Alexander Duyck 2018-10-09 0:20 ` Dan Williams 2018-10-09 0:20 ` Dan Williams 2018-10-09 17:00 ` [PATCH v5 4/4] mm: Defer ZONE_DEVICE page initialization to the point where we init pgmap Yi Zhang 2018-10-09 17:00 ` Yi Zhang 2018-10-09 18:04 ` Dan Williams 2018-10-09 18:04 ` Dan Williams 2018-10-09 20:26 ` Alexander Duyck 2018-10-09 20:26 ` Alexander Duyck 2018-10-09 21:19 ` Dan Williams 2018-10-09 21:19 ` Dan Williams 2018-10-10 12:52 ` Yi Zhang 2018-10-10 12:52 ` Yi Zhang 2018-10-10 15:27 ` Alexander Duyck 2018-10-10 15:27 ` Alexander Duyck 2018-10-11 8:17 ` Yi Zhang 2018-10-11 8:17 ` Yi Zhang 2018-10-10 9:58 ` Michal Hocko 2018-10-10 16:39 ` Alexander Duyck 2018-10-10 16:39 ` Alexander Duyck 2018-10-10 17:24 ` Michal Hocko 2018-10-10 17:24 ` Michal Hocko 2018-10-10 17:39 ` Alexander Duyck 2018-10-10 17:39 ` Alexander Duyck 2018-10-10 17:53 ` Michal Hocko 2018-10-10 17:53 ` Michal Hocko 2018-10-10 18:13 ` Alexander Duyck 2018-10-10 18:13 ` Alexander Duyck 2018-10-10 18:52 ` Michal Hocko 2018-10-10 18:52 ` Michal Hocko 2018-10-11 8:55 ` Michal Hocko 2018-10-11 8:55 ` Michal Hocko 2018-10-11 17:38 ` Alexander Duyck 2018-10-11 18:22 ` Dan Williams 2018-10-11 18:22 ` Dan Williams 2018-10-17 7:52 ` Michal Hocko 2018-10-17 7:52 ` Michal Hocko 2018-10-17 15:02 ` Alexander Duyck 2018-10-17 15:02 ` Alexander Duyck 2018-10-29 14:12 ` Michal Hocko 2018-10-29 14:12 ` Michal Hocko 2018-10-29 15:59 ` Alexander Duyck 2018-10-29 15:59 ` Alexander Duyck 2018-10-29 15:59 ` Alexander Duyck 2018-10-29 16:35 ` Michal Hocko 2018-10-29 16:35 ` Michal Hocko 2018-10-29 17:01 ` Alexander Duyck 2018-10-29 17:24 ` Michal Hocko 2018-10-29 17:24 ` Michal Hocko 2018-10-29 17:34 ` Dan Williams 2018-10-29 17:34 ` Dan Williams 2018-10-29 17:45 ` Michal Hocko 2018-10-29 17:45 ` Michal Hocko 2018-10-29 17:42 ` Alexander Duyck 2018-10-29 17:42 ` Alexander Duyck 2018-10-29 18:18 ` Michal Hocko 2018-10-29 18:18 ` Michal Hocko 2018-10-29 19:59 ` Alexander Duyck 2018-10-29 19:59 ` Alexander Duyck 2018-10-30 6:29 ` Michal Hocko 2018-10-30 6:29 ` Michal Hocko 2018-10-30 6:55 ` Dan Williams 2018-10-30 8:17 ` Michal Hocko 2018-10-30 8:17 ` Michal Hocko 2018-10-30 15:57 ` Dan Williams 2018-10-30 8:05 ` Oscar Salvador 2018-10-29 15:49 ` Dan Williams 2018-10-29 15:49 ` Dan Williams 2018-10-29 15:56 ` Michal Hocko 2018-10-10 18:18 ` Dan Williams 2018-10-10 18:18 ` Dan Williams 2018-10-11 8:39 ` Yi Zhang 2018-10-11 8:39 ` Yi Zhang 2018-10-11 15:38 ` Alexander Duyck 2018-10-11 15:38 ` Alexander Duyck
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180925200551.3576.18755.stgit@localhost.localdomain \ --to=alexander.h.duyck@linux.intel.com \ --cc=akpm@linux-foundation.org \ --cc=dave.hansen@intel.com \ --cc=jglisse@redhat.com \ --cc=kirill.shutemov@linux.intel.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mm@kvack.org \ --cc=linux-nvdimm@lists.01.org \ --cc=mhocko@suse.com \ --cc=mingo@kernel.org \ --cc=pavel.tatashin@microsoft.com \ --cc=rppt@linux.vnet.ibm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.