From: Vinod Koul <vkoul@kernel.org>
To: Andy Gross <andy.gross@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v5 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes
Date: Fri, 9 Nov 2018 15:13:59 +0530 [thread overview]
Message-ID: <20181109094417.12109-1-vkoul@kernel.org> (raw)
This series adds support for various nodes for QCS404-EVB.
Based on v4.20-rc1
Changes in v5:
- Fix warns reported with W=12
- Fix comments by Rob
Changes in v4:
- correct the v3 post (sent wrong branch)
Changes in v3:
- Make the DTS files sorted alphabetcially and by node addresses
- Add reviewed by from Bjorn
- Split out the DTS files for EVB 1000 and EVB 4000 boards and add common
evb dts files for common part
Changes in v2:
Fix cpu binding
Bjorn Andersson (7):
arm64: dts: qcom: qcs404: Add reserved-memory regions
arm64: dts: qcom: qcs404: Add RPM GLINK related nodes
arm64: dts: qcom: qcs404: Add PMS405 RPM regulators
arm64: dts: qcom: qcs404: Add TLMM pinctrl node
arm64: dts: qcom: qcs404: Add sdcc1 node
arm64: dts: qcom: qcs404: Add scm firmware node
arm64: dts: qcom: qcs404: Add remoteproc nodes
Vinod Koul (11):
arm64: dts: qcom: qcs404: add base dts files
arm64: dts: qcom: qcs404-evb: add dts files for EVBs
arm64: dts: qcom: qcs404: add smp2p nodes
arm64: dts: qcom: pms405: add spmi node
arm64: dts: qcom: qcs404: add spmi node
arm64: dts: qcom: pms405: add rtc node
arm64: dts: qcom: pms405: add gpios
arm64: dts: qcom: qcs404: add prng-ee node
arm64: dts: qcom: qcs404: Add BAM DMA node
arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2
arm64: dts: qcom: pms405: Add pon and pwrkey nodes
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/pms405.dtsi | 55 +++
arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts | 11 +
arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 11 +
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 188 ++++++++++
arch/arm64/boot/dts/qcom/qcs404.dtsi | 490 +++++++++++++++++++++++++++
6 files changed, 757 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pms405.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/qcs404.dtsi
--
2.14.4
WARNING: multiple messages have this Message-ID (diff)
From: vkoul@kernel.org (Vinod Koul)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes
Date: Fri, 9 Nov 2018 15:13:59 +0530 [thread overview]
Message-ID: <20181109094417.12109-1-vkoul@kernel.org> (raw)
This series adds support for various nodes for QCS404-EVB.
Based on v4.20-rc1
Changes in v5:
- Fix warns reported with W=12
- Fix comments by Rob
Changes in v4:
- correct the v3 post (sent wrong branch)
Changes in v3:
- Make the DTS files sorted alphabetcially and by node addresses
- Add reviewed by from Bjorn
- Split out the DTS files for EVB 1000 and EVB 4000 boards and add common
evb dts files for common part
Changes in v2:
Fix cpu binding
Bjorn Andersson (7):
arm64: dts: qcom: qcs404: Add reserved-memory regions
arm64: dts: qcom: qcs404: Add RPM GLINK related nodes
arm64: dts: qcom: qcs404: Add PMS405 RPM regulators
arm64: dts: qcom: qcs404: Add TLMM pinctrl node
arm64: dts: qcom: qcs404: Add sdcc1 node
arm64: dts: qcom: qcs404: Add scm firmware node
arm64: dts: qcom: qcs404: Add remoteproc nodes
Vinod Koul (11):
arm64: dts: qcom: qcs404: add base dts files
arm64: dts: qcom: qcs404-evb: add dts files for EVBs
arm64: dts: qcom: qcs404: add smp2p nodes
arm64: dts: qcom: pms405: add spmi node
arm64: dts: qcom: qcs404: add spmi node
arm64: dts: qcom: pms405: add rtc node
arm64: dts: qcom: pms405: add gpios
arm64: dts: qcom: qcs404: add prng-ee node
arm64: dts: qcom: qcs404: Add BAM DMA node
arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2
arm64: dts: qcom: pms405: Add pon and pwrkey nodes
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/pms405.dtsi | 55 +++
arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts | 11 +
arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 11 +
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 188 ++++++++++
arch/arm64/boot/dts/qcom/qcs404.dtsi | 490 +++++++++++++++++++++++++++
6 files changed, 757 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pms405.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/qcs404.dtsi
--
2.14.4
next reply other threads:[~2018-11-09 9:43 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-09 9:43 Vinod Koul [this message]
2018-11-09 9:43 ` [PATCH v5 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
2018-11-09 9:44 ` [PATCH v5 01/18] arm64: dts: qcom: qcs404: add base dts files Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-17 23:10 ` Bjorn Andersson
2018-11-17 23:10 ` Bjorn Andersson
2018-11-09 9:44 ` [PATCH v5 02/18] arm64: dts: qcom: qcs404-evb: add dts files for EVBs Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-17 23:11 ` Bjorn Andersson
2018-11-17 23:11 ` Bjorn Andersson
2018-11-19 12:01 ` Amit Kucheria
2018-11-19 12:01 ` Amit Kucheria
2018-11-09 9:44 ` [PATCH v5 03/18] arm64: dts: qcom: qcs404: Add reserved-memory regions Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 04/18] arm64: dts: qcom: qcs404: Add RPM GLINK related nodes Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 05/18] arm64: dts: qcom: qcs404: Add PMS405 RPM regulators Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 06/18] arm64: dts: qcom: qcs404: add smp2p nodes Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 07/18] arm64: dts: qcom: qcs404: Add TLMM pinctrl node Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 08/18] arm64: dts: qcom: qcs404: Add sdcc1 node Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 09/18] arm64: dts: qcom: pms405: add spmi node Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 10/18] arm64: dts: qcom: qcs404: " Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 11/18] arm64: dts: qcom: pms405: add rtc node Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 12/18] arm64: dts: qcom: pms405: add gpios Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-17 23:12 ` Bjorn Andersson
2018-11-17 23:12 ` Bjorn Andersson
2018-11-09 9:44 ` [PATCH v5 13/18] arm64: dts: qcom: qcs404: Add scm firmware node Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 14/18] arm64: dts: qcom: qcs404: Add remoteproc nodes Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-19 5:31 ` Sibi Sankar
2018-11-19 5:31 ` Sibi Sankar
2018-11-09 9:44 ` [PATCH v5 15/18] arm64: dts: qcom: qcs404: add prng-ee node Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 16/18] arm64: dts: qcom: qcs404: Add BAM DMA node Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 17/18] arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2 Vinod Koul
2018-11-09 9:44 ` Vinod Koul
2018-11-09 9:44 ` [PATCH v5 18/18] arm64: dts: qcom: pms405: Add pon and pwrkey nodes Vinod Koul
2018-11-09 9:44 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181109094417.12109-1-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=andy.gross@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.