From: Vinod Koul <vkoul@kernel.org> To: Andy Gross <andy.gross@linaro.org> Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Bjorn Andersson <bjorn.andersson@linaro.org>, Vinod Koul <vkoul@kernel.org> Subject: [PATCH v5 08/18] arm64: dts: qcom: qcs404: Add sdcc1 node Date: Fri, 9 Nov 2018 15:14:07 +0530 [thread overview] Message-ID: <20181109094417.12109-9-vkoul@kernel.org> (raw) In-Reply-To: <20181109094417.12109-1-vkoul@kernel.org> From: Bjorn Andersson <bjorn.andersson@linaro.org> Add the sdcc1 node and enable it for the QCS404-EVB. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 64 ++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/qcs404.dtsi | 17 +++++++++ 2 files changed, 81 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index d1ba8b8ece46..358d6d5f7d85 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -109,3 +109,67 @@ }; }; }; + +&sdcc1 { + status = "ok"; + + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + dreive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + dreive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index d32b91480dc1..1b3e21c1fed9 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -181,6 +181,23 @@ reg = <0x01905000 0x20000>; }; + sdcc1: sdcc@7804000 { + compatible = "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x7805000 0x1000>; + reg-names = "hc_mem", "cmdq_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + status = "disabled"; + }; + blsp1_uart2: serial@78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b1000 0x200>; -- 2.14.4
WARNING: multiple messages have this Message-ID (diff)
From: vkoul@kernel.org (Vinod Koul) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 08/18] arm64: dts: qcom: qcs404: Add sdcc1 node Date: Fri, 9 Nov 2018 15:14:07 +0530 [thread overview] Message-ID: <20181109094417.12109-9-vkoul@kernel.org> (raw) In-Reply-To: <20181109094417.12109-1-vkoul@kernel.org> From: Bjorn Andersson <bjorn.andersson@linaro.org> Add the sdcc1 node and enable it for the QCS404-EVB. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 64 ++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/qcs404.dtsi | 17 +++++++++ 2 files changed, 81 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index d1ba8b8ece46..358d6d5f7d85 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -109,3 +109,67 @@ }; }; }; + +&sdcc1 { + status = "ok"; + + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + dreive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + dreive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index d32b91480dc1..1b3e21c1fed9 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -181,6 +181,23 @@ reg = <0x01905000 0x20000>; }; + sdcc1: sdcc at 7804000 { + compatible = "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x7805000 0x1000>; + reg-names = "hc_mem", "cmdq_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + status = "disabled"; + }; + blsp1_uart2: serial at 78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b1000 0x200>; -- 2.14.4
next prev parent reply other threads:[~2018-11-09 9:44 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-11-09 9:43 [PATCH v5 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul 2018-11-09 9:43 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 01/18] arm64: dts: qcom: qcs404: add base dts files Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-17 23:10 ` Bjorn Andersson 2018-11-17 23:10 ` Bjorn Andersson 2018-11-09 9:44 ` [PATCH v5 02/18] arm64: dts: qcom: qcs404-evb: add dts files for EVBs Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-17 23:11 ` Bjorn Andersson 2018-11-17 23:11 ` Bjorn Andersson 2018-11-19 12:01 ` Amit Kucheria 2018-11-19 12:01 ` Amit Kucheria 2018-11-09 9:44 ` [PATCH v5 03/18] arm64: dts: qcom: qcs404: Add reserved-memory regions Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 04/18] arm64: dts: qcom: qcs404: Add RPM GLINK related nodes Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 05/18] arm64: dts: qcom: qcs404: Add PMS405 RPM regulators Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 06/18] arm64: dts: qcom: qcs404: add smp2p nodes Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 07/18] arm64: dts: qcom: qcs404: Add TLMM pinctrl node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` Vinod Koul [this message] 2018-11-09 9:44 ` [PATCH v5 08/18] arm64: dts: qcom: qcs404: Add sdcc1 node Vinod Koul 2018-11-09 9:44 ` [PATCH v5 09/18] arm64: dts: qcom: pms405: add spmi node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 10/18] arm64: dts: qcom: qcs404: " Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 11/18] arm64: dts: qcom: pms405: add rtc node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 12/18] arm64: dts: qcom: pms405: add gpios Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-17 23:12 ` Bjorn Andersson 2018-11-17 23:12 ` Bjorn Andersson 2018-11-09 9:44 ` [PATCH v5 13/18] arm64: dts: qcom: qcs404: Add scm firmware node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 14/18] arm64: dts: qcom: qcs404: Add remoteproc nodes Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-19 5:31 ` Sibi Sankar 2018-11-19 5:31 ` Sibi Sankar 2018-11-09 9:44 ` [PATCH v5 15/18] arm64: dts: qcom: qcs404: add prng-ee node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 16/18] arm64: dts: qcom: qcs404: Add BAM DMA node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 17/18] arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2 Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 18/18] arm64: dts: qcom: pms405: Add pon and pwrkey nodes Vinod Koul 2018-11-09 9:44 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181109094417.12109-9-vkoul@kernel.org \ --to=vkoul@kernel.org \ --cc=andy.gross@linaro.org \ --cc=bjorn.andersson@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.