All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: robh@kernel.org, heiko@sntech.de, ezequiel@collabora.com,
	xuwei5@hisilicon.com, michal.simek@xilinx.com, pavel@ucw.cz,
	andy.gross@linaro.org
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	daniel.thompson@linaro.org, amit.kucheria@linaro.org,
	linus.walleij@linaro.org, koen.kooi@linaro.org,
	nicolas.dechesne@linaro.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v3 1/7] arm64: dts: rockchip: ficus: Add on-board LED support
Date: Mon, 29 Oct 2018 15:12:39 +0530	[thread overview]
Message-ID: <20181029094245.7886-2-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20181029094245.7886-1-manivannan.sadhasivam@linaro.org>

Add on-board LED support for Ficus board based on the following
standard used by other 96Boards:

red:user1  default-trigger: heartbeat
red:user2  default-trigger: mmc0/disk-activity (onboard-storage)
red:user3  default-trigger: mmc1 (SD-card)
red:user4  default-trigger: none, panic-indicator
red:wlan   default-trigger: phy0tx
red:bt     default-trigger: hci0-power

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
index cce266da28cd..027d428917b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -23,6 +23,52 @@
 		clock-output-names = "clkin_gmac";
 		#clock-cells = <0>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
+			    <&user_led4>, <&wlan_led>, <&bt_led>;
+
+		user_led1 {
+			label = "red:user1";
+			gpios = <&gpio4 25 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "red:user2";
+			gpios = <&gpio4 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3 {
+			label = "red:user3";
+			gpios = <&gpio4 30 0>;
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led4 {
+			label = "red:user4";
+			gpios = <&gpio1 0 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led {
+			label = "red:wlan";
+			gpios = <&gpio1 1 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led {
+			label = "red:bt";
+			gpios = <&gpio1 4 0>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
 };
 
 &gmac {
@@ -66,6 +112,38 @@
 				<4 27 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	leds {
+		user_led1: user_led1 {
+			rockchip,pins =
+				<4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2: user_led2 {
+			rockchip,pins =
+				<4 26 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led3: user_led3 {
+			rockchip,pins =
+				<4 30 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led4: user_led4 {
+			rockchip,pins =
+				<1 0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led: wlan_led {
+			rockchip,pins =
+				<1 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_led: bt_led {
+			rockchip,pins =
+				<1 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &usbdrd_dwc3_0 {
-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: manivannan.sadhasivam@linaro.org (Manivannan Sadhasivam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/7] arm64: dts: rockchip: ficus: Add on-board LED support
Date: Mon, 29 Oct 2018 15:12:39 +0530	[thread overview]
Message-ID: <20181029094245.7886-2-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20181029094245.7886-1-manivannan.sadhasivam@linaro.org>

Add on-board LED support for Ficus board based on the following
standard used by other 96Boards:

red:user1  default-trigger: heartbeat
red:user2  default-trigger: mmc0/disk-activity (onboard-storage)
red:user3  default-trigger: mmc1 (SD-card)
red:user4  default-trigger: none, panic-indicator
red:wlan   default-trigger: phy0tx
red:bt     default-trigger: hci0-power

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
index cce266da28cd..027d428917b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -23,6 +23,52 @@
 		clock-output-names = "clkin_gmac";
 		#clock-cells = <0>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
+			    <&user_led4>, <&wlan_led>, <&bt_led>;
+
+		user_led1 {
+			label = "red:user1";
+			gpios = <&gpio4 25 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "red:user2";
+			gpios = <&gpio4 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3 {
+			label = "red:user3";
+			gpios = <&gpio4 30 0>;
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led4 {
+			label = "red:user4";
+			gpios = <&gpio1 0 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led {
+			label = "red:wlan";
+			gpios = <&gpio1 1 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led {
+			label = "red:bt";
+			gpios = <&gpio1 4 0>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
 };
 
 &gmac {
@@ -66,6 +112,38 @@
 				<4 27 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	leds {
+		user_led1: user_led1 {
+			rockchip,pins =
+				<4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2: user_led2 {
+			rockchip,pins =
+				<4 26 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led3: user_led3 {
+			rockchip,pins =
+				<4 30 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led4: user_led4 {
+			rockchip,pins =
+				<1 0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led: wlan_led {
+			rockchip,pins =
+				<1 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_led: bt_led {
+			rockchip,pins =
+				<1 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &usbdrd_dwc3_0 {
-- 
2.17.1

  reply	other threads:[~2018-10-29  9:42 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-29  9:42 [PATCH v3 0/7] Standardize onboard LED support for 96Boards Manivannan Sadhasivam
2018-10-29  9:42 ` Manivannan Sadhasivam
2018-10-29  9:42 ` Manivannan Sadhasivam [this message]
2018-10-29  9:42   ` [PATCH v3 1/7] arm64: dts: rockchip: ficus: Add on-board LED support Manivannan Sadhasivam
2018-12-11 19:11   ` Heiko Stuebner
2018-12-11 19:11     ` Heiko Stuebner
2018-10-29  9:42 ` [PATCH v3 2/7] arm64: dts: rockchip: rock960: " Manivannan Sadhasivam
2018-10-29  9:42   ` Manivannan Sadhasivam
2018-12-11 19:11   ` Heiko Stuebner
2018-12-11 19:11     ` Heiko Stuebner
2018-10-29  9:42 ` [PATCH v3 3/7] arm64: dts: hisilicon: hikey: Standardize LED labels and triggers Manivannan Sadhasivam
2018-10-29  9:42   ` Manivannan Sadhasivam
2018-10-29  9:42 ` [PATCH v3 4/7] arm64: dts: hisilicon: hikey960: " Manivannan Sadhasivam
2018-10-29  9:42   ` Manivannan Sadhasivam
2018-10-29  9:42 ` [PATCH v3 5/7] arm64: dts: hisilicon: poplar: " Manivannan Sadhasivam
2018-10-29  9:42   ` Manivannan Sadhasivam
2018-10-29  9:42 ` [PATCH v3 6/7] arm64: dts: xilinx: ultra96: " Manivannan Sadhasivam
2018-10-29  9:42   ` Manivannan Sadhasivam
2018-12-21  2:37   ` Manivannan Sadhasivam
2018-12-21  2:37     ` Manivannan Sadhasivam
2018-12-21  6:50     ` Michal Simek
2018-12-21  6:50       ` Michal Simek
2018-12-21  6:50       ` Michal Simek
2019-01-24 16:49       ` Rob Herring
2019-01-24 16:49         ` Rob Herring
2019-01-24 16:49         ` Rob Herring
2019-01-29 13:17         ` Michal Simek
2019-01-29 13:17           ` Michal Simek
2019-01-29 13:17           ` Michal Simek
2018-10-29  9:42 ` [PATCH v3 7/7] arm64: dts: qcom: apq8016-sbc: Standardize LED labels Manivannan Sadhasivam
2018-10-29  9:42   ` Manivannan Sadhasivam
2018-12-21  2:35   ` Manivannan Sadhasivam
2018-12-21  2:35     ` Manivannan Sadhasivam
2019-02-05 19:00     ` Nicolas Dechesne
2019-02-05 19:00       ` Nicolas Dechesne
2019-02-05 19:24       ` Bjorn Andersson
2019-02-05 19:24         ` Bjorn Andersson
2018-10-31 13:38 ` [PATCH v3 0/7] Standardize onboard LED support for 96Boards Linus Walleij
2018-10-31 13:38   ` Linus Walleij
2018-10-31 13:38   ` Linus Walleij
2018-10-31 15:46   ` Michal Simek
2018-10-31 21:17     ` Linus Walleij
2018-10-31 21:17       ` Linus Walleij
2018-10-31 21:17       ` Linus Walleij
2018-11-01 10:49       ` Heiko Stübner
2018-11-01 10:49         ` Heiko Stübner
2018-11-01 10:49         ` Heiko Stübner
2018-11-29 15:42   ` Wei Xu
2018-11-29 15:42     ` Wei Xu
2018-11-29 15:42     ` Wei Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181029094245.7886-2-manivannan.sadhasivam@linaro.org \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=amit.kucheria@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=daniel.thompson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=ezequiel@collabora.com \
    --cc=heiko@sntech.de \
    --cc=koen.kooi@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=nicolas.dechesne@linaro.org \
    --cc=pavel@ucw.cz \
    --cc=robh@kernel.org \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.